Cleaning path: 27 inch (68.5 cm)
Pad speed: 2000 RPM
Motor: 4.5 HP
Tank (required): 20 lb (9.07 kg)
Sound level (operators ear): 88 dBA
Product length: 51.5 inch (131 cm)
Product width: 30 inch (76 cm)
Product height: 40 inch (101 cm)
Product weight: 220 lb (100 kg)
Nilfisk-Advance WHIRLAMATIC PRO 27K Parts and Support
the nilfisk-advance whirlamatic pro 27k is a propane powered floor buffer. this unit has a flexible pad driver that accommodates any surface and the most uneven floors get a smooth finish. the nilfisk-advance whirlamatic pro 27k has an ergonomic adjustable handle giving the operator a better comfort level allowing for less fatigue and longer use of the unit.
cleaning path: 27 inch (68.5 cm)
pad speed: 2000 rpm
motor: 4.5 hp
tank (required): 20 lb (9.07 kg)
sound level (operators ear): 88 dba
product length: 51.5 inch (131 cm)
product width: 30 inch (76 cm)
product height: 40 inch (101 cm)
product weight: 220 lb (100 kg)
cleaning path: 27 inch (68.5 cm)
pad speed: 2000 rpm
motor: 4.5 hp
tank (required): 20 lb (9.07 kg)
sound level (operators ear): 88 dba
product length: 51.5 inch (131 cm)
product width: 30 inch (76 cm)
product height: 40 inch (101 cm)
product weight: 220 lb (100 kg)
Parts
Can't find what you need? Click here or call 1-800-USA-CLEAN
In the market for a new machine? You can find quality new and reconditioned floor care equipment at one of our vendor partners:
Need a professional? We offer service both virtually and in person.
Learn more
Diagrams
- View all diagrams
- - Kawasaki - Muffler - Dust Bonnet - Emission System
- - Pad Holders
- -Engine- Honda - GXV340 and GXV390
- -Engine- Kawasaki FH381V
- -Engine- Kawasaki FH500V/FH541V
- -Engine- Kawasaki FS481V
- -Engine- Onan Elite
- -Engine- Onan Performer
- Frame Assembly
- Fuel System Overview
- NON-OEM Dust Bonnet and Cage Option
- Pads
- Typical Kawasaki and Honda Fuel Parts
Manuals
Bulletins
- TSS Bulletin #38 - Propane Buffer Battery Guide
- TSS Bulletin #39 - Checking the battery and charging system on a propane buffer with Kawasaki
- TSS Bulletin #40 - Frosting of a Fuel Regulator on a Propane Buffer
- TSS Bulletin #41 - Adjusting the Oil Pressure Switch on a Kawasaki FS481V
Repair Guides
- Check All Wiring
- Check Wiring Harness
- Replace Battery
- Replace Battery Cable
- Replace Defective Wiring
- Replace Solenoid
- Replace Starter
- Replace Stator
- Replace the Key Switch
- Replace the Voltage Regulator
- Replace Wiring Harness
- Test Voltage Regulator
- Test Battery Voltage & Do a Load Test
- Test Key Switch
- Test Solenoid
- CHECK AIR BREATHER FILTERS
- Check Compression
- Check Muffler
- Check Oxygen Sensor
- Fill Oil to Proper Level
- Pull Heads and Check Valve Seats
- Replace Air Breather Filters
- Replace Heads
- Replace Muffler
- Replace Oil Pressure Switch
- Replace Oxygen Sensor
- Set Valves and Recheck Compression
- Test Oil Pressure Switch
- Check Fuel Lines
- Open Tank Valve
- Replace Fuel Lines
- Replace Fuel Regulator
- Replace Tank
- Replace the Lock Off
- Test Regulator
- Test Tank Valve
- Test the Lock Off
- Tighten Fuel Connector
- Check Spark Plug Wires
- Check Spark Plugs
- Replace Ignition Module
- Replace Kill Switch Wire Harness
- Replace Spark Plugs
- Test Ignition Module
- Test Kill Switch Wire Harness