CLEAN TRACK S16

CLEAN TRACK S16

Clarke (Alto) CLEAN TRACK S16

Looking for equipment like this?

Contact our Experts!
Flexible Design
Get cleaner carpets and enhance facility appearance with the Clarke Clean Track® S16 and L18 self-contained portable extractors. A compact, easily-maneuverable design, combined with a 16 or 18 inch cleaning path, allows you to tackle cleaning challenges ranging from (commercial) office spaces, libraries, and hotel rooms, just to name a few. An optional hard floor kit extends the Clean Track’s application flexibility, quickly converting it to a hard surface cleaner for tiled and grouted floors. With simple tank filling, tools-free brush and vacuum shoe removal and intuitive controls, Clean Track extractors provide an unprecedented easy-to-use cleaning solution.

Deep Cleaning with Minimal Dry Time
The Clean Track extractors ensure increased productivity with industry-leading performance capabilities. Single deflector spray jet technology provides even, consistent water and chemical coverage across the cleaning path, while an aero-dynamically designed vacuum shoe removes excess water for faster carpet drying times. By eliminating unwanted solution streaks and minimizing drying time, Clean Track allows quicker room turnover and occupancy. Laminar flow technology reduces turbulence and increases water pick-up, ensuring your carpets are left with a cleaner, dryer and more appealing finish.

Enhanced Productivity
Equipped with a larger tank capacity, wider cleaning path and Multi-Position Flip Handle, the Clean Track L18 delivers superior productivity with dual method cleaning. Position the adjustable handle in pull-back mode for edge or detailed extraction in small areas. Then, in an instant, flip the handle over to the front of the machine to convert the L18 into a walk-behind extractor to easily extract hallways and large carpeted areas, increasing cleaning productivity.

Cleaning Path: 16 in (40.6 cm)
Solution Tank: 7 gal (26.5 L)
Recovery Tank: 5 gal (19 L)
Pump: 60 psi
Flow Rate: 0.7 gpm
Vacuum Motor: 1.5 hp, 3 stage
Water Lift: 117 in (297 cm)
Brush Motor: 1/3 hp
Brush Size: 16 in (40.6 cm)
Vacuum Shoe Size: 18 in (45.7 cm)
Power Cable: 50 ft (15 m)
Min Machine Length: 29.5 in (79 cm)
Machine Width: 20 in (51 cm)
Tank Height: 29.5 in (75 cm)
Net Weight: 92 lb (41.73 kg)
Shipping Weight: 118 lb (53.52 kg)

CLEAN TRACK S16

Looking for equipment like this?

Contact our Experts
Flexible Design
Get cleaner carpets and enhance facility appearance with the Clarke Clean Track® S16 and L18 self-contained portable extractors. A compact, easily-maneuverable design, combined with a 16 or 18 inch cleaning path, allows you to tackle cleaning challenges ranging from (commercial) office spaces, libraries, and hotel rooms, just to name a few. An optional hard floor kit extends the Clean Track’s application flexibility, quickly converting it to a hard surface cleaner for tiled and grouted floors. With simple tank filling, tools-free brush and vacuum shoe removal and intuitive controls, Clean Track extractors provide an unprecedented easy-to-use cleaning solution.

Deep Cleaning with Minimal Dry Time
The Clean Track extractors ensure increased productivity with industry-leading performance capabilities. Single deflector spray jet technology provides even, consistent water and chemical coverage across the cleaning path, while an aero-dynamically designed vacuum shoe removes excess water for faster carpet drying times. By eliminating unwanted solution streaks and minimizing drying time, Clean Track allows quicker room turnover and occupancy. Laminar flow technology reduces turbulence and increases water pick-up, ensuring your carpets are left with a cleaner, dryer and more appealing finish.

Enhanced Productivity
Equipped with a larger tank capacity, wider cleaning path and Multi-Position Flip Handle, the Clean Track L18 delivers superior productivity with dual method cleaning. Position the adjustable handle in pull-back mode for edge or detailed extraction in small areas. Then, in an instant, flip the handle over to the front of the machine to convert the L18 into a walk-behind extractor to easily extract hallways and large carpeted areas, increasing cleaning productivity.

Cleaning Path: 16 in (40.6 cm)
Solution Tank: 7 gal (26.5 L)
Recovery Tank: 5 gal (19 L)
Pump: 60 psi
Flow Rate: 0.7 gpm
Vacuum Motor: 1.5 hp, 3 stage
Water Lift: 117 in (297 cm)
Brush Motor: 1/3 hp
Brush Size: 16 in (40.6 cm)
Vacuum Shoe Size: 18 in (45.7 cm)
Power Cable: 50 ft (15 m)
Min Machine Length: 29.5 in (79 cm)
Machine Width: 20 in (51 cm)
Tank Height: 29.5 in (75 cm)
Net Weight: 92 lb (41.73 kg)
Shipping Weight: 118 lb (53.52 kg)

Clarke (Alto) CLEAN TRACK S16 Parts and Support

flexible design
get cleaner carpets and enhance facility appearance with the clarke clean track® s16 and l18 self-contained portable extractors. a compact, easily-maneuverable design, combined with a 16 or 18 inch cleaning path, allows you to tackle cleaning challenges ranging from (commercial) office spaces, libraries, and hotel rooms, just to name a few. an optional hard floor kit extends the clean track’s application flexibility, quickly converting it to a hard surface cleaner for tiled and grouted floors. with simple tank filling, tools-free brush and vacuum shoe removal and intuitive controls, clean track extractors provide an unprecedented easy-to-use cleaning solution.

deep cleaning with minimal dry time
the clean track extractors ensure increased productivity with industry-leading performance capabilities. single deflector spray jet technology provides even, consistent water and chemical coverage across the cleaning path, while an aero-dynamically designed vacuum shoe removes excess water for faster carpet drying times. by eliminating unwanted solution streaks and minimizing drying time, clean track allows quicker room turnover and occupancy. laminar flow technology reduces turbulence and increases water pick-up, ensuring your carpets are left with a cleaner, dryer and more appealing finish.

enhanced productivity
equipped with a larger tank capacity, wider cleaning path and multi-position flip handle, the clean track l18 delivers superior productivity with dual method cleaning. position the adjustable handle in pull-back mode for edge or detailed extraction in small areas. then, in an instant, flip the handle over to the front of the machine to convert the l18 into a walk-behind extractor to easily extract hallways and large carpeted areas, increasing cleaning productivity.

cleaning path: 16 in (40.6 cm)
solution tank: 7 gal (26.5 l)
recovery tank: 5 gal (19 l)
pump: 60 psi
flow rate: 0.7 gpm
vacuum motor: 1.5 hp, 3 stage
water lift: 117 in (297 cm)
brush motor: 1/3 hp
brush size: 16 in (40.6 cm)
vacuum shoe size: 18 in (45.7 cm)
power cable: 50 ft (15 m)
min machine length: 29.5 in (79 cm)
machine width: 20 in (51 cm)
tank height: 29.5 in (75 cm)
net weight: 92 lb (41.73 kg)
shipping weight: 118 lb (53.52 kg)

Parts

  • Product
  • Qty in Cart
  • Quantity
  • Price
  • Subtotal
  • OEM
    1047 - Knob (OBSOLETE) 272-5070

    Knob (OBSOLETE) 272-5070

    Call for availability
    Matches:104730216756302167May fit on these models - select model and diagram to confirmNilfisk-Advance REELCLEANERNilfisk-Advance AQUACLEAN XPNilfisk-Advance AQUACLEAN 16STNilfisk-Advance GW 4512Nilfisk-Advance GW 6016Nilfisk-Advance GW 4512ASClarke...
    $5.37
    Qty in Cart: 0
    Price:
    $5.37
    Subtotal:
  • OEM
    56109566 - 90 degree barbed elbow 172-4056

    90 degree barbed elbow 172-4056

    $10.56
    Specifications:Length: 1.5 in Width: 1.5 in Height: 1.5 in Weight: 0.006 poundsType: 90 degreeMaterial: PlasticSize of First Fitting End: .375 IN &emdash; MaleSize of Second Fitting End: .625 IN &emdash;...
    $10.56
    Qty in Cart: 0
    Price:
    $10.56
    Subtotal:
  • ships same day
    Non-OEM
     - 120V 100 PSI Flo Jet pump 991-8009

    120V 100 PSI Flo Jet pump 991-8009

    $242.54
    Specifications:Weight: 4.6 poundsMatches:2130-5179.106-420.0M-43Alternative items:Below are other options that may meet your needs.(k) PUMP, 115v(Fan Cooled) (QBA) 100PSI$240.30993-2293Commonly purchased together:May fit on these models - select model...
    $242.54
    Qty in Cart: 0
    Price:
    $242.54
    Subtotal:
  • OEM
    56265065 - 18 inch brush - DOES NOT include bearing blocks 272-0526

    18 inch brush - DOES NOT include bearing blocks 272-0526

    $122.06
    Specifications:Size: 18Matches:2650655626506586781810Commonly purchased together:Fits on:Nilfisk-Advance AQUACLEAN 18FLXNilfisk-Advance AQUACLEAN XPNilfisk-Advance AQUACLEAN 16STClarke (Alto) EX40 18LXNilfisk-Advance ES300 XPClarke (Alto) CLEAN TRACK...
    $122.06
    Qty in Cart: 0
    Price:
    $122.06
    Subtotal:
  • Non-OEM
     - 12 inch aluminum head wand, 2 jet, 120 PSI plastic valve 991-8001

    12 inch aluminum head wand, 2 jet, 120 PSI (OBSOLETE) 991-8001

    Call for availability
    Ordering this item for a Nilfisk-Advance Aquaclean FLX or XP? If so please order 991-8158.Specifications:Weight: 6.02 poundsMaterial: PlasticType: WandNumber of Wand Bends: 1Number of Pieces Included: 1Length: 12Number of Spray Jets: 2Matches:W15302 ...
    $278.64
    Qty in Cart: 0
    Price:
    $278.64
    Subtotal:
  • OEM
    040958 - CRI tag 272-9325

    CRI tag 272-9325

    $10.90
    Matches:04095856040958Commonly purchased together:Fits on:Nilfisk-Advance AQUACLEAN 18FLXNilfisk-Advance AQUACLEAN XPNilfisk-Advance AQUAPLUSNilfisk-Advance AQUACLEAN 16STClarke (Alto) CLEAN TRACK L18Kent (Nilfisk-Advance) KLENZOR 18Clarke (Alto) CLEAN...
    $10.90
    Qty in Cart: 0
    Price:
    $10.90
    Subtotal:
  • OEM
    265208 - 1/8 inch quick connect female 272-0606

    1/8 inch quick connect female 272-0606

    $72.23
    Specifications:Weight: 0.15 poundsMatches:2652085626520888045400Commonly purchased together:Fits on:Nilfisk-Advance AQUACLEAN 18FLXNilfisk-Advance AQUACLEAN XPNilfisk-Advance AQUAPLUSNilfisk-Advance AQUACLEAN 16STClarke (Alto) CLEAN TRACK L18Kent...
    $72.23
    Qty in Cart: 0
    Price:
    $72.23
    Subtotal:
  • OEM
    109513 - Nozzle and valve assembly 272-0602

    Nozzle and valve assembly 272-0602

    $268.66
    Matches:109513265160561095135626516088059150Commonly purchased together:May fit on these models - select model and diagram to confirmNilfisk-Advance AQUACLEAN 18FLXNilfisk-Advance AQUACLEAN XPNilfisk-Advance AQUACLEAN 16STClarke (Alto) CLEAN TRACK...
    $268.66
    Qty in Cart: 0
    Price:
    $268.66
    Subtotal:
  • Total: items /

Adding your products to cart

Can't find what you need? Click here or call 1-800-USA-CLEAN
In the market for a new machine? You can find quality new and reconditioned floor care equipment at one of our vendor partners:
best live chat