MICROMATIC 14E

MICROMATIC 14E

Nilfisk-Advance MICROMATIC 14E

Interested in purchasing equipment?

Contact our Experts!

Need help finding a part?

Ask our Team! Make the move from mops to the faster, more thorough cleaning method of automatic scrubbing with the Micromatic 14E. This machine applies cleaning solution, scrub the floor, and then picks up the dirty solution, all in one pass. Leaves floors clean and dry, ready for immediate traffic.

With the 14E, an operator will be able to clean 1,000-1,600 square feet(100-150 m2) per tankful. Compare that coverage with mop and bucket cleaning, and remember- that's for a thorough scrubbing, not just mopping floor.

It's compact enough to get into narrow aisles and congested areas, and is the most maneuverable automatic scrubber of its kind. Turns in its own length, and won't leave solution on the floor. The cylindrical scrub brush cleans a 14 inch (34 cm) wide path, and works on nearly any surface, including grouted tile, marble, raised tile, resilient tile, concrete and ceramic, to name a few. The unique shroud/squeegee head shifts sideways, for cleaning under furniture and around obstacles in either direction. Cleans right up to walls, and the squeegee system picks up in both forward and reverse.

The Micromatic 14E is cord-electric, so it's ready to operate when and as long as you are. Simple controls make it easy to operate, and comfortable design make it easy on the operator as well.

Rugged construction assures the dependable Micromatic will stay on the job, but service and maintenance are inevitable. That's why it's designed for easy access to modular components, so maintenance down time will be minimal.

Check it out, and ask for a demonstration. You'll find the Micromatic 14E is not only a thoroughly efficient cleaning machine, bu economical and affordable as well.

Vacuum Motor: 1.2 hp (900 W)
Vacuum Airflow: 95 ft3 /min (45 L/sec)
Waterlift: 96 in sealed (24 kPa)
Power Cable: 40 ft (12 m) long
Recovery Tank: 3.2 gal (12 L)
Solution Tank: 3 gal (11 L)
Solution Control: High/low pre-set positions (adjustable)
Brush Motor: 0.4 hp (320 W)
Brush Data: 4 in (10 cm) diameter cylindrical roller, nylon bristles
Brush Pressure: 35 lb (16 kg) max
Brush Speed: 1,000 rpm
Squeegee: 17 in (44 cm) curved, dual blades for forward/reverse pick up
Cleaning Width: 14 in (34 cm)
Cleaning Rates*: 14,400 ft2 /hr (1,360 m2) theoretical
Sound Level: 68 dB A
Controls: Master on/off switch for vacuum and brush motor, indicator lights (includes power on for
vacuum and brush motors.)
Length: 25 in (62 cm) w/handle folded over
Width: 17 in (44 cm)
Height: 19 in (48 cm) base, 41 in (105 cm) with handle upright
Weight: 90 lb (41 kg)

MICROMATIC 14E

Interested in purchasing equipment?

Contact our Experts

Need help finding a part?

Ask our Team!
Make the move from mops to the faster, more thorough cleaning method of automatic scrubbing with the Micromatic 14E. This machine applies cleaning solution, scrub the floor, and then picks up the dirty solution, all in one pass. Leaves floors clean and dry, ready for immediate traffic.

With the 14E, an operator will be able to clean 1,000-1,600 square feet(100-150 m2) per tankful. Compare that coverage with mop and bucket cleaning, and remember- that's for a thorough scrubbing, not just mopping floor.

It's compact enough to get into narrow aisles and congested areas, and is the most maneuverable automatic scrubber of its kind. Turns in its own length, and won't leave solution on the floor. The cylindrical scrub brush cleans a 14 inch (34 cm) wide path, and works on nearly any surface, including grouted tile, marble, raised tile, resilient tile, concrete and ceramic, to name a few. The unique shroud/squeegee head shifts sideways, for cleaning under furniture and around obstacles in either direction. Cleans right up to walls, and the squeegee system picks up in both forward and reverse.

The Micromatic 14E is cord-electric, so it's ready to operate when and as long as you are. Simple controls make it easy to operate, and comfortable design make it easy on the operator as well.

Rugged construction assures the dependable Micromatic will stay on the job, but service and maintenance are inevitable. That's why it's designed for easy access to modular components, so maintenance down time will be minimal.

Check it out, and ask for a demonstration. You'll find the Micromatic 14E is not only a thoroughly efficient cleaning machine, bu economical and affordable as well.

Vacuum Motor: 1.2 hp (900 W)
Vacuum Airflow: 95 ft3 /min (45 L/sec)
Waterlift: 96 in sealed (24 kPa)
Power Cable: 40 ft (12 m) long
Recovery Tank: 3.2 gal (12 L)
Solution Tank: 3 gal (11 L)
Solution Control: High/low pre-set positions (adjustable)
Brush Motor: 0.4 hp (320 W)
Brush Data: 4 in (10 cm) diameter cylindrical roller, nylon bristles
Brush Pressure: 35 lb (16 kg) max
Brush Speed: 1,000 rpm
Squeegee: 17 in (44 cm) curved, dual blades for forward/reverse pick up
Cleaning Width: 14 in (34 cm)
Cleaning Rates*: 14,400 ft2 /hr (1,360 m2) theoretical
Sound Level: 68 dB A
Controls: Master on/off switch for vacuum and brush motor, indicator lights (includes power on for
vacuum and brush motors.)
Length: 25 in (62 cm) w/handle folded over
Width: 17 in (44 cm)
Height: 19 in (48 cm) base, 41 in (105 cm) with handle upright
Weight: 90 lb (41 kg)

Nilfisk-Advance MICROMATIC 14E Parts and Support

Make the move from mops to the faster, more thorough cleaning method of automatic scrubbing with the Micromatic 14E. This machine applies cleaning solution, scrub the floor, and then picks up the dirty solution, all in one pass. Leaves floors clean and dry, ready for immediate traffic.

With the 14E, an operator will be able to clean 1,000-1,600 square feet(100-150 m2) per tankful. Compare that coverage with mop and bucket cleaning, and remember- that's for a thorough scrubbing, not just mopping floor.

It's compact enough to get into narrow aisles and congested areas, and is the most maneuverable automatic scrubber of its kind. Turns in its own length, and won't leave solution on the floor. The cylindrical scrub brush cleans a 14 inch (34 cm) wide path, and works on nearly any surface, including grouted tile, marble, raised tile, resilient tile, concrete and ceramic, to name a few. The unique shroud/squeegee head shifts sideways, for cleaning under furniture and around obstacles in either direction. Cleans right up to walls, and the squeegee system picks up in both forward and reverse.

The Micromatic 14E is cord-electric, so it's ready to operate when and as long as you are. Simple controls make it easy to operate, and comfortable design make it easy on the operator as well.

Rugged construction assures the dependable Micromatic will stay on the job, but service and maintenance are inevitable. That's why it's designed for easy access to modular components, so maintenance down time will be minimal.

Check it out, and ask for a demonstration. You'll find the Micromatic 14E is not only a thoroughly efficient cleaning machine, bu economical and affordable as well.

Vacuum Motor: 1.2 hp (900 W)
Vacuum Airflow: 95 ft3 /min (45 L/sec)
Waterlift: 96 in sealed (24 kPa)
Power Cable: 40 ft (12 m) long
Recovery Tank: 3.2 gal (12 L)
Solution Tank: 3 gal (11 L)
Solution Control: High/low pre-set positions (adjustable)
Brush Motor: 0.4 hp (320 W)
Brush Data: 4 in (10 cm) diameter cylindrical roller, nylon bristles
Brush Pressure: 35 lb (16 kg) max
Brush Speed: 1,000 rpm
Squeegee: 17 in (44 cm) curved, dual blades for forward/reverse pick up
Cleaning Width: 14 in (34 cm)
Cleaning Rates*: 14,400 ft2 /hr (1,360 m2) theoretical
Sound Level: 68 dB A
Controls: Master on/off switch for vacuum and brush motor, indicator lights (includes power on for
vacuum and brush motors.)
Length: 25 in (62 cm) w/handle folded over
Width: 17 in (44 cm)
Height: 19 in (48 cm) base, 41 in (105 cm) with handle upright
Weight: 90 lb (41 kg)

Parts

  • Product
  • Qty in Cart
  • Quantity
  • Price
  • Subtotal
  • OEM
    L08603005 - Shaft seal 172-0691

    Shaft seal 172-0691

    $13.22
    Specifications:Length: 2 in Width: 2 in Height: 2 in Matches:0860300534016156340161L08603005Fits on:Nilfisk-Advance MICROMATIC 14E
    $13.22
    Qty in Cart: 0
    Price:
    $13.22
    Subtotal:
  • OEM
    1467640000 - Ball bearing 272-6585

    Ball bearing 272-6585

    $23.01
    Matches:1467640000L08041900Fits on:Nilfisk-Advance MICROMATIC 14E
    $23.01
    Qty in Cart: 0
    Price:
    $23.01
    Subtotal:
  • OEM
    9097353000 - Squeegee blade kit 372-1621

    Squeegee blade kit 372-1621

    $143.09
    Specifications: FrontMatches:0860304208603044172-0707172-0708340066340067563400665634006786779810867798209.110-958.0909735300091109580L08603042L08603044Commonly purchased together:Fits on:Nilfisk-Advance MICROMATIC 14E
    $143.09
    Qty in Cart: 0
    Price:
    $143.09
    Subtotal:
  • OEM
    9099518000 - BLADE REAR KIT 572-3330

    BLADE REAR KIT (OBSOLETE) 572-3330

    Call for availability
    Matches:867605509099518000Commonly purchased together:May fit on these models - select model and diagram to confirmNilfisk-Advance MICROMATIC 14E
    $229.88
    Qty in Cart: 0
    Price:
    $229.88
    Subtotal:
  • OEM
    9100003008 - SQUEEGEE HOUSING REAR 572-3850

    SQUEEGEE HOUSING REAR 572-3850

    $98.38
    Matches:9100003008L08603038Fits on:Nilfisk-Advance MICROMATIC 14E
    $98.38
    Qty in Cart: 0
    Price:
    $98.38
    Subtotal:
  • OEM
    L08603137 - Ratchet Disc 172-0767

    Ratchet Disc 172-0767

    $12.31
    Matches:0860313734009056340090L08603137Fits on:Nilfisk-Advance MICROMATIC 14E
    $12.31
    Qty in Cart: 0
    Price:
    $12.31
    Subtotal:
  • OEM
    9095667000 - Switch kit 272-2708

    Switch kit 272-2708

    $12.31
    Matches:08603151172-0804181-0949272-2711325719563257198675707086897190909 5667 0009095667000L08603151L08812562Commonly purchased together:May fit on these models - select model and diagram to confirmKent (Nilfisk-Advance) RAZOR20BNilfisk-Advance...
    $12.31
    Qty in Cart: 0
    Price:
    $12.31
    Subtotal:
  • ships same day
    Non-OEM
     - 120V 2 stage vauum motor dual ball tangential 991-1240

    120V 2 stage vacuum motor dual ball tangential 991-1240

    $159.84
    This genuine Ametek-Lamb vacuum motor fits on the following models; Nilfisk Micromatic 14E, Windsor Compass II.Specifications:Weight: 7 poundsVoltage: 120Number of Stages: 2Discharge Type:...
    $159.84
    Qty in Cart: 0
    Price:
    $159.84
    Subtotal:
  • OEM
    9095668000 - Switch assembly 272-5306

    Switch assembly 272-5306

    $12.31
    Specifications:Weight: 0.35 poundsMatches:08603152172-080656340197909 5668 0009095668000May fit on these models - select model and diagram to confirmNilfisk-Advance MICROMATIC 14ENilfisk-Advance Terra 3700BClarke (Alto) RSW 37
    $12.31
    Qty in Cart: 0
    Price:
    $12.31
    Subtotal:
  • ships same day
    Non-OEM
     - 18/3 replacement power cord 50 foot (beige) 991-5008

    18/3 replacement power cord 50 foot (beige) 991-5008

    $43.29
    Specifications:Weight: 2.625 poundsGauge: 18/3Length: 50 FTType: PowerMatches:40295A995433DG7006045030678.613-933.086139330968968-BGC18P375BAlternative items:Below are other options that may meet your needs.18/3 replacement power cord 50 foot (black)$32...
    $43.29
    Qty in Cart: 0
    Price:
    $43.29
    Subtotal:
  • OEM
    L08603110 - Motor pre-filter 172-0738

    Motor pre-filter 172-0738

    $19.98
    Specifications:Weight: 0.05 poundsColor: BlackMaterial: FoamMatches:0860311034014856340148L08603110Commonly purchased together:Fits on:Nilfisk-Advance MICROMATIC 14E
    $19.98
    Qty in Cart: 0
    Price:
    $19.98
    Subtotal:
  • Total: items /

Adding your products to cart

Can't find what you need? Click here or call 1-800-USA-CLEAN
best live chat