Control your clean
Pick the model that meets your cleaning needs. Prevent over-wetting with an adjustable water pressure unit with built-in heater to increase cleaning power or choose the standard 100 psi model.
Simple maintenance, easy mobility
Get quick, easy access to working parts with the convenient clamshell design. The extractor’s large rear wheels increase mobility and allow for easier transportation on stairs.
Low cost life-cycle
Strong and robust construction means years of dependable use. The unique bladder design maximizes solution/recovery while minimizing the unit’s footprint.
• Straightforward, simple design makes this unit easy to use and maneuver
• Patented bladder design keeps machine compact
• Choose from a low pressure (100 psi) unit or adjustable pressure (0-250 psi) with heat extractor
Solution pump pressure: 100 psi / 6.9 bar
Solution pump voltage: 120 V
Solution pump amps: 1 A
Solution pump open flow rate: 1.8 gpm / 6.81 L/min
Description —
Airflow at 2 in / 50 mm orifice: 101 ft3 / 2.8 m3/h
Water lift at sealed orifice: 137 in / 3480 mm (LP) / 134 in /3403 mm (HPH)
Vacuum motor type: Single speed, tangential discharge, 5.7 in / 145 mm diameter, dual ball bearings, epoxy painted fan case; recognized by UL
Vacuum motor power: 1.66 hp / 1.23 kW (LP) / 2.5 hp / 1.87 kW (HPH)
Vacuum motor stages: 3 stage
Vacuum motor voltage: 120 V AC
Vacuum motor amps: 13 A (LP) / 10 A (HPH)
Solution tank capacity: 15 gal / 56.7 L
Recovery tank capacity: 19 gal / 71.9 L
Construction type: Rotationally-molded polyethylene
Caster diameter (locking): 4 in / 100 mm
Wheel diameter: 12 in / 305 mm
Power cord length: 25 ft / 7.6 m, 1 cord / 2 cord (EX-CAN-15 HPH)
Power cord type: 14 gauge 3 wire SJTO, recognized by UL and CSA, safety yellow, detachable
Tool/accessory description: Low pressure (EX-CAN-15 LP) / High pressure (EX-CAN-15 HPH) 13 in / 330 mm floor tool
with three spray jets, stainless steel wand/shoe, 15 ft x 1.5 in / 4.5 m x 380 mm vacuum hose, 15 ft x 3/8 in 4.5 m x 90 mm solution hose
Contact your sales representative or authorized distributor for information on additional accessories.
Length/Width/Height/Weight/Sound: L:38 in/965 mm, W:19 in/482 mm,H:38 in / 965 mm, Wt:110 lb / 49.8 kg (LP) 145 lb / 65.7 kg (HPH), 82 dBA
Approvals: CSA
Warranty: See your sales representative or authorized distributor for complete warranty details.
Tennant EX-CAN-15LP Parts and Support
Portable low and adjustable pressure canister carpet extractors make quick work in tight areas.
Control your clean
Pick the model that meets your cleaning needs. Prevent over-wetting with an adjustable water pressure unit with built-in heater to increase cleaning power or choose the standard 100 psi model.
Simple maintenance, easy mobility
Get quick, easy access to working parts with the convenient clamshell design. The extractor’s large rear wheels increase mobility and allow for easier transportation on stairs.
Low cost life-cycle
Strong and robust construction means years of dependable use. The unique bladder design maximizes solution/recovery while minimizing the unit’s footprint.
• Straightforward, simple design makes this unit easy to use and maneuver
• Patented bladder design keeps machine compact
• Choose from a low pressure (100 psi) unit or adjustable pressure (0-250 psi) with heat extractor
Solution pump pressure: 100 psi / 6.9 bar
Solution pump voltage: 120 V
Solution pump amps: 1 A
Solution pump open flow rate: 1.8 gpm / 6.81 L/min
Description —
Airflow at 2 in / 50 mm orifice: 101 ft3 / 2.8 m3/h
Water lift at sealed orifice: 137 in / 3480 mm (LP) / 134 in /3403 mm (HPH)
Vacuum motor type: Single speed, tangential discharge, 5.7 in / 145 mm diameter, dual ball bearings, epoxy painted fan case; recognized by UL
Vacuum motor power: 1.66 hp / 1.23 kW (LP) / 2.5 hp / 1.87 kW (HPH)
Vacuum motor stages: 3 stage
Vacuum motor voltage: 120 V AC
Vacuum motor amps: 13 A (LP) / 10 A (HPH)
Solution tank capacity: 15 gal / 56.7 L
Recovery tank capacity: 19 gal / 71.9 L
Construction type: Rotationally-molded polyethylene
Caster diameter (locking): 4 in / 100 mm
Wheel diameter: 12 in / 305 mm
Power cord length: 25 ft / 7.6 m, 1 cord / 2 cord (EX-CAN-15 HPH)
Power cord type: 14 gauge 3 wire SJTO, recognized by UL and CSA, safety yellow, detachable
Tool/accessory description: Low pressure (EX-CAN-15 LP) / High pressure (EX-CAN-15 HPH) 13 in / 330 mm floor tool
with three spray jets, stainless steel wand/shoe, 15 ft x 1.5 in / 4.5 m x 380 mm vacuum hose, 15 ft x 3/8 in 4.5 m x 90 mm solution hose
Contact your sales representative or authorized distributor for information on additional accessories.
Length/Width/Height/Weight/Sound: L:38 in/965 mm, W:19 in/482 mm,H:38 in / 965 mm, Wt:110 lb / 49.8 kg (LP) 145 lb / 65.7 kg (HPH), 82 dBA
Approvals: CSA
Warranty: See your sales representative or authorized distributor for complete warranty details.
Control your clean
Pick the model that meets your cleaning needs. Prevent over-wetting with an adjustable water pressure unit with built-in heater to increase cleaning power or choose the standard 100 psi model.
Simple maintenance, easy mobility
Get quick, easy access to working parts with the convenient clamshell design. The extractor’s large rear wheels increase mobility and allow for easier transportation on stairs.
Low cost life-cycle
Strong and robust construction means years of dependable use. The unique bladder design maximizes solution/recovery while minimizing the unit’s footprint.
• Straightforward, simple design makes this unit easy to use and maneuver
• Patented bladder design keeps machine compact
• Choose from a low pressure (100 psi) unit or adjustable pressure (0-250 psi) with heat extractor
Solution pump pressure: 100 psi / 6.9 bar
Solution pump voltage: 120 V
Solution pump amps: 1 A
Solution pump open flow rate: 1.8 gpm / 6.81 L/min
Description —
Airflow at 2 in / 50 mm orifice: 101 ft3 / 2.8 m3/h
Water lift at sealed orifice: 137 in / 3480 mm (LP) / 134 in /3403 mm (HPH)
Vacuum motor type: Single speed, tangential discharge, 5.7 in / 145 mm diameter, dual ball bearings, epoxy painted fan case; recognized by UL
Vacuum motor power: 1.66 hp / 1.23 kW (LP) / 2.5 hp / 1.87 kW (HPH)
Vacuum motor stages: 3 stage
Vacuum motor voltage: 120 V AC
Vacuum motor amps: 13 A (LP) / 10 A (HPH)
Solution tank capacity: 15 gal / 56.7 L
Recovery tank capacity: 19 gal / 71.9 L
Construction type: Rotationally-molded polyethylene
Caster diameter (locking): 4 in / 100 mm
Wheel diameter: 12 in / 305 mm
Power cord length: 25 ft / 7.6 m, 1 cord / 2 cord (EX-CAN-15 HPH)
Power cord type: 14 gauge 3 wire SJTO, recognized by UL and CSA, safety yellow, detachable
Tool/accessory description: Low pressure (EX-CAN-15 LP) / High pressure (EX-CAN-15 HPH) 13 in / 330 mm floor tool
with three spray jets, stainless steel wand/shoe, 15 ft x 1.5 in / 4.5 m x 380 mm vacuum hose, 15 ft x 3/8 in 4.5 m x 90 mm solution hose
Contact your sales representative or authorized distributor for information on additional accessories.
Length/Width/Height/Weight/Sound: L:38 in/965 mm, W:19 in/482 mm,H:38 in / 965 mm, Wt:110 lb / 49.8 kg (LP) 145 lb / 65.7 kg (HPH), 82 dBA
Approvals: CSA
Warranty: See your sales representative or authorized distributor for complete warranty details.
Parts
Can't find what you need? Click here or call 1-800-USA-CLEAN
Need a professional? We offer in person service.
Learn more
Diagrams
- View all diagrams
- - Extractor Fit All Parts
- Chassis Assembly
- Hand Tool Assembly - 3 inch
- Hand Tool Assembly - 5 inch
- Handle Assembly
- Low Pressure Upholstery Tool Assembly
- Low Pressure Wand Assembly
- Plumbing Assembly
- Pump Assembly
- Solution and Vacuum Hose Assembly
- Upper Housing Assembly
- Wiring Diagram