LMX

LMX

VonSchrader Company LMX

With the LMX, we did what no one else could: design the ultimate low moisture soil extraction system. It's not only quieter, more rugged and faster, but more mobile and maneuverable. We claim the LMX to be the most technologically advanced system ever built for super fast cleaning, quick drying and deep down cleaning of carpet. We think you'll agree.

The LMX system applies low moisture cleaning solution with an exclusive full bristle brush, gently loosening soil. The emulsified soil is immediately extracted with a built0in vacuum. All in one forward pass, by one person. Not only are carpets deep cleaned faster but they are dry quicker than with any other system.

Another plus! Low moisture means no risk of carpet damage, shrinkage or mildewing caused by over wetting.

The LMX continues the evolution of a carpet cleaning phenomenon that has yet to be equalled.

The LMX meets all these certified testing standards.

Easy to operate
No special skill is needed to operate the system. Regular maintenance staff will do a professional job every time. JUST FILL THE TANK, PRESS TWO SWITCHES AND GO. Dirty in front, clean in back. System comes with easy-to-follow training video and manual. Bilingual instructions provided.

Lightweight, compact, portable
Outstanding unit weight/balance, speeds up the cleaning process, reducing operator fatigue. Performance and results are not sacrificed. Both the handle and tank are easily removed for space saving storage or transport.

Easy, fast system access
The hood is easily removed for ready access to the entire system. Adjustments or do-it-yourself parts replacements are done quickly with no specialized service tools. Down time and labor costs are minimized.

Dimensions Length 24" Width 17-1/2" Height 15-1/2" (less handle
and detergent tank). 36" floor to top of handle.
Shipping Weight 74 pounds.
Net Weight 57 pounds with handle. 46 pounds without handle.
Handle Detachable.
Solution Tank Capacity 5 gallons, hood mounted. Detachable.
Dirty Solution
Recovery Tank Capacity 3 gallons. Clear, “see-through”.
Power Supply 110-120 volt, 50-60 Hertz, 7.7 Amperes. 220 volt
available, 50-60 Hertz, 3.8 Amperes
Wattage 860 watts
Motor 3/4 HP @ 10,000 RPM (full load) with permanently
lubricated bearings.
Transmission Primary Drive Train - Helical gears permanently lubricated. Secondary Drive Train - Chain Drive
*Brush Construction Rigid vinyl core, with 1-1/8" tynex bristles secured by 3 layers of epoxy resin-impregnated heavy cord. Length - 13" Diameter - 4-3/4" *Stiff bristle brush available.
Controls 2 illuminated rocker type switches mounted on handle.
(color coded control panel.) Red - Motor and light control.
White - Controls detergent through electric solenoid valve.
Detergent Flow Control Adjustable flow output, slow to fast.
Defoaming Process Liquidator added directly into recovery tank de-foams for easy disposal.
Color Von Schrader gray hood and detergent tank. Clear
recovery tank. Steel Components - black epoxy painted for durability.
Power Supply Cord 50 foot, non-marring, 3-wire.
Drying Time From 1 hour to less than 2 hours, depending on environmental humidity and carpet pile depth and density.
Warranty 1 year warranty.

LMX
With the LMX, we did what no one else could: design the ultimate low moisture soil extraction system. It's not only quieter, more rugged and faster, but more mobile and maneuverable. We claim the LMX to be the most technologically advanced system ever built for super fast cleaning, quick drying and deep down cleaning of carpet. We think you'll agree.

The LMX system applies low moisture cleaning solution with an exclusive full bristle brush, gently loosening soil. The emulsified soil is immediately extracted with a built0in vacuum. All in one forward pass, by one person. Not only are carpets deep cleaned faster but they are dry quicker than with any other system.

Another plus! Low moisture means no risk of carpet damage, shrinkage or mildewing caused by over wetting.

The LMX continues the evolution of a carpet cleaning phenomenon that has yet to be equalled.

The LMX meets all these certified testing standards.

Easy to operate
No special skill is needed to operate the system. Regular maintenance staff will do a professional job every time. JUST FILL THE TANK, PRESS TWO SWITCHES AND GO. Dirty in front, clean in back. System comes with easy-to-follow training video and manual. Bilingual instructions provided.

Lightweight, compact, portable
Outstanding unit weight/balance, speeds up the cleaning process, reducing operator fatigue. Performance and results are not sacrificed. Both the handle and tank are easily removed for space saving storage or transport.

Easy, fast system access
The hood is easily removed for ready access to the entire system. Adjustments or do-it-yourself parts replacements are done quickly with no specialized service tools. Down time and labor costs are minimized.

Dimensions Length 24" Width 17-1/2" Height 15-1/2" (less handle
and detergent tank). 36" floor to top of handle.
Shipping Weight 74 pounds.
Net Weight 57 pounds with handle. 46 pounds without handle.
Handle Detachable.
Solution Tank Capacity 5 gallons, hood mounted. Detachable.
Dirty Solution
Recovery Tank Capacity 3 gallons. Clear, “see-through”.
Power Supply 110-120 volt, 50-60 Hertz, 7.7 Amperes. 220 volt
available, 50-60 Hertz, 3.8 Amperes
Wattage 860 watts
Motor 3/4 HP @ 10,000 RPM (full load) with permanently
lubricated bearings.
Transmission Primary Drive Train - Helical gears permanently lubricated. Secondary Drive Train - Chain Drive
*Brush Construction Rigid vinyl core, with 1-1/8" tynex bristles secured by 3 layers of epoxy resin-impregnated heavy cord. Length - 13" Diameter - 4-3/4" *Stiff bristle brush available.
Controls 2 illuminated rocker type switches mounted on handle.
(color coded control panel.) Red - Motor and light control.
White - Controls detergent through electric solenoid valve.
Detergent Flow Control Adjustable flow output, slow to fast.
Defoaming Process Liquidator added directly into recovery tank de-foams for easy disposal.
Color Von Schrader gray hood and detergent tank. Clear
recovery tank. Steel Components - black epoxy painted for durability.
Power Supply Cord 50 foot, non-marring, 3-wire.
Drying Time From 1 hour to less than 2 hours, depending on environmental humidity and carpet pile depth and density.
Warranty 1 year warranty.

VonSchrader Company LMX Parts and Support

with the lmx, we did what no one else could: design the ultimate low moisture soil extraction system. it's not only quieter, more rugged and faster, but more mobile and maneuverable. we claim the lmx to be the most technologically advanced system ever built for super fast cleaning, quick drying and deep down cleaning of carpet. we think you'll agree.

the lmx system applies low moisture cleaning solution with an exclusive full bristle brush, gently loosening soil. the emulsified soil is immediately extracted with a built0in vacuum. all in one forward pass, by one person. not only are carpets deep cleaned faster but they are dry quicker than with any other system.

another plus! low moisture means no risk of carpet damage, shrinkage or mildewing caused by over wetting.

the lmx continues the evolution of a carpet cleaning phenomenon that has yet to be equalled.

the lmx meets all these certified testing standards.

easy to operate
no special skill is needed to operate the system. regular maintenance staff will do a professional job every time. just fill the tank, press two switches and go. dirty in front, clean in back. system comes with easy-to-follow training video and manual. bilingual instructions provided.

lightweight, compact, portable
outstanding unit weight/balance, speeds up the cleaning process, reducing operator fatigue. performance and results are not sacrificed. both the handle and tank are easily removed for space saving storage or transport.

easy, fast system access
the hood is easily removed for ready access to the entire system. adjustments or do-it-yourself parts replacements are done quickly with no specialized service tools. down time and labor costs are minimized.

dimensions length 24" width 17-1/2" height 15-1/2" (less handle
and detergent tank). 36" floor to top of handle.
shipping weight 74 pounds.
net weight 57 pounds with handle. 46 pounds without handle.
handle detachable.
solution tank capacity 5 gallons, hood mounted. detachable.
dirty solution
recovery tank capacity 3 gallons. clear, “see-through”.
power supply 110-120 volt, 50-60 hertz, 7.7 amperes. 220 volt
available, 50-60 hertz, 3.8 amperes
wattage 860 watts
motor 3/4 hp @ 10,000 rpm (full load) with permanently
lubricated bearings.
transmission primary drive train - helical gears permanently lubricated. secondary drive train - chain drive
*brush construction rigid vinyl core, with 1-1/8" tynex bristles secured by 3 layers of epoxy resin-impregnated heavy cord. length - 13" diameter - 4-3/4" *stiff bristle brush available.
controls 2 illuminated rocker type switches mounted on handle.
(color coded control panel.) red - motor and light control.
white - controls detergent through electric solenoid valve.
detergent flow control adjustable flow output, slow to fast.
defoaming process liquidator added directly into recovery tank de-foams for easy disposal.
color von schrader gray hood and detergent tank. clear
recovery tank. steel components - black epoxy painted for durability.
power supply cord 50 foot, non-marring, 3-wire.
drying time from 1 hour to less than 2 hours, depending on environmental humidity and carpet pile depth and density.
warranty 1 year warranty.

Parts

  • Product
  • Qty in Cart
  • Quantity
  • Price
  • Subtotal
  • Non-OEM
     - 120V 100 PSI Flo Jet pump 991-8009

    120V 100 PSI Flo Jet pump 991-8009

    $242.54
    Specifications:Weight: 4.6 poundsMatches:2130-5179.106-420.0M-43Alternative items:Below are other options that may meet your needs.(k) PUMP, 115v(Fan Cooled) (QBA) 100PSI$234.96993-2293Commonly purchased together:May fit on these models - select model...
    $242.54
    Qty in Cart: 0
    Price:
    $242.54
    Subtotal:
  • ships same day
    Non-OEM
     - 12 inch aluminum head wand, 2 jet, 120 PSI plastic valve 991-8001

    12 inch aluminum head wand, 2 jet, 120 PSI plastic valve 991-8001

    $278.64
    Ordering this item for a Nilfisk-Advance Aquaclean FLX or XP? If so please order 991-8158.Specifications:Weight: 6.02 poundsMaterial: PlasticType: WandNumber of Wand Bends: 1Number of Pieces Included: 1Length: 12Number of Spray Jets: 2Matches:W15302 ...
    $278.64
    Qty in Cart: 0
    Price:
    $278.64
    Subtotal:
  • ships same day
    Non-OEM
     - 1/8 inch adapter H37 991-8107

    1/8 inch adapter H37 991-8107

    $3.12
    Matches:H37Commonly purchased together:Fits on:Nilfisk-Advance AQUACLEAN 18FLXHost Company T5Tennant EX-SC-1020Nilfisk-Advance AQUACLEAN 15Tennant 1610Tennant E5Nilfisk-Advance AQUAPRO XPNilfisk-Advance AQUACLEAN XPTennant R3Tennant 1510CFR Corp PRO...
    $3.12
    Qty in Cart: 0
    Price:
    $3.12
    Subtotal:
  • Non-OEM
     - 120V 50 PSI Flo Jet pump 991-8008

    120V 50 PSI Flo Jet pump 991-8008

    $326.01
    Matches:2100-549M-42Alternative items:Below are other options that may meet your needs.PUMP$234.96993-0745May fit on these models - select model and diagram to confirmNilfisk-Advance AQUACLEAN 18FLXHost Company T5Tennant EX-SC-1020Nilfisk-Advance...
    $326.01
    Qty in Cart: 0
    Price:
    $326.01
    Subtotal:
  • ships same day
    Non-OEM
     - 20ft 100psi vac/sol hose assembly w/1/4 female & 1/4 male 991-8143

    20ft 100psi vac/sol hose assembly w/1/4 female & 1/4 male 991-8143

    $156.83
    Are you ordering this part for an Aquaclean FLX or XP extractor? If yes please see part numbers 272-1214, 991-8158, 991-8177 and 991-8148.Specifications:Weight: 8.175 poundsLength: 200 FTUsed for: Solution/VacuumColor: BlueQuick Connect Type:...
    $156.83
    Qty in Cart: 0
    Price:
    $156.83
    Subtotal:
  • Non-OEM
     - 1/8 fpt brass female connector 991-8220

    1/8 fpt brass female connector 991-8220

    $12.48
    Specifications:Material: BrassMatches:QD52STER 12FSCommonly purchased together:Fits on:Nilfisk-Advance AQUACLEAN 18FLXHost Company T5Tennant EX-SC-1020Nilfisk-Advance AQUACLEAN 15Tennant 1610Tennant E5Nilfisk-Advance AQUAPRO XPNilfisk-Advance AQUACLEAN...
    $12.48
    Qty in Cart: 0
    Price:
    $12.48
    Subtotal:
  • Non-OEM
     - B2C, 1/4 inch mpt, male nipple, mate to QD50 or QD55         991-8144

    B2C, 1/4 inch mpt, male nipple, mate to QD50 or QD55         991-8144

    $3.81
    Specifications:Weight: 0.05 poundsMatches:QD10Commonly purchased together:Fits on:Nilfisk-Advance AQUACLEAN 18FLXHost Company T5Tennant EX-SC-1020Nilfisk-Advance AQUACLEAN 15Tennant 1610Tennant E5Nilfisk-Advance AQUAPRO XPNilfisk-Advance AQUACLEAN...
    $3.81
    Qty in Cart: 0
    Price:
    $3.81
    Subtotal:
  • ships same day
    Non-OEM
     - 500psi brass valve 991-8227

    500psi brass valve 991-8227

    $53.72
    Specifications:Material: BrassMatches:FV2P-EZCommonly purchased together:May fit on these models - select model and diagram to confirmNilfisk-Advance AQUACLEAN 18FLXHost Company T5Tennant EX-SC-1020Nilfisk-Advance AQUACLEAN 15Tennant 1610Tennant...
    $53.72
    Qty in Cart: 0
    Price:
    $53.72
    Subtotal:
  • Total: items /

Adding your products to cart

Can't find what you need? Click here or call 1-800-USA-CLEAN
In the market for a new machine? You can find quality new and reconditioned floor care equipment at one of our vendor partners:
best live chat