The Advance Sprite 16 consists of a powerful, yet quiet, 70 dB A, 1.3 hp 2 stage, by-pass motor, located under the tank for protection from water and debris. The tank holds 16 gallons and is constructed of rugged and corrosion-resistant polyethylene material. The tank conveniently pivots on a hinge to dump contents, or drain through a built-in hose. The entire tank lifts off for cleaning and allows total access for motor service or maintenance.
Sprite 16 picks up water faster than machines featuring a hose and wand, effectively cleaning—even in tight spots. The 24 inch front-mounted chemical resistant squeegee maneuvers right up to walls and into corners, picking up water and debris in both forward and reverse motion. A simple-to-use floor pedal raises or lowers the squeegee, making transport a snap. A float system stops recovery to prevent tank overflow.
For dry pick-up, insert a sock filter and use any of the dry pick-up accessories. A washable exhaust filter helps assure dust containment.
Get higher productivity, less mess, more even application, decreased operator fatigue and increased safety, with the Sprite 16 Pro. Designed for floor stripping applications, the Sprite 16 Pro adds the ultimate stripping tool to the versatile features of the Sprite 16, allowing users to efficiently lay down and then pick up stripper solution. The solution flows down to the floor via gravity and a stripper applicator tool ensures that it is applied evenly when the operator pulls the machine back. No power is required. Once the stripper is applied and scrubbed to loosen the floor finish, the squeegee tool replaces the stripping tool and the machine is simply plugged in and pushed forward to suck up the stripper/floor finish slurry and any rinse water used.
Motor: 1.3 hp, 115 V / 60 Hz, 2 stage
Air Flow: 91 ft3/min (2,577 L/min)
Sealed Waterlift: 88 in (223 cm)
Sound Level: 70 dB A
Construction: Roto-molded polyethylene tank
Tank Capacity: 16 gal (60 L) actual working
Squeegee Width: 24 in (61 cm), optional 30 in (76 cm)
Squeegee Pick-up Rate: 11,500 ft2/hr (1,068 m2/hr)
Power Cable: 50 ft (15 m) detachable
Wheels: 10 in x 1.75 in (25 cm x 4.5 cm) rear,4 in x 1 in (10 cm x 2.5 cm) front casters
Height (Dome): 35 in (89 cm)
Height (Handle): 39.5 in (100 cm)
Width: 17 in (43 cm)
Length: 40.5 in (103 cm)
Net Weight: 77 lb (35 kg)
Shipping Weight: 85 lb (39 kg)
Nilfisk-Advance SPRITE 16 NEW Parts and Support
The enhanced Advance Sprite® 16 is the wet/dry tank vacuum that cleans and saves. Saves money, that is. Don’t waste expensive time and labor on mops and buckets. For powerful, simple, quiet and efficient cleaning, put the Sprite 16 to work on your floors. New features include a clear cover to allow workers to see the water and chemical level in the tank, and a short pig-tail cord attaches to your 50 foot cable, eliminating the need to wrap a long cord around the machine between uses. Plus, the Advance Sprite® 16 Pro is available with the same impressive wet/dry vacuum capabilities along with a stripper dispensing tool and features designed to reduce the time it takes to strip floors.
The Advance Sprite 16 consists of a powerful, yet quiet, 70 dB A, 1.3 hp 2 stage, by-pass motor, located under the tank for protection from water and debris. The tank holds 16 gallons and is constructed of rugged and corrosion-resistant polyethylene material. The tank conveniently pivots on a hinge to dump contents, or drain through a built-in hose. The entire tank lifts off for cleaning and allows total access for motor service or maintenance.
Sprite 16 picks up water faster than machines featuring a hose and wand, effectively cleaning—even in tight spots. The 24 inch front-mounted chemical resistant squeegee maneuvers right up to walls and into corners, picking up water and debris in both forward and reverse motion. A simple-to-use floor pedal raises or lowers the squeegee, making transport a snap. A float system stops recovery to prevent tank overflow.
For dry pick-up, insert a sock filter and use any of the dry pick-up accessories. A washable exhaust filter helps assure dust containment.
Get higher productivity, less mess, more even application, decreased operator fatigue and increased safety, with the Sprite 16 Pro. Designed for floor stripping applications, the Sprite 16 Pro adds the ultimate stripping tool to the versatile features of the Sprite 16, allowing users to efficiently lay down and then pick up stripper solution. The solution flows down to the floor via gravity and a stripper applicator tool ensures that it is applied evenly when the operator pulls the machine back. No power is required. Once the stripper is applied and scrubbed to loosen the floor finish, the squeegee tool replaces the stripping tool and the machine is simply plugged in and pushed forward to suck up the stripper/floor finish slurry and any rinse water used.
Motor: 1.3 hp, 115 V / 60 Hz, 2 stage
Air Flow: 91 ft3/min (2,577 L/min)
Sealed Waterlift: 88 in (223 cm)
Sound Level: 70 dB A
Construction: Roto-molded polyethylene tank
Tank Capacity: 16 gal (60 L) actual working
Squeegee Width: 24 in (61 cm), optional 30 in (76 cm)
Squeegee Pick-up Rate: 11,500 ft2/hr (1,068 m2/hr)
Power Cable: 50 ft (15 m) detachable
Wheels: 10 in x 1.75 in (25 cm x 4.5 cm) rear,4 in x 1 in (10 cm x 2.5 cm) front casters
Height (Dome): 35 in (89 cm)
Height (Handle): 39.5 in (100 cm)
Width: 17 in (43 cm)
Length: 40.5 in (103 cm)
Net Weight: 77 lb (35 kg)
Shipping Weight: 85 lb (39 kg)
The Advance Sprite 16 consists of a powerful, yet quiet, 70 dB A, 1.3 hp 2 stage, by-pass motor, located under the tank for protection from water and debris. The tank holds 16 gallons and is constructed of rugged and corrosion-resistant polyethylene material. The tank conveniently pivots on a hinge to dump contents, or drain through a built-in hose. The entire tank lifts off for cleaning and allows total access for motor service or maintenance.
Sprite 16 picks up water faster than machines featuring a hose and wand, effectively cleaning—even in tight spots. The 24 inch front-mounted chemical resistant squeegee maneuvers right up to walls and into corners, picking up water and debris in both forward and reverse motion. A simple-to-use floor pedal raises or lowers the squeegee, making transport a snap. A float system stops recovery to prevent tank overflow.
For dry pick-up, insert a sock filter and use any of the dry pick-up accessories. A washable exhaust filter helps assure dust containment.
Get higher productivity, less mess, more even application, decreased operator fatigue and increased safety, with the Sprite 16 Pro. Designed for floor stripping applications, the Sprite 16 Pro adds the ultimate stripping tool to the versatile features of the Sprite 16, allowing users to efficiently lay down and then pick up stripper solution. The solution flows down to the floor via gravity and a stripper applicator tool ensures that it is applied evenly when the operator pulls the machine back. No power is required. Once the stripper is applied and scrubbed to loosen the floor finish, the squeegee tool replaces the stripping tool and the machine is simply plugged in and pushed forward to suck up the stripper/floor finish slurry and any rinse water used.
Motor: 1.3 hp, 115 V / 60 Hz, 2 stage
Air Flow: 91 ft3/min (2,577 L/min)
Sealed Waterlift: 88 in (223 cm)
Sound Level: 70 dB A
Construction: Roto-molded polyethylene tank
Tank Capacity: 16 gal (60 L) actual working
Squeegee Width: 24 in (61 cm), optional 30 in (76 cm)
Squeegee Pick-up Rate: 11,500 ft2/hr (1,068 m2/hr)
Power Cable: 50 ft (15 m) detachable
Wheels: 10 in x 1.75 in (25 cm x 4.5 cm) rear,4 in x 1 in (10 cm x 2.5 cm) front casters
Height (Dome): 35 in (89 cm)
Height (Handle): 39.5 in (100 cm)
Width: 17 in (43 cm)
Length: 40.5 in (103 cm)
Net Weight: 77 lb (35 kg)
Shipping Weight: 85 lb (39 kg)
Parts
Can't find what you need? Click here or call 1-800-USA-CLEAN
Need a professional? We offer in person service.
Learn more
