Give thanks to your cleaning equipment with 10% off parts and equipment. Use offer code: NOV24

Some exclusions apply

HYDRO 2800-DISK

HYDRO 2800-DISK

Nilfisk-Advance HYDRO 2800-DISK

Interested in purchasing equipment?

Contact our Experts!

Need help finding a part?

Ask our Team! The Hydro-Retriever 2800 Rider Scrubber makes floor scrubbing easy. The 2800 maneuvers in and out of tight spaces applying solution, scrubbing floors cleans, and picking up all of the dirty solution in one pass. Floors are left clean and dry in one pass.

The 28" (71 cm) Hydro-Retriever 2800 models can clean up to 40,410 square feet (3754 m2) per hour, and with the optional 32" cylindrical deck, cleans up to 46,200 square feet (4292 m2) per hour- high performance and high production.

The 28" (71 cm) 2800 models being only 33 inches (84 cm) wide can maneuver in narrow aisles and through congested areas. More importantly, it can drive and scrub through standard 36 inch (91 cm) doorways while leaving a clean, dry path behind.

The Hydro-Retriever 2800 can be ordered with either disc-type scrub brushes (model 2800), or a cylindrical scrub brush (model 2800C and 2800C w/32C). Disc brushes bring more scrub pressure to bear on smooth floors with stubborn dirt build up. Cylindrical brush bristles get
into floors seams or between tiles, and sweep up light debris, to eliminate pre-sweeping.

Cleaning Width: 28” (71 cm) and 32” (81 cm)
Coverage Rate: 40,410 sq. ft. (3754 m2)/hour (28”)
Solution Tank: 28 gal. (106 l) capacity, roto-molded polyethylene, w/drain hose
Solution feed Electric solenoid valve for on/off control,
system: manual ball valve for flow control, and inline filter. Maximum 0.75 gal./min. (2.8 l/min.) flow rate
Recovery Tank: 28 gal. (106 l) capacity, roto-molded polyethylene tank, equipped w/ball-float vacuum air shutoff. 28 in. (71 cm) long, 1.5 in. (3.8 cm) diameter drain hose.
Scrub Brushes: 2800 – Two 14.5 in. (37 cm) dia. disc brushes or pad holders.
Brush Speed: Disc brush model – 300 r.p.m
Brush Pressure: Variable to 600 lbs. (272 kg) based on actuator rating
Brush Drive: Disc brush model – 1.5 hp, 1120 watt motor w/two right-angle worm gear drives to brushes. Electronic current sensing adjusts for normal and heavy scrubbing.
Scrub Deck: Disc brush model – Auto-adjusting side skirts constrain solution even on 180° turns
Vacuum Motor: .75 hp, 560 watt, three-stage
Squeegee: 2800 and 2800C – 33” (84 cm)
Drive System: .80 hp, 600 watt motor with gear transmission, disc brake and dynamic braking. Programmable speeds up to 3.8 mph (6.1 kph) transport, and 3.3 mph (5.3 kph) scrubbing.
Power Source: Four 6 v/395 AH (@ 20 hour rate) batteries.
Sound Level: 75 dBA @ operator position.
Min. Turn-around Aisle Width: 65” (165 cm) right or left
Weight: w/o batteries – 575 lbs. (261 kg) w/batteries – 1052 lbs. (477 kg)
Shipping – 1320 lbs. (599 kg) w/battys.

HYDRO 2800-DISK

Interested in purchasing equipment?

Contact our Experts

Need help finding a part?

Ask our Team!
The Hydro-Retriever 2800 Rider Scrubber makes floor scrubbing easy. The 2800 maneuvers in and out of tight spaces applying solution, scrubbing floors cleans, and picking up all of the dirty solution in one pass. Floors are left clean and dry in one pass.

The 28" (71 cm) Hydro-Retriever 2800 models can clean up to 40,410 square feet (3754 m2) per hour, and with the optional 32" cylindrical deck, cleans up to 46,200 square feet (4292 m2) per hour- high performance and high production.

The 28" (71 cm) 2800 models being only 33 inches (84 cm) wide can maneuver in narrow aisles and through congested areas. More importantly, it can drive and scrub through standard 36 inch (91 cm) doorways while leaving a clean, dry path behind.

The Hydro-Retriever 2800 can be ordered with either disc-type scrub brushes (model 2800), or a cylindrical scrub brush (model 2800C and 2800C w/32C). Disc brushes bring more scrub pressure to bear on smooth floors with stubborn dirt build up. Cylindrical brush bristles get
into floors seams or between tiles, and sweep up light debris, to eliminate pre-sweeping.

Cleaning Width: 28” (71 cm) and 32” (81 cm)
Coverage Rate: 40,410 sq. ft. (3754 m2)/hour (28”)
Solution Tank: 28 gal. (106 l) capacity, roto-molded polyethylene, w/drain hose
Solution feed Electric solenoid valve for on/off control,
system: manual ball valve for flow control, and inline filter. Maximum 0.75 gal./min. (2.8 l/min.) flow rate
Recovery Tank: 28 gal. (106 l) capacity, roto-molded polyethylene tank, equipped w/ball-float vacuum air shutoff. 28 in. (71 cm) long, 1.5 in. (3.8 cm) diameter drain hose.
Scrub Brushes: 2800 – Two 14.5 in. (37 cm) dia. disc brushes or pad holders.
Brush Speed: Disc brush model – 300 r.p.m
Brush Pressure: Variable to 600 lbs. (272 kg) based on actuator rating
Brush Drive: Disc brush model – 1.5 hp, 1120 watt motor w/two right-angle worm gear drives to brushes. Electronic current sensing adjusts for normal and heavy scrubbing.
Scrub Deck: Disc brush model – Auto-adjusting side skirts constrain solution even on 180° turns
Vacuum Motor: .75 hp, 560 watt, three-stage
Squeegee: 2800 and 2800C – 33” (84 cm)
Drive System: .80 hp, 600 watt motor with gear transmission, disc brake and dynamic braking. Programmable speeds up to 3.8 mph (6.1 kph) transport, and 3.3 mph (5.3 kph) scrubbing.
Power Source: Four 6 v/395 AH (@ 20 hour rate) batteries.
Sound Level: 75 dBA @ operator position.
Min. Turn-around Aisle Width: 65” (165 cm) right or left
Weight: w/o batteries – 575 lbs. (261 kg) w/batteries – 1052 lbs. (477 kg)
Shipping – 1320 lbs. (599 kg) w/battys.

Nilfisk-Advance HYDRO 2800-DISK Parts and Support

the hydro-retriever 2800 rider scrubber makes floor scrubbing easy. the 2800 maneuvers in and out of tight spaces applying solution, scrubbing floors cleans, and picking up all of the dirty solution in one pass. floors are left clean and dry in one pass.

the 28" (71 cm) hydro-retriever 2800 models can clean up to 40,410 square feet (3754 m2) per hour, and with the optional 32" cylindrical deck, cleans up to 46,200 square feet (4292 m2) per hour- high performance and high production.

the 28" (71 cm) 2800 models being only 33 inches (84 cm) wide can maneuver in narrow aisles and through congested areas. more importantly, it can drive and scrub through standard 36 inch (91 cm) doorways while leaving a clean, dry path behind.

the hydro-retriever 2800 can be ordered with either disc-type scrub brushes (model 2800), or a cylindrical scrub brush (model 2800c and 2800c w/32c). disc brushes bring more scrub pressure to bear on smooth floors with stubborn dirt build up. cylindrical brush bristles get
into floors seams or between tiles, and sweep up light debris, to eliminate pre-sweeping.

cleaning width: 28” (71 cm) and 32” (81 cm)
coverage rate: 40,410 sq. ft. (3754 m2)/hour (28”)
solution tank: 28 gal. (106 l) capacity, roto-molded polyethylene, w/drain hose
solution feed electric solenoid valve for on/off control,
system: manual ball valve for flow control, and inline filter. maximum 0.75 gal./min. (2.8 l/min.) flow rate
recovery tank: 28 gal. (106 l) capacity, roto-molded polyethylene tank, equipped w/ball-float vacuum air shutoff. 28 in. (71 cm) long, 1.5 in. (3.8 cm) diameter drain hose.
scrub brushes: 2800 – two 14.5 in. (37 cm) dia. disc brushes or pad holders.
brush speed: disc brush model – 300 r.p.m
brush pressure: variable to 600 lbs. (272 kg) based on actuator rating
brush drive: disc brush model – 1.5 hp, 1120 watt motor w/two right-angle worm gear drives to brushes. electronic current sensing adjusts for normal and heavy scrubbing.
scrub deck: disc brush model – auto-adjusting side skirts constrain solution even on 180° turns
vacuum motor: .75 hp, 560 watt, three-stage
squeegee: 2800 and 2800c – 33” (84 cm)
drive system: .80 hp, 600 watt motor with gear transmission, disc brake and dynamic braking. programmable speeds up to 3.8 mph (6.1 kph) transport, and 3.3 mph (5.3 kph) scrubbing.
power source: four 6 v/395 ah (@ 20 hour rate) batteries.
sound level: 75 dba @ operator position.
min. turn-around aisle width: 65” (165 cm) right or left
weight: w/o batteries – 575 lbs. (261 kg) w/batteries – 1052 lbs. (477 kg)
shipping – 1320 lbs. (599 kg) w/battys.

Parts

  • Product
  • Qty in Cart
  • Quantity
  • Price
  • Subtotal
  • ships same day
    OEM
    56109566 - 90 degree barbed elbow 172-4056

    90 degree barbed elbow 172-4056

    $9.60
    Specifications:Length: 1.5 in Width: 1.5 in Height: 1.5 in Weight: 0.006 poundsType: 90 degreeMaterial: PlasticSize of First Fitting End: .375 IN &emdash; MaleSize of Second Fitting End: .625 IN &emdash;...
    $9.60
    Qty in Cart: 0
    Price:
    $9.60
    Subtotal:
  • ships same day
    OEM
    409485 - Battery cable 172-8828

    Battery cable 172-8828

    $42.65
    Matches:4094855640948588046300Commonly purchased together:Fits on:Nilfisk-Advance Liberty SC60Nilfisk-Advance ADVOLUTION 2710Nilfisk-Advance HYDRO 2800-DISKNilfisk-Advance WHIRLAMATIC 2700Nilfisk-Advance ES4000Nilfisk-Advance HYDRO...
    $42.65
    Qty in Cart: 0
    Price:
    $42.65
    Subtotal:
  • OEM
    56302164 - Flanged bearing 172-8919

    Flanged bearing 172-8919

    $10.90
    Matches:3021645630216486726920Commonly purchased together:May fit on these models - select model and diagram to confirmNilfisk-Advance Liberty SC60Nilfisk-Advance ADVENGER 2810DNilfisk-Advance ADVOLUTION 2710Nilfisk-Advance ADVENGER...
    $10.90
    Qty in Cart: 0
    Price:
    $10.90
    Subtotal:
  • ships same day
    Non-OEM
     - Vacuum motor gasket 991-3029

    Vacuum motor gasket 991-3029

    $1.89
    Matches:2232648.806-692.0Alternative items:Below are other options that may meet your needs.GASKET, 20/24 VAC MOTOR$2.07993-0017Commonly purchased together:May fit on these models - select model and diagram to confirmTennant 5680Tennant...
    $1.89
    Qty in Cart: 0
    Price:
    $1.89
    Subtotal:
  • OEM
    407559 - Drive end assembly 172-8933

    Drive end assembly 172-8933

    $271.13
    Matches:272-215131540840746840755956315408564074685640755986734890Commonly purchased together:May fit on these models - select model and diagram to confirmNilfisk-Advance CONVERTAMATIC 26D-CNilfisk-Advance C-MAX34STNilfisk-Advance SC750Nilfisk-Advance...
    $271.13
    Qty in Cart: 0
    Price:
    $271.13
    Subtotal:
  • OEM
    407447 - Gum rubber skirt 172-8874

    Gum rubber skirt 172-8874

    $19.09
    Specifications:Weight: 0.337 poundsMatches:172-890740744756407447Alternative items:Below are other options that may meet your needs.KIT SCRUB DECK SQUEEGEE$18.85993-0753Commonly purchased together:May fit on these models - select model and diagram to...
    $19.09
    Qty in Cart: 0
    Price:
    $19.09
    Subtotal:
  • ships same day
    Non-OEM
    782713 W/ L800P - 13 inch Pad driver 996-0061

    13 inch Pad driver 996-0061

    $35.51
    Specifications:Weight: 3.162 poundsMatches:782713 W/ L800P782713K W/L800P996-0188996-0525996-0593Commonly purchased together:May fit on these models - select model and diagram to confirmNilfisk-Advance CONVERTAMATIC 260BNilfisk-Advance SC900Viper FANG...
    $35.51
    Qty in Cart: 0
    Price:
    $35.51
    Subtotal:
  • OEM
    412089 - 150amp fuse 172-8836

    150amp fuse 172-8836

    $17.41
    Specifications:Weight: 0.037 poundsType: FuseMatches:41208956412089Alternative items:Below are other options that may meet your needs.150amp fuse$43.25991-3061FUSE 150AMP$38.10993-0802Commonly purchased together:May fit on these models - select model and...
    $17.41
    Qty in Cart: 0
    Price:
    $17.41
    Subtotal:
  • OEM
    407434 - Right belt guard 172-8929

    Right belt guard 172-8929

    $35.48
    Matches:4074345640743491012250Fits on:Nilfisk-Advance C-MAX34STNilfisk-Advance ADVENGER 2810DNilfisk-Advance HYDRO 2800-DISKNilfisk-Advance ADVENGER 3210DNilfisk-Advance ADGRESSOR 3820DNilfisk-Advance AQUA RIDE SENilfisk-Advance ADVENGER...
    $35.48
    Qty in Cart: 0
    Price:
    $35.48
    Subtotal:
  • Non-OEM
     - 24V 3 stage vacuum motor tangential with Packard plug 991-1210-P

    24V 3 stage vacuum motor tangential with Packard plug 991-1210-P

    $76.40
    The 993- part option does not include the Packard plug.Specifications:Weight: 6.2 poundsMatches:119433-07564122189002562991-1210Alternative items:Below are other options that may meet your needs.24V 3STG VAC Motor Ametek$177.76993-1738VACUUM MOTOR KIT...
    $76.40
    Qty in Cart: 0
    Price:
    $76.40
    Subtotal:
  • Non-OEM
    816513 W/L800P - 13 inch medium grit scrubbing brush - 180 grit 996-0120

    13 inch medium grit scrubbing brush - 180 grit 996-0120

    $253.46
    Specifications:Weight: 8 poundsMatches:816513 W/L800P996-0119May fit on these models - select model and diagram to confirmNilfisk-Advance CONVERTAMATIC 260BNilfisk-Advance SC900Viper FANG 28TNilfisk-Advance ADVENGER 2810DNSS Enterprises WRANGLER 27...
    $253.46
    Qty in Cart: 0
    Price:
    $253.46
    Subtotal:
  • Non-OEM
    772413 W/L800P - 13 inch polypropelene scrubbing brush 996-0282

    13 inch polypropelene scrubbing brush 996-0282

    $88.90
    Specifications:Weight: 8 poundsSize of Brush: 13Size of Block: 12Color: BlackType / Function: PolypropeleneMatches:772413 W/L800P996-0588Commonly purchased together:May fit on these models - select model and diagram to confirmNilfisk-Advance SC900Viper...
    $88.90
    Qty in Cart: 0
    Price:
    $88.90
    Subtotal:
  • Total: items /

Adding your products to cart

Can't find what you need? Click here or call 1-800-USA-CLEAN
In the market for a new machine? You can find quality new and reconditioned floor care equipment at one of our vendor partners:
best live chat