-
ships same dayOEM
TASKI 4122571 Sealing profile (sold by the inch)
SKU: 192-6334$0.50This part is sold by the inch. We recommend ordering 40 inches if one meter is required.Specifications:Weight: 0.01 POUNDSMatches:4122571K4122571K8662/010Fits on:$0.50 -
ships same dayOEM
TASKI 4053660 Wire reinforced hose (sold by the inch)
SKU: 192-0400$0.50This part is sold by the inch. We recommend ordering 40 inches if one meter is required.Specifications:Weight: 0.375 POUNDSMatches:40536609.109-802.09104892091098020K4053660K8820/105Fits on:$0.50 -
ships same dayNon-OEM
Aftermarket 8.600-507.0 Center-Lok 3 pad holder
SKU: 991-2206$30.92This is the spring clip type. Some users prefer the thread on type part number 991-2202. They are interchangable.Specifications:Gasket U O M: INHoses Inside Diameter U O M: INHoses Length U O M:...$30.92 -
ships same dayNon-OEM
Aftermarket 792455 Big mouth pad holder set (blue)
SKU: 991-2202$37.11This is the thread on type. Some users perfer the spring clip type part number 991-2206. They are interchangable.Specifications:Weight: 0.01 pounds$37.11 -
ships same dayNon-OEM
Aftermarket 792450 Big mouth pad holder (left hand thread)
SKU: 996-0372$37.11Big mouth pad holder (left hand thread)$37.11 -
ships same dayOEM
Aftermarket 991-1209 24V vacuum motor
SKU: 192-0770$289.8024V vacuum motorSpecifications:Gasket U O M: INHoses Inside Diameter U O M: INHoses Length U O M: INVacuum Motor Stage: 2Vacuum Motor Volts: 24Weight: 4.9 POUNDSMatches:$289.80 -
ships same dayOEM
TASKI 4128587 Squeegee blade rear
SKU: 192-8826$37.88Squeegee blade rearSpecifications:Gasket U O M: INHoses Inside Diameter U O M: INHoses Length U O M: INSqueegee Blades Color: TanSqueegee Blades Location: RearWeight: 0.159 POUNDSMatches:$37.88 -
ships same dayOEM
TASKI 4128588 Squeegee blade front
SKU: 192-8827$36.16Squeegee blade frontSpecifications:Gasket U O M: INHoses Inside Diameter U O M: INHoses Length U O M: INWeight: 0.123 POUNDSMatches:4128588753510782163K12200-66K4128588Fit$36.16 -
ships same dayOEM
TASKI 4130411 Filter kit
SKU: 292-0082$9.07Specifications:Weight: 0.05 poundsColor: Blue$9.07ships same dayOEM
TASKI 4122639 Screw 60 x 20 torx head
SKU: 192-1561$2.26Screw 60 x 20 torx headSpecifications:Gasket U O M: INHoses Inside Diameter U O M: INHoses Length U O M: INWeight: 0.01 POUNDSMatches:412263986738680K1840/050K4122639Fits$2.26ships same dayNon-OEM
Aftermarket 792405 Center-Lok II pad holder - left hand thread (red)
SKU: 991-2214$40.84Center-Lok II pad holder - left hand thread (red)$40.84ships same dayNon-OEM
Aftermarket 8.600-165.0 Center-Lok II pad holder - right hand thread (black)
SKU: 991-2201$40.84Center-Lok II pad holder - right hand thread (black)$40.84ships same dayNon-OEM
CROWNBAT 12CE33 12V 35Ah AGM battery
SKU: 162-0001$125.17Comes with (2) 999-0394 - 1/4-20 x 1 3/4 hex head bolts. If ordering for the Pioneer SpeedStar please check the diagrams to verify this is the correct battery for your serial number. There are two...$125.17ships same dayOEM
TASKI 4125513 Float
SKU: 192-3780$24.21FloatSpecifications:Gasket U O M: INHoses Inside Diameter U O M: INHoses Length U O M: INWeight: 0.05 POUNDSMatches:4125513K17451-37K4125513Fits on:<$24.21ships same dayOEM
TASKI 7516863 Standard scrubbing brush with bearing (red wear bristle)
SKU: 192-8781$78.28Teflon Specifications:Gasket U O M: INHoses Inside Diameter U O M: INHoses Length U O M: INWeight: 1.984 POUNDSMatches:75168637535107814569.105-137.091051370K7516863<$78.28ships same dayOEM
TASKI 4128605 Wiping blade
SKU: 192-8873$31.96Wiping bladeSpecifications:Weight: 0.11 POUNDSMatches:4128605K12200-67K4128605Fits on:$31.96ships same dayOEM
TASKI 4126089 Screen
SKU: 192-6427$7.07ScreenSpecifications:Gasket U O M: INHoses Inside Diameter U O M: INHoses Length U O M: INWeight: 0.1 POUNDSMatches:4126089K17450-72K4126089Fits on:<$7.07ships same dayNon-OEM
FASTENAL MN2550000A40000 Nut M6-1 hex stainless steel
SKU: 999-1308$0.99Nut M6-1 hex stainless steelSpecifications:Weight: 0.1 POUNDSMatches:.60CNFHEZ/934.6CNFHZ.6CNH8Z01000005333005-3330778510443271105123111160511216051140305120220421459960000$0.99ships same dayOEM
$10.66ships same dayOEM
TASKI 4127029 Recovery drain plug
SKU: 192-8852$3.02Recovery drain plugSpecifications:Gasket U O M: INHoses Inside Diameter U O M: INHoses Length U O M: INWeight: 0.044 POUNDSMatches:4127029K17451-66K4127029Fits on:$3.02
Can't find what you need? Click here or call 1-800-USA-CLEAN
Need a professional? We offer in person service.
Learn more
Diagrams
- View all diagrams
- - Batteries, Brushes and Chargers
- - Frequently Replaced Parts
- - Know Your Machine
- - Manufacturer Recommended Stocking Parts
- - Pad Holders
- -Simplified Electrical System
- -Simplified Recovery System
- -Simplified Solution System
- Base Assembly
- Battery Assembly
- Brush and Motor Assembly
- Filter Assembly
- Guide Bar Assembly
- Handle Assembly
- Squeegee Assembly
- Squeegee Bracket Assembly
- Tank and Lid Assembly
- Vacuum Motor Assembly
- Wiring Diagram
Manuals
- Swingo 350B parts manual Series 3_2023
- Swingo 350B parts_Series 3_2024
- TASKI swingo 350B Technical Manual V2.0
- TASKI swingo 350B User Manual
Bulletins
- Batteries Information_2017
- Charger_2020
- Charging Process Adjustment_2015
- Dipswitch Setting_2016
- Distance Piece Charging Plug_2015
- Electronic Harmonisation_2013
- Electronics Board Layout Change_2020
- Electronics Compatibility_2012
- Firmware Update v2.12_2011
- Float Modification_2011
- Harmonization of Front Blade Lever_2012
- Intellidose Electronics Revision_2017
- Magnetic Valve_2018
- Marking of Connection_2015
- New Articulation_2012
- New Bumper Wheels_2003
- New Ceramic Axle_2016
- New Charger Firmware_2017
- New charger for Swingo 350B_2022
- New Charger Installation_2016
- New Charger_2016
- New Firmware 3.04_2013
- New Firmware v2.34_2013
- New Firmware v3.09_2013
- New Firmware v3.13_2015
- New Firmware v3.14_2016
- New Firmware v3.15_2018
- New Generation Charger_2015
- New Suction Hose_2017
- New Vacuum Motor for B-Model 04E_2022
- Parking Lever Modification_2017
- Poly-V Belt Pulley Securing_2019
- Service Tool Update v4.04_2011
- Service Tool Update v6.04_2012
- Service Tool Update v7.04_2013
- Service Tool Update v7.09_2014
- Service Tool v8.01_2015
- Service Tool version 8.30_2021
- TASKI Service Tool Version 8.12_2016
- Taski Swingo 350B GTS Newsletter- Charger Replacement Kit
- TASKI swingo 350B Nexsys Battery Conversion
- TASKI swingo 350B TSS Bulletin - Battery Installation and Firmware Guide
- TASKI swingo 350B TSS Bulletin - Charger Won't Charge
- TASKI swingo 350B TSS Bulletin - Recovery Tank Plug
- TASKI swingo 350B TSS Bulletin - Squeegee Support Bracket Upgrade
- TASKI TSS Bulletin - Rating Plate Breakdown
- Update on Charger_2011
- Upgraded IntelliTrail System_2015
- Vacuum Motor Harmonisation_2008
- Water Supply Pump_2018
Videos
- How to Replace the Brush Belt on the Taski Swingo 350B
- How to Replace the Brush Roll on the Taski Swingo 350B
- How to Replace the Float and Filter on the Taski Swingo 350B
- How to Replace the Front Squeegee on the Taski Swingo 350B
- How to Replace the Recovery Tank Lid Gasket on the Taski Swingo 350B
- How to Replace the Solenoid on the Taski Swingo 350B
- How to Replace the Squeegee Assembly on the Taski Swingo 350B
- swingo 350B Solution Flow Issues Video
- TASKI Power/Control Board Testing Video
- TASKI swingo 350B Enersys Battery Install Video
- TASKI swingo 350B Service Introduction Video
- USA-CLEAN Overview on the Taski Swingo 350B
Repair Guides
- Check brush bearings
- Check brush bearings
- Check brush for locked up condition
- Check for brush wear
- Check for debris and remove if necessary
- Check for power to the motor
- Check the brush drive belt
- Check the brush drive belt pulley's.
- Re-start machine
- Replace bad bearing
- Replace the Brush
- Replace the brush bearing(s)
- Replace the brush drive belt
- Replace the brush drive pulley
- Replace the brush motor
- Charge the batteries
- Charge the battery
- Check battery gauge and charger status light
- Check battery gauge and charger status light
- Check battery gauge and charger status light
- Check battery gauge and charger status light
- Check battery guage and charger status light
- Check battery voltage
- Check for power to the brush motor
- Check for power to the control panel
- Check for power to the pump
- Check for power to the vacuum motor
- Check outputs from the control panel
- Check power outputs from the main board
- Check ribbon cable for damage
- Check the charger and battery type settings
- Check the fuse
- Check wiring to vacuum motor
- Do a load test on the batteries
- Install the Batteries
- Repair or replace the wiring to the pump
- Repair or replace wiring to the brush motor
- Replace or repair wiring
- Replace the batteries
- Replace the battery charger
- Replace the brush motor
- Replace the control panel
- Replace the fuse
- Replace the main power board
- Replace the pump
- Replace the ribbon cable
- Replace the wiring to the control board
- Verify good battery connections
- Check for Missing Plugs or Seals on Recovery Tank
- Check squeegee condition.
- Check the filter screen
- Check the float
- Check the recovery tank lid gasket
- Check the squeegee vacuum hose for damage
- Check the squeegee vacuum hose for leaks
- Check the tank for leaks
- Replace the filter screen
- Replace the float
- Replace the Front Wiping Blade
- Replace the leaking tank
- Replace the leaking vacuum hose
- Replace the recovery tank lid gasket
- Replace the Squeegee Blades
- Replace the squeegee vacuum hose
- Replace the Vacuum Motor
- Check computer requirements
- Check if correct USB is being used
- Check if current Service Tool has been downloaded to Desktop
- Check that default drivers are not being used
- Check that machine is on
- Check that Service Tool has reconnected after firmware download
- Check that the appropriate firmware has been selected
- Check that the Service Tool and machine are still connected
- Check tool requirements
- Click the download start button
- Connect Service Tool to appropriate machine
- Make sure connection is not lost during download process
- Select the correct driver
- USB cable needs to connect machine to computer
- Check for power to the pump
- Check solution flow from the pump.
- Check the checkvalve
- Check the hose between the filter and pump for leaks.
- Check the hose between the tank and the filter
- Check the hoses and checkvalve between the pump and manifold for leaks
- Check the manifold
- Check the manifold for leaks.
- Check the pump for leaks.
- Clean and Replace the Solution Filter
- Replace the checkvalve
- Replace the hose between the solution filter and pump.
- Replace the leaking hose between the tank and the solution filter
- Replace the leaking hose or checkvalve.
- Replace the leaking manifold.
- Replace the leaking pump.
- Replace the manifold.
- Replace the pump
- Replace the solution tank
- SOLUTION TANK MODIFICATION FOR MACHINES BEFORE SN2949
Docs
- Enersys Nexsys Battery Warranty Statement
- TASKI - swingo 350B/E, 455B, 755B, 855B, 1255B, 1650B, 1850B - Warranty
- Taski Service Tool and Firmware 8.30
- Taski Swingo 350B Specifications
- TASKI swingo 350B and 350E - Maintenance Schedule
- TASKI swingo 350B Battery Specification
- TASKI swingo 350B Know Your Machine
- TASKI swingo 350B Service Light Reset
- TASKI swingo 350B Troubleshooting Guide
- TASKI swingo 350B wall chart
- TASKI swingo 350B&E, 455B,755B,855B,1255B,1650B,1850B Limited Warranty as of November 2014