MAXIMISE SCRUBBING PRODUCTIVITY
Multiple scrub-head widths and powerful, large-capacity batteries deliver hours of productive, scrubbing time, and enable cleaning coverage rates up to 9500 m2/hr.
REACH A HIGHER LEVEL OF CLEANLINESS EVERY DAY
The 7300 tackles tough dirt, grime and grease with three down-pressure settings in addition to a SuperScrubâ„¢ mode, delivering the performance you need to meet your daily cleaning challenges.
RELY ON LONG-LASTING, WORRY-FREE OPERATION
Quality engineering and non-corrosive Duramer construction keep the 7300 rust-free and available to scrub day after day, year after year.
THE SAFEST WAY TO CLEAN
Increase safety and cleanliness with ec-H2O technology or FaST Foam Scrubbing Technology. The 7300 uses up to 70% less water with both technologies. ec-H2O technology uses no detergent. FaST Foam Scrubbing Technology uses up to 90% less detergent than traditional scrubber-dryers.
-Cleans up to three times longer using a single tank of water with
ec-H2O™ and FaST® technologies
-Dependable performance delivers a higher quality of cleanliness
-Reduces training time and increases productivity with intuitive
controls and low-maintenance design
Cleaning path
MaxProâ„¢ scrub head: 1020 mm
Edge scrub reach: 130 mm
Solution tank: 216 L
Productivity (per hour)
Theoretical max: 13067 m2/hr
Estimated coverage* (Conventional): 3400 m2/hr
Estimated coverage* (ec-H2O/FaST): 4532 m2/hr
Disc scrub head
Speed: 320 rpm
Down pressure weight (variable to): 225 kg
Brush diameter (2): 510 mm
Brush diameter (3) —
Brush motor (2): 0.75 kW
Cylindrical scrub head
Speed: 500 rpm
Down pressure weight (variable to): 225 kg
Brush diameter (2): 230 mm
Brush motor (2): 1.2 kW
Recovery tank: 281 L
Demisting chamber: 65 L
Vacuum fan speed: 14000 rpm
Vacuum water lift: 1655 mm
Vacuum fans (2): 0.65 kW
Propel speed forward (variable to): 8.8 km/h
Propel speed reverse (variable to): 4.8 km/h
Propel motor: 3.5 kW
Gradeability
Transport at gross weight: 8° / 14%
Working (scrubbing): 6° / 10.5%
Length: 2130 mm
Width: 1140 mm
Rear squeegee: 1295 mm
Height: 1445 mm
With overhead guard: 2070 mm
Weight: 895 kg
With standard: 500 Ah battery 1555 kg
Minimum aisle turn: 2335 mm
Tennant 7300 Parts and Support
The highly productive 7300 scrubber-dryer creates clean, safe environments that meet the highest standards. Even in the harshest industrial conditions, the 7300 delivers legendary Tennant performance.
MAXIMISE SCRUBBING PRODUCTIVITY
Multiple scrub-head widths and powerful, large-capacity batteries deliver hours of productive, scrubbing time, and enable cleaning coverage rates up to 9500 m2/hr.
REACH A HIGHER LEVEL OF CLEANLINESS EVERY DAY
The 7300 tackles tough dirt, grime and grease with three down-pressure settings in addition to a SuperScrubâ„¢ mode, delivering the performance you need to meet your daily cleaning challenges.
RELY ON LONG-LASTING, WORRY-FREE OPERATION
Quality engineering and non-corrosive Duramer construction keep the 7300 rust-free and available to scrub day after day, year after year.
THE SAFEST WAY TO CLEAN
Increase safety and cleanliness with ec-H2O technology or FaST Foam Scrubbing Technology. The 7300 uses up to 70% less water with both technologies. ec-H2O technology uses no detergent. FaST Foam Scrubbing Technology uses up to 90% less detergent than traditional scrubber-dryers.
-Cleans up to three times longer using a single tank of water with
ec-H2O™ and FaST® technologies
-Dependable performance delivers a higher quality of cleanliness
-Reduces training time and increases productivity with intuitive
controls and low-maintenance design
Cleaning path
MaxProâ„¢ scrub head: 1020 mm
Edge scrub reach: 130 mm
Solution tank: 216 L
Productivity (per hour)
Theoretical max: 13067 m2/hr
Estimated coverage* (Conventional): 3400 m2/hr
Estimated coverage* (ec-H2O/FaST): 4532 m2/hr
Disc scrub head
Speed: 320 rpm
Down pressure weight (variable to): 225 kg
Brush diameter (2): 510 mm
Brush diameter (3) —
Brush motor (2): 0.75 kW
Cylindrical scrub head
Speed: 500 rpm
Down pressure weight (variable to): 225 kg
Brush diameter (2): 230 mm
Brush motor (2): 1.2 kW
Recovery tank: 281 L
Demisting chamber: 65 L
Vacuum fan speed: 14000 rpm
Vacuum water lift: 1655 mm
Vacuum fans (2): 0.65 kW
Propel speed forward (variable to): 8.8 km/h
Propel speed reverse (variable to): 4.8 km/h
Propel motor: 3.5 kW
Gradeability
Transport at gross weight: 8° / 14%
Working (scrubbing): 6° / 10.5%
Length: 2130 mm
Width: 1140 mm
Rear squeegee: 1295 mm
Height: 1445 mm
With overhead guard: 2070 mm
Weight: 895 kg
With standard: 500 Ah battery 1555 kg
Minimum aisle turn: 2335 mm
MAXIMISE SCRUBBING PRODUCTIVITY
Multiple scrub-head widths and powerful, large-capacity batteries deliver hours of productive, scrubbing time, and enable cleaning coverage rates up to 9500 m2/hr.
REACH A HIGHER LEVEL OF CLEANLINESS EVERY DAY
The 7300 tackles tough dirt, grime and grease with three down-pressure settings in addition to a SuperScrubâ„¢ mode, delivering the performance you need to meet your daily cleaning challenges.
RELY ON LONG-LASTING, WORRY-FREE OPERATION
Quality engineering and non-corrosive Duramer construction keep the 7300 rust-free and available to scrub day after day, year after year.
THE SAFEST WAY TO CLEAN
Increase safety and cleanliness with ec-H2O technology or FaST Foam Scrubbing Technology. The 7300 uses up to 70% less water with both technologies. ec-H2O technology uses no detergent. FaST Foam Scrubbing Technology uses up to 90% less detergent than traditional scrubber-dryers.
-Cleans up to three times longer using a single tank of water with
ec-H2O™ and FaST® technologies
-Dependable performance delivers a higher quality of cleanliness
-Reduces training time and increases productivity with intuitive
controls and low-maintenance design
Cleaning path
MaxProâ„¢ scrub head: 1020 mm
Edge scrub reach: 130 mm
Solution tank: 216 L
Productivity (per hour)
Theoretical max: 13067 m2/hr
Estimated coverage* (Conventional): 3400 m2/hr
Estimated coverage* (ec-H2O/FaST): 4532 m2/hr
Disc scrub head
Speed: 320 rpm
Down pressure weight (variable to): 225 kg
Brush diameter (2): 510 mm
Brush diameter (3) —
Brush motor (2): 0.75 kW
Cylindrical scrub head
Speed: 500 rpm
Down pressure weight (variable to): 225 kg
Brush diameter (2): 230 mm
Brush motor (2): 1.2 kW
Recovery tank: 281 L
Demisting chamber: 65 L
Vacuum fan speed: 14000 rpm
Vacuum water lift: 1655 mm
Vacuum fans (2): 0.65 kW
Propel speed forward (variable to): 8.8 km/h
Propel speed reverse (variable to): 4.8 km/h
Propel motor: 3.5 kW
Gradeability
Transport at gross weight: 8° / 14%
Working (scrubbing): 6° / 10.5%
Length: 2130 mm
Width: 1140 mm
Rear squeegee: 1295 mm
Height: 1445 mm
With overhead guard: 2070 mm
Weight: 895 kg
With standard: 500 Ah battery 1555 kg
Minimum aisle turn: 2335 mm
Parts
Can't find what you need? Click here or call 1-800-USA-CLEAN
Need a professional? We offer in person service.
Learn more
Diagrams
- View all diagrams
- - Batteries, Brushes, and Charger
- - Frequently Replaced Parts
- - Pad Holders
- - Pads - 16 inch
- - Pads - 20 inch
- Backup Alarm Assembly
- Battery Assembly
- Battery Charger Assembly
- Battery Forklift Assembly
- Battery Rollout Assembly
- Battery Tray Assembly
- Brake Pedal Assembly
- Brush Assembly - MaxPro 1000
- Brush Assembly - MaxPro 1200
- Brush Motor and Pivot Assembly
- Circuit Board Assembly
- Control Box Circuit Breaker Assembly
- Control Box Contactor Assembly - After SN 001705
- Control Box Contactor Assembly - Before SN 001706
- Control Box Wires Assembly
- Debris Tray Assembly - Cylindrical - Max Pro 1000
- Debris Tray Assembly - Cylindrical - Max Pro 1200
- Decal Assembly
- Detergent Metering Assembly
- Directional Control Assembly
- ec-H2O Module Breakdown Assembly - 9006270
- ec-H2O Solution Pump Assembly
- ec-H2O Solution Pump Breakdown Assembly
- ec-H2O Switch and Decal Assembly
- ec-H2O Wire Harness Assembly
- Edge Scrub Assembly - Cylindrical - Max Pro 1000
- Edge Scrub Assembly - Cylindrical - Max Pro 1200
- Edge Scrub Assembly - Disc - Max Pro 1000
- Edge Scrub Assembly - Disc - Max Pro 1200
- Electric Motor Breakdown Assembly - 17363
- Electric Motor Breakdown Assembly - 386050
- Electric Motor Breakdown Assembly - 386679
- Electric Motor Breakdown Assembly - 386687
- Electric Motor Breakdown Assembly - 387585
- Electric Motor Breakdown Assembly - 398520
- Electric Motor Breakdown Assembly - 60198
- Electrical Schematic 1 - After SN 003746
- Electrical Schematic 1 - Before SN 003747
- Electrical Schematic 2 - After SN 003746
- Electrical Schematic 2 - Before SN 003747
- Electrical Schematic 3 - After SN 003746
- ES Drain Assembly
- ES Pump Assembly
- ES Tank Assembly
- FaST Air Pump and Detergent Assembly - Before SN 003747
- FaST Electrical Assembly
- FaST Foam Filter Assembly - Before SN 003747
- FaST Injector Breakdown Assembly - 1070035
- FaST Pumps and Detergent Assembly - After SN 003746
- FaST Solution Pump Assembly - Before SN 003747
- FaST Wire Harness Assembly - After SN 003746
- FaST Wire Harness Assembly - Before SN 003747
- Fire Extinguisher Assembly
- Front Cover Assembly
- Front Drive Wheel Assembly
- Hydraulic Motor Breakdown Assembly - 386703
- Hydraulic Powerunit Breakdown Assembly - 368704
- Instrument Panel Assembly
- Left Side Brush Mount Assembly
- Left Side Brush Wire Harness Assembly
- Left Side Squeegee Assembly - Cylindrical - Max Pro 1200
- Left Side Squeegee Assembly - Cylindrical - Max Pro 1000
- Left Side Squeegee Assembly - Disc - Max Pro 1000
- Left Side Squeegee Assembly - Disc - Max Pro 1200
- Low Water Level Assembly
- Main Frame Assembly
- Main Wire Harness Assembly
- Metering Solution Pump Breakdown Assembly - 386364
- Overhead Guard Assembly
- Positive Solution Control Drain Assembly - Recovery Tank
- Positive Solution Control Drain Assembly - Solution Tank
- Power Steering Assembly
- Power Steering Hydraulic Hose Assembly
- Power Steering Hydraulic Wiring Diagram
- Power Wand Assembly
- Power Wand Hose Assembly
- Power Wand Mount Assembly
- Power Wand Pump and Fittings Assembly
- Rear Bumper Assembly
- Rear Cover Assembly
- Rear Squeegee Assembly - Max Pro 1000
- Rear Squeegee Assembly - Max Pro 1200
- Rear Squeegee for Vacuumized Side Squeegee Assembly - Max Pro 1200
- Rear Squeegee Lift Assembly
- Rear Squeegee Linkage Assembly
- Rear Wheel and Brake Assembly
- Recovery Tank Assembly
- Recovery Tank Drain Assembly
- Revolving Light Assembly
- Revolving Light Overhead Guard Assembly
- Right Side Brush Bumper and Electrical Assembly
- Right Side Brush Wire Harness Assembly
- Right Side Squeegee Assembly - Cylindrical - Max Pro 1200
- Right Side Squeegee Assembly - Cylindrical - Max Pro 1000
- Right Side Squeegee Assembly - Disc - Max Pro 1000
- Right Side Squeegee Assembly - Disc - Max Pro 1200
- Right Side Vacuumized Squeegee - Disc - Max Pro 1200
- Scrub Head Drive Assembly - Cylindrical - Max Pro 1000
- Scrub Head Drive Assembly - Cylindrical - Max Pro 1200
- Scrub Head Frame and Linkage Assembly - Cylindrical - Max Pro 1000
- Scrub Head Frame and Linkage Assembly - Cylindrical - Max Pro 1200
- Scrub Head Frame Assembly - Disc - Max Pro 1000
- Scrub Head Frame Assembly - Disc - Max Pro 1200
- Scrub Head Lift Assembly
- Scrub Head Linkage Assembly - Disc - Max Pro 1000
- Scrub Head Linkage Assembly - Disc - Max Pro 1200
- Seat Assembly
- Seat Belt Assembly
- Side Brush Lift Assembly
- Solution Control Assembly
- Solution Tank Assembly
- Solution Valve Assembly - Cylindrical - Max Pro 1000
- Solution Valve Assembly - Cylindrical - Max Pro 1000 - FaST/ec-H2O
- Solution Valve Assembly - Cylindrical - Max Pro 1200
- Solution Valve Assembly - Cylindrical - Max Pro 1200 - FaST/ec-H2O
- Solution Valve Assembly - Disc - Max Pro 1000
- Solution Valve Assembly - Disc - Max Pro 1000 - FaST/ec-H2O
- Solution Valve Assembly - Disc - Max Pro 1200
- Solution Valve Assembly - Disc - Max Pro 1200 - FaST/ec-H2O
- Squeegee Assembly - Urethane
- Steering Assembly
- Steering Control Valve Breakdown Assembly - 373495
- Telemetry Assembly - After SN 005973
- Vacuum Fan Assembly
- Vacuum Wand Assembly
- Vacuumized Debris Tray Assembly - Cylindrical - Max Pro 1000
- Vacuumized Debris Tray Assembly - Cylindrical - Max Pro 1200
- Water Pump Breakdown Assembly - 387321
Manuals
- 7300 operator manual_2014
- 7300 parts manual_2013
- 7300 service manual_2002
- Tennant ecH2O Service Testing