Key features
• Highest flexibility due to exchangable Li-Ion battery
• Easy cleaning of confined areas
• Perfect cleaning results and immediately dry floors
• Easy storage
Highest flexibility due to Li-Ion technology
The battery driven small scrubber drier is designed for flexible use and perfectly suitable for quick cleaning / spot cleaning of reception areas, in washrooms, small shops and restaurants. The batteries last 20 minutes but can easily be replaced by the operator, which leads to unlimited battery autonomy. The floor is left clean and perfectly dry, without any risk of slip fall accidents on wet floor or stumbling upon the cable. Li-Ion technology allows quick charging as well as intermediate charging which increases the flexibility of use of machine significantly.
Easy cleaning of confined areas
With the unique low height brush unit, the TASKI swingo 150 B
Li-Ion allows quick and easy access under furniture. The machine is
very light weight and can easily be transported, where conventional
automatic scrubber driers are simply too heavy and manual cleaning
methods do not deliver the required hygienic results.
Best cleaning results and immediately dry floors
High mechanical scrubbing action and a pressure ten times higher
compared to manual cleaning ensure best cleaning results.
The industry-leading suction unit results in perfectly dry floors –
in both directions. Cleaned areas can be used immediately, and safety
is improved by reducing the risk of slip-fall accidents.
Easy storage
With very compact dimensions, the taski swingo 150 B Li-Ion is easy
to store and will fit in the smallest of spaces. Comfortable handles
make it easy to lift and transport up stairs.
Working width 33.5 cm
Machine weight empty w/o battery 11.9 kg
Squeegee width 35.5 cm
Machine weight with battery 13.1 kg
Solution tank 2.9 L
Dimensions (L x W x H) 43 x 38 x 112 cm
Recovery tank 2.9 L
Sound pressure level 74 dB(A)
Nominal consumption 520 W
Battery autonomy 20 minutes
Rated voltage 36 V
Charging time 1.5 hours
Brush rotation speed 1,700 r Interactive Service Guide
TASKI by Diversey SWINGO 150 Parts and Support
small battery powered scrubber drier for flexible use
key features
• highest flexibility due to exchangable li-ion battery
• easy cleaning of confined areas
• perfect cleaning results and immediately dry floors
• easy storage
highest flexibility due to li-ion technology
the battery driven small scrubber drier is designed for flexible use and perfectly suitable for quick cleaning / spot cleaning of reception areas, in washrooms, small shops and restaurants. the batteries last 20 minutes but can easily be replaced by the operator, which leads to unlimited battery autonomy. the floor is left clean and perfectly dry, without any risk of slip fall accidents on wet floor or stumbling upon the cable. li-ion technology allows quick charging as well as intermediate charging which increases the flexibility of use of machine significantly.
easy cleaning of confined areas
with the unique low height brush unit, the taski swingo 150 b
li-ion allows quick and easy access under furniture. the machine is
very light weight and can easily be transported, where conventional
automatic scrubber driers are simply too heavy and manual cleaning
methods do not deliver the required hygienic results.
best cleaning results and immediately dry floors
high mechanical scrubbing action and a pressure ten times higher
compared to manual cleaning ensure best cleaning results.
the industry-leading suction unit results in perfectly dry floors –
in both directions. cleaned areas can be used immediately, and safety
is improved by reducing the risk of slip-fall accidents.
easy storage
with very compact dimensions, the taski swingo 150 b li-ion is easy
to store and will fit in the smallest of spaces. comfortable handles
make it easy to lift and transport up stairs.
working width 33.5 cm
machine weight empty w/o battery 11.9 kg
squeegee width 35.5 cm
machine weight with battery 13.1 kg
solution tank 2.9 l
dimensions (l x w x h) 43 x 38 x 112 cm
recovery tank 2.9 l
sound pressure level 74 db(a)
nominal consumption 520 w
battery autonomy 20 minutes
rated voltage 36 v
charging time 1.5 hours
brush rotation speed 1,700 r
key features
• highest flexibility due to exchangable li-ion battery
• easy cleaning of confined areas
• perfect cleaning results and immediately dry floors
• easy storage
highest flexibility due to li-ion technology
the battery driven small scrubber drier is designed for flexible use and perfectly suitable for quick cleaning / spot cleaning of reception areas, in washrooms, small shops and restaurants. the batteries last 20 minutes but can easily be replaced by the operator, which leads to unlimited battery autonomy. the floor is left clean and perfectly dry, without any risk of slip fall accidents on wet floor or stumbling upon the cable. li-ion technology allows quick charging as well as intermediate charging which increases the flexibility of use of machine significantly.
easy cleaning of confined areas
with the unique low height brush unit, the taski swingo 150 b
li-ion allows quick and easy access under furniture. the machine is
very light weight and can easily be transported, where conventional
automatic scrubber driers are simply too heavy and manual cleaning
methods do not deliver the required hygienic results.
best cleaning results and immediately dry floors
high mechanical scrubbing action and a pressure ten times higher
compared to manual cleaning ensure best cleaning results.
the industry-leading suction unit results in perfectly dry floors –
in both directions. cleaned areas can be used immediately, and safety
is improved by reducing the risk of slip-fall accidents.
easy storage
with very compact dimensions, the taski swingo 150 b li-ion is easy
to store and will fit in the smallest of spaces. comfortable handles
make it easy to lift and transport up stairs.
working width 33.5 cm
machine weight empty w/o battery 11.9 kg
squeegee width 35.5 cm
machine weight with battery 13.1 kg
solution tank 2.9 l
dimensions (l x w x h) 43 x 38 x 112 cm
recovery tank 2.9 l
sound pressure level 74 db(a)
nominal consumption 520 w
battery autonomy 20 minutes
rated voltage 36 v
charging time 1.5 hours
brush rotation speed 1,700 r
Parts
Can't find what you need? Click here or call 1-800-USA-CLEAN
In the market for a new machine? You can find quality new and reconditioned floor care equipment at one of our vendor partners:
Need a professional? We offer service both virtually and in person.
Learn more
Diagrams
- View all diagrams
- - Frequently Replaced Parts
- - Pad Holders
- -Know Your Machine
- -Simplified Electrical System
- -Simplified Recovery System
- -Simplified Solution System
- Handle Assembly
- Power Head Assembly
- Pump and Tank Assembly
- Vacuum Assembly
- Wiring Diagram - 120V
- Wiring Diagram - 240V
Manuals
Bulletins
- Distance Piece Charging Plug_2015
- Magnetic Valve_2018
- New Tank Latch_2013
- TASKI TSS Bulletin - Rating Plate Breakdown
Repair Guides
- Check belt assembly
- Check for power to the brush motor control board
- Check motor for locked up condition
- Check the brush height setting
- Check the brush motor
- Check the brush roll
- Check voltage output from brush motor control board
- Replace belt assembly
- Replace the brush motor
- Replace the brush motor
- Replace the brush motor control board
- Replace the Brush Roll
- Check control board outputs for power
- Check for power to the brush micro switch
- Check for power to the control board
- Check for power to the main switch
- Check for power to the pump and pressure switch
- Check for power to the solution switch
- Check for power to the vacuum motor
- Check for power to the vacuum switch
- Check the brush micro switch
- Check the main switch
- Check the power cord
- Check the pressure switch
- Check the solution switch
- Check the thermal protector
- Check the vacuum switch
- Check wiring and repair if necessary
- Check wiring to brush motor and repair if necessary
- Check wiring to main switch
- Check wiring to the control board and repair if necessary
- Check wiring to vacuum motor and repair if necessary
- Check wiring to vacuum switch and repair if necessary
- Repair wiring
- Repair wiring
- Replace the brush micro switch
- Replace the brush motor
- Replace the control board
- Replace the main switch
- Replace the Power Cord
- Replace the pressure switch
- Replace the pump
- Replace the solution switch
- Replace the thermal protector
- Replace the vacuum motor
- Replace the vacuum switch
- Check recovery cleanout for clogs
- Check the squeegee blades
- Check the tank float
- Check the vacuum hose
- Check the vacuum hose outlet connector for clogs
- Check vacuum motor inlet tube
- Empty the Tanks and Clean/Replace the Water Filter
- Replace the Exhaust Filter
- Replace the float
- Replace the Squeegee Blade Cartridges
- Replace the vacuum hose
- Replace the vacuum motor
- Check and clean the small foam filter
- Check solution supply hose and tee assembly
- Check the in-line filter
- Check the pump discharge hose assembly and clean if necessary
- Check the valve in the bottom of the tank
- Check the water channel cover ports for clogs and clean
- Check the water channel covers
- Replace the foam filter
- Replace the in-line filter
- Replace the pump discharge hose assembly
- Replace the solution supply hose and tee assembly
- Replace the water channel covers
- Replace valve assembly at the bottom of the tank