The 20-inch (51-cm) brush unit allows for very efficient cleaning of floors and close along walls, leading to improved performance. The 11-gallon (40L) tank volume and the patented IntelliFlow radically increase performance and reduce time-consuming tank filling stops during the cleaning operation. The patented brush follows the floor profile and delivers nearly even pressure allocation along the full working width, which leads to excellent soil removal.
The new, patented V-shaped squeegee enables excellent water pick-up on the floor. Due to the proven three-wheel concept, adjustments of the squeegee are no longer necessary.
The use of high-tech material and long life components enhance uptime while reducing service and repair costs to a minimum. With easy maintenance on all components that require frequent maintenance. These components are color-coded yellow and can be removed easily without tools. The dashboard is self-explanatory and displays all relevant information. These features allow trouble-free operation and require minimum operator training. Interactive Service Guide
TASKI by Diversey SWINGO 855B Parts and Support
The TASKI swingo 855 B autoscrubber is an agile machine, which is easy to handle while offering increased productivity due to its wide working width.
The 20-inch (51-cm) brush unit allows for very efficient cleaning of floors and close along walls, leading to improved performance. The 11-gallon (40L) tank volume and the patented IntelliFlow radically increase performance and reduce time-consuming tank filling stops during the cleaning operation. The patented brush follows the floor profile and delivers nearly even pressure allocation along the full working width, which leads to excellent soil removal.
The new, patented V-shaped squeegee enables excellent water pick-up on the floor. Due to the proven three-wheel concept, adjustments of the squeegee are no longer necessary.
The use of high-tech material and long life components enhance uptime while reducing service and repair costs to a minimum. With easy maintenance on all components that require frequent maintenance. These components are color-coded yellow and can be removed easily without tools. The dashboard is self-explanatory and displays all relevant information. These features allow trouble-free operation and require minimum operator training.
The 20-inch (51-cm) brush unit allows for very efficient cleaning of floors and close along walls, leading to improved performance. The 11-gallon (40L) tank volume and the patented IntelliFlow radically increase performance and reduce time-consuming tank filling stops during the cleaning operation. The patented brush follows the floor profile and delivers nearly even pressure allocation along the full working width, which leads to excellent soil removal.
The new, patented V-shaped squeegee enables excellent water pick-up on the floor. Due to the proven three-wheel concept, adjustments of the squeegee are no longer necessary.
The use of high-tech material and long life components enhance uptime while reducing service and repair costs to a minimum. With easy maintenance on all components that require frequent maintenance. These components are color-coded yellow and can be removed easily without tools. The dashboard is self-explanatory and displays all relevant information. These features allow trouble-free operation and require minimum operator training.
Parts
Can't find what you need? Click here or call 1-800-USA-CLEAN
In the market for a new machine? You can find quality new and reconditioned floor care equipment at one of our vendor partners:
Need a professional? We offer service both virtually and in person.
Learn more
Diagrams
- View all diagrams
- - Frequently Replaced Parts
- - Batteries, Brushes and Charger - Machines Sold Before 2016
- - Batteries, Brushes and Charger - Machines Starting in 2016
- - Know Your Machine - Eco Model
- - Know Your Machine - Power Model
- - Manufacturer Recommended Stocking Parts
- - Pad Holders
- - Simplified Electrical System - Eco Model
- - Simplified Electrical System - Power Model
- - Simplified Recovery System
- - Simplified Solution System
- Battery Connection Diagram
- Brush Drive Assembly - Series 01
- Brush Drive Assembly - Series 02 and 03
- Brush Lowering Assembly
- Brush Motor and Tank Assembly - Series 01 and 02
- Brush Motor and Tank Assembly - Series 03
- Dashboard Comparison
- Drive Wheel Assembly
- Electrical Diagram - 855R
- Electrical Diagram - Series 01 and 02
- Electrical Diagram - Series 03
- Electrical Parts
- Handle Assembly
- Hoses and Filters Assembly Series 01 and 02
- Hoses and Filters Assembly Series 03
- Intellidose (Jfit) Attachment Assembly
- Intellidose (Jfit) Dosing Assembly
- Lower Assembly
- Pads
- Squeegee Assembly - Series 01
- Squeegee Assembly - Series 02
- Squeegee Lift Assembly - Series 01 and 02
- Squeegee Lift Assembly - Series 03
- Upper Assembly
Manuals
- Electronics Board Layout_2020
- New Drive Unit_2020
- New Firmware v1.30_2020
- TASKI swingo 450/750/755/855/1250/1255 Electronics Overview
- TASKI swingo 755B/855B/1255B Power User Manual
- TASKI swingo 855B Power Technical Manual
Bulletins
- Charger_2020
- Implementation of Soldered Cable_2021
- Magnetic Valve
- New Charger Set_2019
- New Firmware v1.31_2020
- Optional Squeegee Rubber Blades 2019
- TASKI - swingo 455B, 755B, 855B, 1255B, 1650, 1850B and 2100 - Solenoid Update 2018
- TASKI swingo 750B/755B/855B/1250B/1255B/1650B/2500/3500/4000/5000 JFit Installation
- TASKI swingo 755/855 Wet Battery Conversion Guide
- TASKI swingo 755/855/1255 New Jumper Position
- TASKI swingo 755B Power/855B/1255B Service Light Reset
- Taski Swingo 855B New Charger Set
- TASKI swingo TSS Bulletin - How the Key Switch Works
- TASKI TSS Bulletin - Rating Plate Breakdown
Videos
- TASKI Power/Control Board Testing Video
- TASKI swingo 455B/755B/855B/1255B/1650/1850 Walk-Behind Install Video
- TASKI swingo 755/855 Incorrect Solution Flow Video
- TASKI swingo 755/855 Poor Or No Pick Video
- TASKI swingo 755/855 Service Introduction Video
- TASKI swingo 755B/855B Belt Upgrade Install Video
Repair Guides
- Check Brush Belt for Damage
- Check Brush Belt Tension
- Check Brush for Damage
- Check Brush Pulley for Locked Up Condition
- Check for Power to the Motor
- Check Linkage for Functionality
- Check Motor Belt for Damage
- Check Motor for Locked Up Condition
- Check the Belt Tensioner
- Check the Brush Pulley
- Check the Linkage for Damage
- Replace Brush
- Replace Damaged Linkage
- Replace the Belt Tensioner
- Replace the Brush Belt
- Replace the Brush Pulley
- Replace the Linkage
- Replace the Handle Mechanics
- Check Battery Cables
- Check Solenoid Wiring
- Check Solution Pump Wiring
- Check the brush micro switch
- Check the Charger Plug
- Check the Drive Board Voltage for the Primary Components
- Check the drive motor
- Check the FWD/REV switch assembly
- Check Vacuum Motor Wiring
- Replace Control Panel
- Replace Drive Board
- Replace Solenoid Wiring
- Replace the Batteries
- Replace the Battery Cables
- Replace the brush micro switch
- Replace the Communication Cable
- Replace the FWD/REV switch assembly
- Replace the Key Switch
- Replace the Power Plug
- Replace the Solenoid Valve
- Replace the Vacuum Motor Wiring
- Test the Key Switch
- Check Casters
- Check the Wheels
- Replace the Casters
- Replace the Wheels
- Check Casters
- Check Drain Hose for Damage
- Check Filter Screen
- Check for Power to the Motor
- Check for Stuck Float
- Check Recovery Tank Lid Seal
- Check Squeegee Blade for Damage
- Check the Squeegee Bracket
- Check the Squeegee Linkage
- Check To Make Sure Tank Cover Seals When Closed
- Check Vacuum Hose Condition
- Check Vacuum Hose Connection
- Check Vacuum Hose for Clogs
- Check Vacuum Motor
- Replace Casters
- Replace Float
- Replace the Drain Hose
- Replace the Filter Screen
- Replace the Recovery Tank Lid Seal
- Replace the Squeegee Blades - Series 1
- Replace the Vacuum Hose
- Replace the Vacuum Motor
- Check computer requirements.
- Check if correct USB is being used.
- Check if current Service Tool has been downloaded to Desktop.
- Check that default drivers are not being used.
- Check that machine is on.
- Check that Service Tool has reconnected after firmware download.
- Check that the appropriate firmware has been selected.
- Check that the Service Tool and machine are still connected.
- Check tool requirements.
- Click the download start button.
- Connect Service Tool to appropriate machine.
- Make sure connection is not lost during download process.
- Select the correct driver.
- USB cable needs to connect machine to computer.
- Add Water/Solution to Tank
- Check for power to the solenoid valve
- Check for Power to the Solution Pump
- Check the filter housing for leaks
- Check the solenoid valve for flow
- Check the tank for leaks
- Clean and Replace the Solution Filter
- Replace the solenoid valve
- Replace the Solution Pump
- Replacing the hose between the solution solenoid valve and deck
- Replacing the tank
Docs
- TASKI - swingo 350B/E, 455B, 755B, 855B, 1255B, 1650B, 1850B - Warranty
- TASKI Floor Pad Matrix
- Taski Service Tool and Firmware 8.30
- TASKI swingo 350B&E, 455B,755B,855B,1255B,1650B,1850B Limited Warranty as of November 2014
- TASKI swingo 755/855 Dashboard Comparison
- TASKI swingo 755B and 855B - Maintenance Schedule
- TASKI SWINGO 855B WALL CHART