Theoretical performance per hour: 12,270.9 sq ft (1,140 sq m)
Working width: 15 in (38 cm)
Squeegee width: 21.7 in (55 cm)
Solution tank capacity: 2.6gal (10L)
Recovery tank capacity: 2.6gal (10L)
Rated voltage: 24V
Battery capacity (up to 1 hour): 25 Ah
Weight (ready for use): 147.7lbs (67 kg)
Dimensions, Length x Width x Height: 31.1 x 17.7 x 17 in (79 x 45 x 43 cm)
Brush pressure: 37.5lbs (17 kg)
Sound level: <70 dB(A) Interactive Service Guide
TASKI by Diversey SWINGO 350B Parts and Support
The Taski swingo 350B is a corded or battery-powered, manually operated autoscrubber. Its small profile allows it to clean in tight workspaces. Optional, onboard Li Ion battery provides over an hour of cleaning time, with charging only taking 2.5 hours. The swingo 350B is lightweight thanks to the Li Ion battery, which is significantly lighter than other gel batteries.
Theoretical performance per hour: 12,270.9 sq ft (1,140 sq m)
Working width: 15 in (38 cm)
Squeegee width: 21.7 in (55 cm)
Solution tank capacity: 2.6gal (10L)
Recovery tank capacity: 2.6gal (10L)
Rated voltage: 24V
Battery capacity (up to 1 hour): 25 Ah
Weight (ready for use): 147.7lbs (67 kg)
Dimensions, Length x Width x Height: 31.1 x 17.7 x 17 in (79 x 45 x 43 cm)
Brush pressure: 37.5lbs (17 kg)
Sound level: <70 dB(A)
Theoretical performance per hour: 12,270.9 sq ft (1,140 sq m)
Working width: 15 in (38 cm)
Squeegee width: 21.7 in (55 cm)
Solution tank capacity: 2.6gal (10L)
Recovery tank capacity: 2.6gal (10L)
Rated voltage: 24V
Battery capacity (up to 1 hour): 25 Ah
Weight (ready for use): 147.7lbs (67 kg)
Dimensions, Length x Width x Height: 31.1 x 17.7 x 17 in (79 x 45 x 43 cm)
Brush pressure: 37.5lbs (17 kg)
Sound level: <70 dB(A)
Parts
Can't find what you need? Click here or call 1-800-USA-CLEAN
Need a professional? We offer in person service.
Learn more
Diagrams
- View all diagrams
- - Batteries, Brushes and Chargers
- - Frequently Replaced Parts
- - Know Your Machine
- - Manufacturer Recommended Stocking Parts
- - Pad Holders
- -Simplified Electrical System
- -Simplified Recovery System
- -Simplified Solution System
- Base Assembly
- Battery Assembly
- Brush and Motor Assembly
- Filter Assembly
- Guide Bar Assembly
- Handle Assembly
- Squeegee Assembly
- Squeegee Bracket Assembly
- Tank and Lid Assembly
- Vacuum Motor Assembly
- Wiring Diagram
Manuals
- Swingo 350B parts manual Series 3_2023
- Swingo 350B parts_Series 3_2024
- TASKI swingo 350B Technical Manual V2.0
- TASKI swingo 350B User Manual
Bulletins
- Batteries Information_2017
- Charger_2020
- Charging Process Adjustment_2015
- Dipswitch Setting_2016
- Distance Piece Charging Plug_2015
- Electronic Harmonisation_2013
- Electronics Board Layout Change_2020
- Electronics Compatibility_2012
- Firmware Update v2.12_2011
- Float Modification_2011
- Harmonization of Front Blade Lever_2012
- Intellidose Electronics Revision_2017
- Magnetic Valve_2018
- Marking of Connection_2015
- New Articulation_2012
- New Bumper Wheels_2003
- New Ceramic Axle_2016
- New Charger Firmware_2017
- New charger for Swingo 350B_2022
- New Charger Installation_2016
- New Charger_2016
- New Firmware 3.04_2013
- New Firmware v2.34_2013
- New Firmware v3.09_2013
- New Firmware v3.13_2015
- New Firmware v3.14_2016
- New Firmware v3.15_2018
- New Generation Charger_2015
- New Suction Hose_2017
- New Vacuum Motor for B-Model 04E_2022
- Parking Lever Modification_2017
- Poly-V Belt Pulley Securing_2019
- Service Tool Update v4.04_2011
- Service Tool Update v6.04_2012
- Service Tool Update v7.04_2013
- Service Tool Update v7.09_2014
- Service Tool v8.01_2015
- Service Tool version 8.30_2021
- TASKI Service Tool Version 8.12_2016
- Taski Swingo 350B GTS Newsletter- Charger Replacement Kit
- TASKI swingo 350B Nexsys Battery Conversion
- TASKI swingo 350B TSS Bulletin - Battery Installation and Firmware Guide
- TASKI swingo 350B TSS Bulletin - Charger Won't Charge
- TASKI swingo 350B TSS Bulletin - Recovery Tank Plug
- TASKI swingo 350B TSS Bulletin - Squeegee Support Bracket Upgrade
- TASKI TSS Bulletin - Rating Plate Breakdown
- Update on Charger_2011
- Upgraded IntelliTrail System_2015
- Vacuum Motor Harmonisation_2008
- Water Supply Pump_2018
Videos
- How to Replace the Brush Belt on the Taski Swingo 350B
- How to Replace the Brush Roll on the Taski Swingo 350B
- How to Replace the Float and Filter on the Taski Swingo 350B
- How to Replace the Front Squeegee on the Taski Swingo 350B
- How to Replace the Recovery Tank Lid Gasket on the Taski Swingo 350B
- How to Replace the Solenoid on the Taski Swingo 350B
- How to Replace the Squeegee Assembly on the Taski Swingo 350B
- swingo 350B Solution Flow Issues Video
- TASKI Power/Control Board Testing Video
- TASKI swingo 350B Enersys Battery Install Video
- TASKI swingo 350B Service Introduction Video
- USA-CLEAN Overview on the Taski Swingo 350B
Repair Guides
- Check brush bearings
- Check brush bearings
- Check brush for locked up condition
- Check for brush wear
- Check for debris and remove if necessary
- Check for power to the motor
- Check the brush drive belt
- Check the brush drive belt pulley's.
- Re-start machine
- Replace bad bearing
- Replace the Brush
- Replace the brush bearing(s)
- Replace the brush drive belt
- Replace the brush drive pulley
- Replace the brush motor
- Charge the batteries
- Charge the battery
- Check battery gauge and charger status light
- Check battery gauge and charger status light
- Check battery gauge and charger status light
- Check battery gauge and charger status light
- Check battery guage and charger status light
- Check battery voltage
- Check for power to the brush motor
- Check for power to the control panel
- Check for power to the pump
- Check for power to the vacuum motor
- Check outputs from the control panel
- Check power outputs from the main board
- Check ribbon cable for damage
- Check the charger and battery type settings
- Check the fuse
- Check wiring to vacuum motor
- Do a load test on the batteries
- Install the Batteries
- Repair or replace the wiring to the pump
- Repair or replace wiring to the brush motor
- Replace or repair wiring
- Replace the batteries
- Replace the battery charger
- Replace the brush motor
- Replace the control panel
- Replace the fuse
- Replace the main power board
- Replace the pump
- Replace the ribbon cable
- Replace the wiring to the control board
- Verify good battery connections
- Check for Missing Plugs or Seals on Recovery Tank
- Check squeegee condition.
- Check the filter screen
- Check the float
- Check the recovery tank lid gasket
- Check the squeegee vacuum hose for damage
- Check the squeegee vacuum hose for leaks
- Check the tank for leaks
- Replace the filter screen
- Replace the float
- Replace the Front Wiping Blade
- Replace the leaking tank
- Replace the leaking vacuum hose
- Replace the recovery tank lid gasket
- Replace the Squeegee Blades
- Replace the squeegee vacuum hose
- Replace the Vacuum Motor
- Check computer requirements
- Check if correct USB is being used
- Check if current Service Tool has been downloaded to Desktop
- Check that default drivers are not being used
- Check that machine is on
- Check that Service Tool has reconnected after firmware download
- Check that the appropriate firmware has been selected
- Check that the Service Tool and machine are still connected
- Check tool requirements
- Click the download start button
- Connect Service Tool to appropriate machine
- Make sure connection is not lost during download process
- Select the correct driver
- USB cable needs to connect machine to computer
- Check for power to the pump
- Check solution flow from the pump.
- Check the checkvalve
- Check the hose between the filter and pump for leaks.
- Check the hose between the tank and the filter
- Check the hoses and checkvalve between the pump and manifold for leaks
- Check the manifold
- Check the manifold for leaks.
- Check the pump for leaks.
- Clean and Replace the Solution Filter
- Replace the checkvalve
- Replace the hose between the solution filter and pump.
- Replace the leaking hose between the tank and the solution filter
- Replace the leaking hose or checkvalve.
- Replace the leaking manifold.
- Replace the leaking pump.
- Replace the manifold.
- Replace the pump
- Replace the solution tank
- SOLUTION TANK MODIFICATION FOR MACHINES BEFORE SN2949
Docs
- Enersys Nexsys Battery Warranty Statement
- TASKI - swingo 350B/E, 455B, 755B, 855B, 1255B, 1650B, 1850B - Warranty
- Taski Service Tool and Firmware 8.30
- Taski Swingo 350B Specifications
- TASKI swingo 350B and 350E - Maintenance Schedule
- TASKI swingo 350B Battery Specification
- TASKI swingo 350B Know Your Machine
- TASKI swingo 350B Service Light Reset
- TASKI swingo 350B Troubleshooting Guide
- TASKI swingo 350B wall chart
- TASKI swingo 350B&E, 455B,755B,855B,1255B,1650B,1850B Limited Warranty as of November 2014