Exclusive Hygenic® tanks allow for easy access and help reduce mold, bacteria, and other contaminants that can grow in enclosed tanks.
Clean Any Time
Quiet operation means more flexible cleaning schedules.
Don’t Leave Behind Cleaning Solution
Even around 180-degree turns, the T3’s equal-pressure, parabolic squeegee recovers cleaning solution from the floor.
Engineered For Safety
Minimize the risk of slip-and-fall injuries with clean, dry, and safe floors by scrubbing with ec-H2O™ and FaST® technologies.
Reduce operator fatigue and increase productivity. Ergonomic design makes cleaning with the T3 more comfortable. Increase scrubbing effectiveness and quality. Clear sight lines and simple controls mean operators can focus solely on their cleaning environment.
-Easily train new operators to use the simple, intuitive controls.
-Solution and recovery tanks easily cleanable. Exclusive Hygienic® tanks are fully accessible for sanitization.
-Quickly remove and replace brushes and squeegees. Plus, with the “no hassle” squeegee system, there are no tools for maintenance, and the blade is factory set at the optimum recovery angle.
-Eliminate the need for follow-up passes and non-productive mop-ups. A fully self-adjusting splash skirt captures scrub deck overspray.
-Scrub longer on a single tank with Green Seal certified FaST Foam Scrubbing Technology or ec-H2O technology.
-Save time and storage space with the onboard charger.
-Eliminate operator contact with wastewater and prevent clogged hoses/drains with the convenient debris tray.
Cleaning path 17 in / 430 mm
Productivity (per hour)
Theoretical Max 20,230 ft2 / 1,900 m2
Estimated Coverage*
Conventional 8,440 ft2/ 780 m2
ec-H2O / FaST 11,250 ft2/ 1,050 m2
Brush motor horsepower 1.0 hp
Brush RPM 230 rpm
Brush/pad pressure 50 lbs / 23 kg & 90 lbs / 41 kg
Solution tank description Full access & cleanable
Solution capacity 10.5 gal / 40 L
Recovery tank description Full access & cleanable
Recovery tank capacity 15 gal / 57 L
(include demisting chamber)
Vacuum motor 0.5 hp – two stage
Vac motor CFM 65 cfm / 1.84 cmm
Vac motor sealed waterlift 40 in / 1,020 mm
System voltage 24 volt
Battery amp hour rating 105 AH @ 20 hr
Battery run time (continuous cleaning rating) 2.5 hours
Product length 48 in / 1,220 mm
Product width (with squeegee) 30 in / 760 mm
Product height 43 in / 1,090 mm
Product weight (with batteries) 319 lbs / 145 kg
Power consumption amps 27 amp nominal
Sound level (operator’s ear) 68.5 dBA
Tennant T3 Parts and Support
improve environmental health in your facility
exclusive hygenic® tanks allow for easy access and help reduce mold, bacteria, and other contaminants that can grow in enclosed tanks.
clean any time
quiet operation means more flexible cleaning schedules.
don’t leave behind cleaning solution
even around 180-degree turns, the t3’s equal-pressure, parabolic squeegee recovers cleaning solution from the floor.
engineered for safety
minimize the risk of slip-and-fall injuries with clean, dry, and safe floors by scrubbing with ec-h2o™ and fast® technologies.
reduce operator fatigue and increase productivity. ergonomic design makes cleaning with the t3 more comfortable. increase scrubbing effectiveness and quality. clear sight lines and simple controls mean operators can focus solely on their cleaning environment.
-easily train new operators to use the simple, intuitive controls.
-solution and recovery tanks easily cleanable. exclusive hygienic® tanks are fully accessible for sanitization.
-quickly remove and replace brushes and squeegees. plus, with the “no hassle” squeegee system, there are no tools for maintenance, and the blade is factory set at the optimum recovery angle.
-eliminate the need for follow-up passes and non-productive mop-ups. a fully self-adjusting splash skirt captures scrub deck overspray.
-scrub longer on a single tank with green seal certified fast foam scrubbing technology or ec-h2o technology.
-save time and storage space with the onboard charger.
-eliminate operator contact with wastewater and prevent clogged hoses/drains with the convenient debris tray.
cleaning path 17 in / 430 mm
productivity (per hour)
theoretical max 20,230 ft2 / 1,900 m2
estimated coverage*
conventional 8,440 ft2/ 780 m2
ec-h2o / fast 11,250 ft2/ 1,050 m2
brush motor horsepower 1.0 hp
brush rpm 230 rpm
brush/pad pressure 50 lbs / 23 kg & 90 lbs / 41 kg
solution tank description full access & cleanable
solution capacity 10.5 gal / 40 l
recovery tank description full access & cleanable
recovery tank capacity 15 gal / 57 l
(include demisting chamber)
vacuum motor 0.5 hp – two stage
vac motor cfm 65 cfm / 1.84 cmm
vac motor sealed waterlift 40 in / 1,020 mm
system voltage 24 volt
battery amp hour rating 105 ah @ 20 hr
battery run time (continuous cleaning rating) 2.5 hours
product length 48 in / 1,220 mm
product width (with squeegee) 30 in / 760 mm
product height 43 in / 1,090 mm
product weight (with batteries) 319 lbs / 145 kg
power consumption amps 27 amp nominal
sound level (operator’s ear) 68.5 dba
exclusive hygenic® tanks allow for easy access and help reduce mold, bacteria, and other contaminants that can grow in enclosed tanks.
clean any time
quiet operation means more flexible cleaning schedules.
don’t leave behind cleaning solution
even around 180-degree turns, the t3’s equal-pressure, parabolic squeegee recovers cleaning solution from the floor.
engineered for safety
minimize the risk of slip-and-fall injuries with clean, dry, and safe floors by scrubbing with ec-h2o™ and fast® technologies.
reduce operator fatigue and increase productivity. ergonomic design makes cleaning with the t3 more comfortable. increase scrubbing effectiveness and quality. clear sight lines and simple controls mean operators can focus solely on their cleaning environment.
-easily train new operators to use the simple, intuitive controls.
-solution and recovery tanks easily cleanable. exclusive hygienic® tanks are fully accessible for sanitization.
-quickly remove and replace brushes and squeegees. plus, with the “no hassle” squeegee system, there are no tools for maintenance, and the blade is factory set at the optimum recovery angle.
-eliminate the need for follow-up passes and non-productive mop-ups. a fully self-adjusting splash skirt captures scrub deck overspray.
-scrub longer on a single tank with green seal certified fast foam scrubbing technology or ec-h2o technology.
-save time and storage space with the onboard charger.
-eliminate operator contact with wastewater and prevent clogged hoses/drains with the convenient debris tray.
cleaning path 17 in / 430 mm
productivity (per hour)
theoretical max 20,230 ft2 / 1,900 m2
estimated coverage*
conventional 8,440 ft2/ 780 m2
ec-h2o / fast 11,250 ft2/ 1,050 m2
brush motor horsepower 1.0 hp
brush rpm 230 rpm
brush/pad pressure 50 lbs / 23 kg & 90 lbs / 41 kg
solution tank description full access & cleanable
solution capacity 10.5 gal / 40 l
recovery tank description full access & cleanable
recovery tank capacity 15 gal / 57 l
(include demisting chamber)
vacuum motor 0.5 hp – two stage
vac motor cfm 65 cfm / 1.84 cmm
vac motor sealed waterlift 40 in / 1,020 mm
system voltage 24 volt
battery amp hour rating 105 ah @ 20 hr
battery run time (continuous cleaning rating) 2.5 hours
product length 48 in / 1,220 mm
product width (with squeegee) 30 in / 760 mm
product height 43 in / 1,090 mm
product weight (with batteries) 319 lbs / 145 kg
power consumption amps 27 amp nominal
sound level (operator’s ear) 68.5 dba
Parts
Can't find what you need? Click here or call 1-800-USA-CLEAN
In the market for a new machine? You can find quality new and reconditioned floor care equipment at one of our vendor partners:
Need a professional? We offer service both virtually and in person.
Learn more
Diagrams
- View all diagrams
- - Frequently Replaced Parts
- - Frequently Replaced Parts - 20 inch
- - Batteries
- - Brushes - 17 inch
- - Brushes - 20 inch
- - Chargers
- - Know Your Machine
- - Pad Holders
- - Pads - 17 inch
- - Pads - 20 inch
- - Simplified Electrical System - ec-H2O
- - Simplified Electrical System - Standard
- - Simplified Recovery System
- - Simplified Solution System - ec-H2O
- - Simplified Solution System - FaST
- - Simplified Solution System - Standard
- Battery Group
- Brush Motor Assembly - NON-OEM
- Dual Disk Scrub Head Assembly - Lower
- Dual Disk Scrub Head Assembly - Upper
- ec-H2O Module Assembly
- FaST Injector Assembly
- Front Control Console Assembly
- HydroLink Battery Watering System Kit
- Off-Board Battery Charger Assembly
- Onboard Battery Charger Assembly
- Rear Control Console Assembly
- Recovery Tank Assembly
- Scrub Head Assembly
- Scrub Head Lift Assembly
- Solution Assembly - ec-H2O Model
- Solution Assembly - FaST Model
- Solution Assembly - Standard Model
- Solution Tank Assembly - Lower
- Solution Tank Assembly - Upper
- Squeegee Assembly
- Vacuum Fan Assembly
- Wheel Assembly
- Wire Harness Diagram - Brush Assist Model 1
- Wire Harness Diagram - Brush Assist Model 2
- Wire Harness Diagram - Drive Model 1
- Wire Harness Diagram - Drive Model 2
- Wiring Diagram - Brush Assist ec-H2O Models
- Wiring Diagram - Brush Assist Standard and FaST Models
- Wiring Diagram - Drive ec-H2O Models
- Wiring Diagram - Drive Standard and FaST Models
Manuals
- TENNANT - T3 - Parts Manual - 11.2015
- TENNANT - T3 - User Manual - After SN 10309874
- TENNANT - T3 - User Manual - Before SN 10309875
- Tennant ecH2O Service Testing
Bulletins
- TENNANT - T3 -ec-H20 Controller Replacement Kit
- Brush Motor - Replacement Kit
- Motor Upgrade Kit - Replacing NON-OEM Motor 991-2121
- TENNANT - T3 - ec-H2O Module E-Cell Replacement Kit
- TENNANT - T3 - ec-H2O Module Replacement Kit
- TENNANT - T3 - FaST Injector Assembly Conversion Kit (before SN10346875)
- TENNANT - T3 - HydroLINK Battery Watering Kit
- TENNANT - T3 - Install conduit onto FaST-Pak carton hose
- TENNANT - T3 - Replace FaST system orifice
- TENNANT - T3 - Switch Fastener Kit (before SN10350428)
- TENNANT - T3 - Transaxle Replacement Kit
- TENNANT- T3/T5/T7/T20/M20 TSS Bulletin - FaST-pak Hose Bending and Crimping
Repair Guides
- REPLACING THE VAC MOTOR
- ADJUSTING THE POTENTIOMETER
- REPLACING THE SQUEEGEE BLADES
- Cleaning and Replacing the Solution Filter