The AdSpray 1000XPC is a cart-mounted model with adjustable pressure to 1,000 psu (69 bar) for various applications.
The spray gun has trigger on/off spray control, and is at the end of a 40 foot (12 m) long hose. Nozzle tip turns to vary the spray pattern from zero to sixty degree. A high/low pressure nozzle control switches between low pressure chemical applications (to save on costly chemicals) and high pressure rinse.
The AdSpray 1000XPC with its 1.5 horsepower, 115 volt motor provides ample power to a 2.2 gpm (8.3 l/min) pump. An inlet water filter traps contaminants to protect pump from premature wear, and chemicals are injected at variable rates, "after the pump" for additional protection. This machine handles water up to 140°F (60° C). Ceramic plunger, forged crankshaft, stainless steel valves and other features assure durable pump performance. In fact, the pump has a five-year warranty.
The AdSpray has a 1.5 hp, 115 volt motor which provides ample power to a 2.2 gpm (8.3 L/min) pump. An electrical thermal valve with on/off indicator light, protects the pump by shutting the unit off if it is left on by mistake. The pump can handle water up to 180° F (82° C), and has a one-year warranty.
Cord and hose storage is built into the roto-molded high-density polypropylene handle. This unique handle/frame design is also a six gallon (22 L) solution tank.
The AdSpray 1000XPC offers cleaning power, portability and economy, with a variety of accessories to meet your cleaning needs.
Motor/Engine 1.5 horsepower, 115 V / 15 amp / 60 Hz
Power Cord 35 ft (10 m) long, with ground fault interrupter
Pump Teflon graphite seals, ceramic coated steel pistons, stainless steel valves, ceramic plunger, and by-pass running against closed gun. Pump is built to handle 140° F (60° C) water temperatures, and has a 5 year warranty.
Output Adjustable to 1,000 psi (69 bar) at - 2.2 gpm (8.3 L/min)
Chemical Injection Variable rate, after the pump
Hose 40 ft (12 m), non-marking, high-pressure
Gun Two-piece 36 in (91 cm) with 0-60° adjustable spray nozzle with high/low pressure switch, trigger on/off spray control and plastic insulation
Construction ABS plastic motor/pump housing, frame and handle of high-density rotational molded polyethylene.
Dimensions
Height 45 in (114 cm)
Width 15 in (38 cm)
Length 25 in (64 cm)
Weight Net 105 lb (48 kg) / Shipping 110 lb (50 kg)
Nilfisk-Advance ADSPRAY 1000XPC Parts and Support
the adspray 1000xpc pressure washer blasts away dirt and grime for fast and efficient cleaning. fast because it power cleans.... efficient because the chemical reaches areas you can't. the chemical is sprayed on with low pressure, the dirt is blasted off with high-pressure power.
the adspray 1000xpc is a cart-mounted model with adjustable pressure to 1,000 psu (69 bar) for various applications.
the spray gun has trigger on/off spray control, and is at the end of a 40 foot (12 m) long hose. nozzle tip turns to vary the spray pattern from zero to sixty degree. a high/low pressure nozzle control switches between low pressure chemical applications (to save on costly chemicals) and high pressure rinse.
the adspray 1000xpc with its 1.5 horsepower, 115 volt motor provides ample power to a 2.2 gpm (8.3 l/min) pump. an inlet water filter traps contaminants to protect pump from premature wear, and chemicals are injected at variable rates, "after the pump" for additional protection. this machine handles water up to 140°f (60° c). ceramic plunger, forged crankshaft, stainless steel valves and other features assure durable pump performance. in fact, the pump has a five-year warranty.
the adspray has a 1.5 hp, 115 volt motor which provides ample power to a 2.2 gpm (8.3 l/min) pump. an electrical thermal valve with on/off indicator light, protects the pump by shutting the unit off if it is left on by mistake. the pump can handle water up to 180° f (82° c), and has a one-year warranty.
cord and hose storage is built into the roto-molded high-density polypropylene handle. this unique handle/frame design is also a six gallon (22 l) solution tank.
the adspray 1000xpc offers cleaning power, portability and economy, with a variety of accessories to meet your cleaning needs.
motor/engine 1.5 horsepower, 115 v / 15 amp / 60 hz
power cord 35 ft (10 m) long, with ground fault interrupter
pump teflon graphite seals, ceramic coated steel pistons, stainless steel valves, ceramic plunger, and by-pass running against closed gun. pump is built to handle 140° f (60° c) water temperatures, and has a 5 year warranty.
output adjustable to 1,000 psi (69 bar) at - 2.2 gpm (8.3 l/min)
chemical injection variable rate, after the pump
hose 40 ft (12 m), non-marking, high-pressure
gun two-piece 36 in (91 cm) with 0-60° adjustable spray nozzle with high/low pressure switch, trigger on/off spray control and plastic insulation
construction abs plastic motor/pump housing, frame and handle of high-density rotational molded polyethylene.
dimensions
height 45 in (114 cm)
width 15 in (38 cm)
length 25 in (64 cm)
weight net 105 lb (48 kg) / shipping 110 lb (50 kg)
the adspray 1000xpc is a cart-mounted model with adjustable pressure to 1,000 psu (69 bar) for various applications.
the spray gun has trigger on/off spray control, and is at the end of a 40 foot (12 m) long hose. nozzle tip turns to vary the spray pattern from zero to sixty degree. a high/low pressure nozzle control switches between low pressure chemical applications (to save on costly chemicals) and high pressure rinse.
the adspray 1000xpc with its 1.5 horsepower, 115 volt motor provides ample power to a 2.2 gpm (8.3 l/min) pump. an inlet water filter traps contaminants to protect pump from premature wear, and chemicals are injected at variable rates, "after the pump" for additional protection. this machine handles water up to 140°f (60° c). ceramic plunger, forged crankshaft, stainless steel valves and other features assure durable pump performance. in fact, the pump has a five-year warranty.
the adspray has a 1.5 hp, 115 volt motor which provides ample power to a 2.2 gpm (8.3 l/min) pump. an electrical thermal valve with on/off indicator light, protects the pump by shutting the unit off if it is left on by mistake. the pump can handle water up to 180° f (82° c), and has a one-year warranty.
cord and hose storage is built into the roto-molded high-density polypropylene handle. this unique handle/frame design is also a six gallon (22 l) solution tank.
the adspray 1000xpc offers cleaning power, portability and economy, with a variety of accessories to meet your cleaning needs.
motor/engine 1.5 horsepower, 115 v / 15 amp / 60 hz
power cord 35 ft (10 m) long, with ground fault interrupter
pump teflon graphite seals, ceramic coated steel pistons, stainless steel valves, ceramic plunger, and by-pass running against closed gun. pump is built to handle 140° f (60° c) water temperatures, and has a 5 year warranty.
output adjustable to 1,000 psi (69 bar) at - 2.2 gpm (8.3 l/min)
chemical injection variable rate, after the pump
hose 40 ft (12 m), non-marking, high-pressure
gun two-piece 36 in (91 cm) with 0-60° adjustable spray nozzle with high/low pressure switch, trigger on/off spray control and plastic insulation
construction abs plastic motor/pump housing, frame and handle of high-density rotational molded polyethylene.
dimensions
height 45 in (114 cm)
width 15 in (38 cm)
length 25 in (64 cm)
weight net 105 lb (48 kg) / shipping 110 lb (50 kg)
Parts
Can't find what you need? Click here or call 1-800-USA-CLEAN
In the market for a new machine? You can find quality new and reconditioned floor care equipment at one of our vendor partners:
Need a professional? We offer service both virtually and in person.
Learn more
