AQUAPLUS

AQUAPLUS

Nilfisk-Advance AQUAPLUS

Looking for equipment like this?

Contact our Experts!
AquaPLUS™ and AquaPLUS™ AXP™ battery-powered carpet extractors are a cleaner, greener solution that have received the CRI Seal of Approval for meeting the industry’s highest cleaning and carpet preservation standards.

Benefits of AquaPLUS Commercial Carpet Extractors
With our patented LIFT™ Technology and the optional AXP™ Onboard Detergent Dispensing System, AquaPLUS extractors are the greenest carpet extractors in the industry. With the CRI Seal of Approval in both LIFT and deep cleaning restoration modes, you can be confident that your carpets will be truly clean and ready to use in no time.
-Control solution flow and choose the perfect solution for your floor with our patented AXP Onboard Detergent Dispensing System (available on AXP models)
-Provide superior cleaning, increase productivity per tank and reduce water consumption with our patented LIFT Low Moisture Technology
-Clean heavily soiled areas with our Deep Treat™ prespray mode, which applies and agitates detergent on the carpet surface (available on AXP models)
-Improve air quality and reduce the risk of mold and allergens thanks to the fast 30 minute carpet dry time
-Work during the day or in noise-sensitive areas thanks to the low 69 dB A sound levels (meets LEED-EB’s IEQ guidelines for quiet operation)

Solution Capacity: 20 gal (76 L)
Solution Pump: 100 psi diaphragm demand
Restoration Mode Flow Rate: 0.81 gpm (3.1 L/min)
LIFT ™ Mode Flow Rate: 0.26 gpm (1 L/min)
Deep Treat™ Pre-Spray Mode Flow Rate: 0.92 gpm (3.5 L/min)
Recovery Capacity: 16 gal (61 L)
Vacuum Motor: Dual 3 stage bypass
Airflow: 93 cfm (44 L/sec)
Waterlift: 70 in H2O (17.4 km/hr)
Vacuum Shoes: Dual 13.5 in (34 cm) Dual pivoting laminar flow 45 lb down pressure
Brushes: Dual 24 in (61 cm) Dual counter rotating with debris hopper
Brush Motors: Dual 1/2 horsepower permanent magnet
Brush Speed: 950 RPM
Sound Level: 69 dB A
Electrical System: 24 V (4) X 6 V batteries
Batteries: 250 Ah wet-acid (optional 255 Ah AGM)
Transport Speed: 220 ft/min (4 km/hr)
LIFT ™ Mode Speed: 90 ft/min (1.6 km/hr)
Restoration Mode Speed: 50 ft/min (0.9 km/hr)
Light Deep Treat™ Mode Speed: 150 ft/min (2.7 km/hr)
Heavy Deep Treat™ Mode Speed: 100 ft/min (1.8 km/hr)
Coverage Rate: 10,800 ft2/hour (LIFT™ Mode)
6,000 ft2/hour (Restoration Mode)
CRI Approval: Bronze for Deep Cleaning Extractors in both Restoration Mode and LIFT ™ Mode
Machine Dimensions: L = 56 in x W = 27 in x H = 43.5 in
(L = 142 cm x W = 69 cm x H = 110 cm)
Machine Weight: 650 lb (295 kg) with batteries / 370 lb (168 kg) without batteries
Shipping Weight: 680 lb (308 kg)

AQUAPLUS

Looking for equipment like this?

Contact our Experts
AquaPLUS™ and AquaPLUS™ AXP™ battery-powered carpet extractors are a cleaner, greener solution that have received the CRI Seal of Approval for meeting the industry’s highest cleaning and carpet preservation standards.

Benefits of AquaPLUS Commercial Carpet Extractors
With our patented LIFT™ Technology and the optional AXP™ Onboard Detergent Dispensing System, AquaPLUS extractors are the greenest carpet extractors in the industry. With the CRI Seal of Approval in both LIFT and deep cleaning restoration modes, you can be confident that your carpets will be truly clean and ready to use in no time.
-Control solution flow and choose the perfect solution for your floor with our patented AXP Onboard Detergent Dispensing System (available on AXP models)
-Provide superior cleaning, increase productivity per tank and reduce water consumption with our patented LIFT Low Moisture Technology
-Clean heavily soiled areas with our Deep Treat™ prespray mode, which applies and agitates detergent on the carpet surface (available on AXP models)
-Improve air quality and reduce the risk of mold and allergens thanks to the fast 30 minute carpet dry time
-Work during the day or in noise-sensitive areas thanks to the low 69 dB A sound levels (meets LEED-EB’s IEQ guidelines for quiet operation)

Solution Capacity: 20 gal (76 L)
Solution Pump: 100 psi diaphragm demand
Restoration Mode Flow Rate: 0.81 gpm (3.1 L/min)
LIFT ™ Mode Flow Rate: 0.26 gpm (1 L/min)
Deep Treat™ Pre-Spray Mode Flow Rate: 0.92 gpm (3.5 L/min)
Recovery Capacity: 16 gal (61 L)
Vacuum Motor: Dual 3 stage bypass
Airflow: 93 cfm (44 L/sec)
Waterlift: 70 in H2O (17.4 km/hr)
Vacuum Shoes: Dual 13.5 in (34 cm) Dual pivoting laminar flow 45 lb down pressure
Brushes: Dual 24 in (61 cm) Dual counter rotating with debris hopper
Brush Motors: Dual 1/2 horsepower permanent magnet
Brush Speed: 950 RPM
Sound Level: 69 dB A
Electrical System: 24 V (4) X 6 V batteries
Batteries: 250 Ah wet-acid (optional 255 Ah AGM)
Transport Speed: 220 ft/min (4 km/hr)
LIFT ™ Mode Speed: 90 ft/min (1.6 km/hr)
Restoration Mode Speed: 50 ft/min (0.9 km/hr)
Light Deep Treat™ Mode Speed: 150 ft/min (2.7 km/hr)
Heavy Deep Treat™ Mode Speed: 100 ft/min (1.8 km/hr)
Coverage Rate: 10,800 ft2/hour (LIFT™ Mode)
6,000 ft2/hour (Restoration Mode)
CRI Approval: Bronze for Deep Cleaning Extractors in both Restoration Mode and LIFT ™ Mode
Machine Dimensions: L = 56 in x W = 27 in x H = 43.5 in
(L = 142 cm x W = 69 cm x H = 110 cm)
Machine Weight: 650 lb (295 kg) with batteries / 370 lb (168 kg) without batteries
Shipping Weight: 680 lb (308 kg)

Nilfisk-Advance AQUAPLUS Parts and Support

aquaplus™ and aquaplus™ axp™ battery-powered carpet extractors are a cleaner, greener solution that have received the cri seal of approval for meeting the industry’s highest cleaning and carpet preservation standards.

benefits of aquaplus commercial carpet extractors
with our patented lift™ technology and the optional axp™ onboard detergent dispensing system, aquaplus extractors are the greenest carpet extractors in the industry. with the cri seal of approval in both lift and deep cleaning restoration modes, you can be confident that your carpets will be truly clean and ready to use in no time.
-control solution flow and choose the perfect solution for your floor with our patented axp onboard detergent dispensing system (available on axp models)
-provide superior cleaning, increase productivity per tank and reduce water consumption with our patented lift low moisture technology
-clean heavily soiled areas with our deep treat™ prespray mode, which applies and agitates detergent on the carpet surface (available on axp models)
-improve air quality and reduce the risk of mold and allergens thanks to the fast 30 minute carpet dry time
-work during the day or in noise-sensitive areas thanks to the low 69 db a sound levels (meets leed-eb’s ieq guidelines for quiet operation)

solution capacity: 20 gal (76 l)
solution pump: 100 psi diaphragm demand
restoration mode flow rate: 0.81 gpm (3.1 l/min)
lift ™ mode flow rate: 0.26 gpm (1 l/min)
deep treat™ pre-spray mode flow rate: 0.92 gpm (3.5 l/min)
recovery capacity: 16 gal (61 l)
vacuum motor: dual 3 stage bypass
airflow: 93 cfm (44 l/sec)
waterlift: 70 in h2o (17.4 km/hr)
vacuum shoes: dual 13.5 in (34 cm) dual pivoting laminar flow 45 lb down pressure
brushes: dual 24 in (61 cm) dual counter rotating with debris hopper
brush motors: dual 1/2 horsepower permanent magnet
brush speed: 950 rpm
sound level: 69 db a
electrical system: 24 v (4) x 6 v batteries
batteries: 250 ah wet-acid (optional 255 ah agm)
transport speed: 220 ft/min (4 km/hr)
lift ™ mode speed: 90 ft/min (1.6 km/hr)
restoration mode speed: 50 ft/min (0.9 km/hr)
light deep treat™ mode speed: 150 ft/min (2.7 km/hr)
heavy deep treat™ mode speed: 100 ft/min (1.8 km/hr)
coverage rate: 10,800 ft2/hour (lift™ mode)
6,000 ft2/hour (restoration mode)
cri approval: bronze for deep cleaning extractors in both restoration mode and lift ™ mode
machine dimensions: l = 56 in x w = 27 in x h = 43.5 in
(l = 142 cm x w = 69 cm x h = 110 cm)
machine weight: 650 lb (295 kg) with batteries / 370 lb (168 kg) without batteries
shipping weight: 680 lb (308 kg)

Parts

  • Product
  • Qty in Cart
  • Quantity
  • Price
  • Subtotal
  • OEM
    315124 - 24V onboard battery charger 272-2358

    24V onboard battery charger 272-2358

    $1,117.17
    Specifications:Type: OnboardMatches:164-913924-9-12712491271272-729731512431577340844A40844B563151245631577388045360Commonly purchased together:May fit on these models - select model and diagram to confirmNilfisk-Advance CONVERTAMATIC...
    $1,117.17
    Qty in Cart: 0
    Price:
    $1,117.17
    Subtotal:
  • ships same day
    OEM
    317157 - Drive end assembly 272-9336

    Drive end assembly 272-9336

    $283.73
    Specifications:Length: 4 in Width: 4.5 in Height: 4.5 in Matches:3171575631715788037610Commonly purchased together:May fit on these models - select model and diagram to confirmNilfisk-Advance AQUAPLUSNilfisk-Advance ES4000Nilfisk-Advance...
    $283.73
    Qty in Cart: 0
    Price:
    $283.73
    Subtotal:
  • ships same day
    Non-OEM
     - 120V 100 PSI Flo Jet pump 991-8009

    120V 100 PSI Flo Jet pump 991-8009

    $242.54
    Specifications:Weight: 4.6 poundsMatches:2130-5179.106-420.0M-43Alternative items:Below are other options that may meet your needs.(k) PUMP, 115v(Fan Cooled) (QBA) 100PSI$240.30993-2293Commonly purchased together:May fit on these models - select model...
    $242.54
    Qty in Cart: 0
    Price:
    $242.54
    Subtotal:
  • Non-OEM
     - 12 inch aluminum head wand, 2 jet, 120 PSI plastic valve 991-8001

    12 inch aluminum head wand, 2 jet, 120 PSI (OBSOLETE) 991-8001

    Call for availability
    Ordering this item for a Nilfisk-Advance Aquaclean FLX or XP? If so please order 991-8158.Specifications:Weight: 6.02 poundsMaterial: PlasticType: WandNumber of Wand Bends: 1Number of Pieces Included: 1Length: 12Number of Spray Jets: 2Matches:W15302 ...
    $278.64
    Qty in Cart: 0
    Price:
    $278.64
    Subtotal:
  • OEM
    040958 - CRI tag 272-9325

    CRI tag 272-9325

    $10.90
    Matches:04095856040958Commonly purchased together:Fits on:Nilfisk-Advance AQUACLEAN 18FLXNilfisk-Advance AQUACLEAN XPNilfisk-Advance AQUAPLUSNilfisk-Advance AQUACLEAN 16STClarke (Alto) CLEAN TRACK L18Kent (Nilfisk-Advance) KLENZOR 18Clarke (Alto) CLEAN...
    $10.90
    Qty in Cart: 0
    Price:
    $10.90
    Subtotal:
  • ships same day
    OEM
    380503 - 24V transaxle hub kit 272-9300

    24V transaxle hub kit 272-9300

    $102.72
    Matches:202-13663805035638050388050660Commonly purchased together:May fit on these models - select model and diagram to confirmNilfisk-Advance CONVERTAMATIC 26D-CNilfisk-Advance AQUAPLUSNilfisk-Advance CONVERTAMATIC X26D-CNilfisk-Advance CONVERTAMATIC...
    $102.72
    Qty in Cart: 0
    Price:
    $102.72
    Subtotal:
  • ships same day
    OEM
    56316053 - Belt 272-8576

    Belt 272-8576

    $31.83
    Specifications:Weight: 0.2 poundsMatches:3160535631605386788290Commonly purchased together:Fits on:Nilfisk-Advance AQUAPLUSNilfisk-Advance ES4000Nilfisk-Advance ADPHIBIANClarke (Alto) CLEAN TRACK L24Nilfisk-Advance ADHANCER 32CNilfisk-Advance ADHANCER
    $31.83
    Qty in Cart: 0
    Price:
    $31.83
    Subtotal:
  • OEM
    56317045 - 24V pump 272-8540

    24V pump 272-8540

    $372.81
    Matches:3170455631704588072880Commonly purchased together:May fit on these models - select model and diagram to confirmNilfisk-Advance AQUAPLUSNilfisk-Advance ES4000Nilfisk-Advance ADPHIBIANClarke (Alto) CLEAN TRACK L24
    $372.81
    Qty in Cart: 0
    Price:
    $372.81
    Subtotal:
  • Total: items /

Adding your products to cart

Can't find what you need? Click here or call 1-800-USA-CLEAN
In the market for a new machine? You can find quality new and reconditioned floor care equipment at one of our vendor partners:
best live chat