Skip to main content

Nilfisk-Advance CARPETWIN 14 -OLD Parts and Support

CARPETWIN 14 -OLD

Shopping for Equipment?

Contact our Experts

Need help finding parts?

Ask our Team The CarpeTwin® 14 and 18 upright carpet vacuums clean a 14 or 18 inch (36 or 46cm) path, shaking loose and drawing out embedded dirt and grit that shorten carpet life.

Five-stage filtration on the CarpeTwin keeps dirt and dust under control. It begins with a two-ply 244 cubic inch (4 liter) paper filter/collector bag. (An optional cloth filter/collector bag is available.) The vac motor is filter protected so it will last longer. The final filter is a hospital grade filtration media. It protects your indoor air quality by filtering to 0.1 microns and exhausting only clean air.Sound insulation also keeps the CarpeTwin vacs hospital quiet, at only 69 dB A. With a two-motor design, separate motors drive the brush and the vacuum. The brush motor has electronic overcurrent protection, and a thermal relief valve protects the vacuum motor.

The 5,000 rpm chevron bristle brush is removable, and is motor-driven by a gear belt that won't slip or wear out.

Vacuum Motor: 1 hp, 115 V/60 Hz, 750 W, 2 stage, 88 cfm (2,492 L/min), 77 in (196 cm) sealed waterlift w/1.5 in (38 mm) orifice. Includes thermal overload protection. – BOTH MODELS
Brush Motor: Model 14 – 0.24 hp, 115 V/60 Hz, 180 W, Electronic overload protection on brush motors. – BOTH MODELS
Brush Speed: 5,000 rpm, driven by toothed timing belt.
Brush: Single row nylon bristles in a 360° chevron pattern, with variable brush height.
Total Power: Model 14 – 115 V/900 W, 8.3 amps
Cleaning Width: Model 14 – 14 in (36 cm)
Air Filtration: 5-stages, 2-ply paper filter bag, inlet foam filter, carbon brush exhaust filter, electrostatic exhaust filter. – BOTH MODELS
Bag Capacity: 2-ply filter bag has 244 in3 (4 L) capacity. – BOTH MODELS
Power Cable: 40 ft (12 m), 18/3 wire, double insulated. – BOTH MODELS
Sound Level: 69 dB A with both motors running. – BOTH MODELS
Weights: Net — 17.5 lb (7.9 kg)Shipping — 23 lb (10.4 kg)
Dimensions: Width (o/a) — 15 in (38 cm)Length — 10 in (25 cm)Height — 47 in (119 cm)

Nilfisk-Advance CARPETWIN 14 -OLD Parts and Support

CARPETWIN 14 -OLD

Shopping for Equipment?

Contact our Experts

Need help finding parts?

Ask our Team
The CarpeTwin® 14 and 18 upright carpet vacuums clean a 14 or 18 inch (36 or 46cm) path, shaking loose and drawing out embedded dirt and grit that shorten carpet life.

Five-stage filtration on the CarpeTwin keeps dirt and dust under control. It begins with a two-ply 244 cubic inch (4 liter) paper filter/collector bag. (An optional cloth filter/collector bag is available.) The vac motor is filter protected so it will last longer. The final filter is a hospital grade filtration media. It protects your indoor air quality by filtering to 0.1 microns and exhausting only clean air.Sound insulation also keeps the CarpeTwin vacs hospital quiet, at only 69 dB A. With a two-motor design, separate motors drive the brush and the vacuum. The brush motor has electronic overcurrent protection, and a thermal relief valve protects the vacuum motor.

The 5,000 rpm chevron bristle brush is removable, and is motor-driven by a gear belt that won't slip or wear out.

Vacuum Motor: 1 hp, 115 V/60 Hz, 750 W, 2 stage, 88 cfm (2,492 L/min), 77 in (196 cm) sealed waterlift w/1.5 in (38 mm) orifice. Includes thermal overload protection. – BOTH MODELS
Brush Motor: Model 14 – 0.24 hp, 115 V/60 Hz, 180 W, Electronic overload protection on brush motors. – BOTH MODELS
Brush Speed: 5,000 rpm, driven by toothed timing belt.
Brush: Single row nylon bristles in a 360° chevron pattern, with variable brush height.
Total Power: Model 14 – 115 V/900 W, 8.3 amps
Cleaning Width: Model 14 – 14 in (36 cm)
Air Filtration: 5-stages, 2-ply paper filter bag, inlet foam filter, carbon brush exhaust filter, electrostatic exhaust filter. – BOTH MODELS
Bag Capacity: 2-ply filter bag has 244 in3 (4 L) capacity. – BOTH MODELS
Power Cable: 40 ft (12 m), 18/3 wire, double insulated. – BOTH MODELS
Sound Level: 69 dB A with both motors running. – BOTH MODELS
Weights: Net — 17.5 lb (7.9 kg)Shipping — 23 lb (10.4 kg)
Dimensions: Width (o/a) — 15 in (38 cm)Length — 10 in (25 cm)Height — 47 in (119 cm)

Manuals & Diagrams
The CarpeTwin® 14 and 18 upright carpet vacuums clean a 14 or 18 inch (36 or 46cm) path, shaking loose and drawing out embedded dirt and grit that shorten carpet life.

Five-stage filtration on the CarpeTwin keeps dirt and dust under control. It begins with a two-ply 244 cubic inch (4 liter) paper filter/collector bag. (An optional cloth filter/collector bag is available.) The vac motor is filter protected so it will last longer. The final filter is a hospital grade filtration media. It protects your indoor air quality by filtering to 0.1 microns and exhausting only clean air.Sound insulation also keeps the CarpeTwin vacs hospital quiet, at only 69 dB A. With a two-motor design, separate motors drive the brush and the vacuum. The brush motor has electronic overcurrent protection, and a thermal relief valve protects the vacuum motor.

The 5,000 rpm chevron bristle brush is removable, and is motor-driven by a gear belt that won't slip or wear out.

Vacuum Motor: 1 hp, 115 V/60 Hz, 750 W, 2 stage, 88 cfm (2,492 L/min), 77 in (196 cm) sealed waterlift w/1.5 in (38 mm) orifice. Includes thermal overload protection. – BOTH MODELS
Brush Motor: Model 14 – 0.24 hp, 115 V/60 Hz, 180 W, Electronic overload protection on brush motors. – BOTH MODELS
Brush Speed: 5,000 rpm, driven by toothed timing belt.
Brush: Single row nylon bristles in a 360° chevron pattern, with variable brush height.
Total Power: Model 14 – 115 V/900 W, 8.3 amps
Cleaning Width: Model 14 – 14 in (36 cm)
Air Filtration: 5-stages, 2-ply paper filter bag, inlet foam filter, carbon brush exhaust filter, electrostatic exhaust filter. – BOTH MODELS
Bag Capacity: 2-ply filter bag has 244 in3 (4 L) capacity. – BOTH MODELS
Power Cable: 40 ft (12 m), 18/3 wire, double insulated. – BOTH MODELS
Sound Level: 69 dB A with both motors running. – BOTH MODELS
Weights: Net — 17.5 lb (7.9 kg)Shipping — 23 lb (10.4 kg)
Dimensions: Width (o/a) — 15 in (38 cm)Length — 10 in (25 cm)Height — 47 in (119 cm)

  • OEM
    56413817 - Rear roller 272-5743

    Rear roller 272-5743

    SKU: 272-5743
    $14.41
    Matches:5641381791033640Fits on:Nilfisk-Advance SC6500Nilfisk-Advance CONDOR 4030Nilfisk-Advance CARPETWIN 14 -OLDNilfisk-Advance CONDOR 4530Nilfisk-Advance CONDOR 4830
    $14.41
  • OEM
    56413419 - Belt 272-5734

    Belt 272-5734

    SKU: 272-5734
    $125.72
    Matches:5641341991025260Commonly purchased together:Fits on:Nilfisk-Advance CONDOR 4030Nilfisk-Advance CARPETWIN 14 -OLDNilfisk-Advance CONDOR 4530Nilfisk-Advance CONDOR 4830
    $125.72
  • OEM
    56414164 - Broom idler assembly 272-5723

    Broom idler assembly 272-5723

    SKU: 272-5723
    $329.16
    Matches:414164472-87755641326956414164May fit on these models - select model and diagram to confirmNilfisk-Advance SC6500Nilfisk-Advance CONDOR 4030Nilfisk-Advance CARPETWIN 14 -OLDNilfisk-Advance CONDOR 4530Nilfisk-Advance CONDOR 4830
    $329.16
  • OEM
    56111531 - Ball bearing 272-3931

    Ball bearing 272-3931

    SKU: 272-3931
    $58.17
    Matches:11153156111531May fit on these models - select model and diagram to confirmNilfisk-Advance ADGRESSOR 3820DNilfisk-Advance SC6500Nilfisk-Advance ADGRESSOR 3220DNilfisk-Advance CONDOR 4030Nilfisk-Advance ADGRESSOR 3520CNilfisk-Advance CONDOR...
    $58.17
  • ships same day
    OEM
    56601578 - Knob 172-9282

    Knob 172-9282

    SKU: 172-9282
    $15.17
    Specifications:Weight: 0.006 poundsMatches:407334564073345660157860157886700600Commonly purchased together:Fits on:Nilfisk-Advance Liberty SC60Nilfisk-Advance ADVENGER 2810DNilfisk-Advance ADVENGER 3210D-WMNilfisk-Advance ADVENGER 3210DNilfisk-Advance...
    $15.17
  • OEM
    56407006 - Roller wheel 172-9157

    Roller wheel 172-9157

    SKU: 172-9157
    $48.17
    Matches:40700656407006Commonly purchased together:May fit on these models - select model and diagram to confirmNilfisk-Advance Liberty SC60Nilfisk-Advance SC6500Nilfisk-Advance ADVENGER X2805Nilfisk-Advance ADVENGER 2805DNilfisk-Advance HYDRO...
    $48.17
  • ships same day
    OEM
    409538 - Terminal insulator 172-9147

    Terminal insulator 172-9147

    SKU: 172-9147
    $14.41
    Specifications:Length: 2 in Width: 1 in Height: 0.75 in Matches:40953856409538May fit on these models - select model and diagram to confirmNilfisk-Advance CONVERTAMATIC 26D-CNilfisk-Advance SC750Nilfisk-Advance AQUAPLUSNilfisk-Advance...
    $14.41
  • OEM
    Knob 572-9330

    Knob 572-9330

    SKU: 572-9330
    $13.32
    Matches:172-9281380149407114563801495640711486725880Commonly purchased together:May fit on these models - select model and diagram to confirmNilfisk-Advance Liberty SC60Nilfisk-Advance ADVENGER 2810DNilfisk-Advance ADVENGER 3210D-WMNilfisk-Advance...
    $13.32
  • OEM
    36V 200amp contactor 272-9761

    36V 200amp contactor 272-9761

    SKU: 272-9761
    $100.16
    Specifications:Type: ContactorMatches:56413516May fit on these models - select model and diagram to confirmNilfisk-Advance SC6500Nilfisk-Advance CONDOR 4030Nilfisk-Advance CARPETWIN 14 -OLDNilfisk-Advance CONDOR 4530Nilfisk-Advance CONDOR 4830
    $100.16
  • OEM
    Left hand guard assembly 272-9739

    Left hand guard assembly 272-9739

    SKU: 272-9739
    $288.88
    Matches:56413584May fit on these models - select model and diagram to confirmNilfisk-Advance CONDOR 4030Nilfisk-Advance CARPETWIN 14 -OLDNilfisk-Advance CONDOR 4530Nilfisk-Advance CONDOR 4830
    $288.88
  • OEM
    Right hand guard assembly 272-9738

    Right hand guard assembly 272-9738

    SKU: 272-9738
    $353.25
    Matches:56413578May fit on these models - select model and diagram to confirmNilfisk-Advance CONDOR 4030Nilfisk-Advance CARPETWIN 14 -OLDNilfisk-Advance CONDOR 4530Nilfisk-Advance CONDOR 4830
    $353.25
  • OEM
    Left hand skirt assembly 272-9737

    Left hand skirt assembly 272-9737

    SKU: 272-9737
    $529.45
    Matches:56413556May fit on these models - select model and diagram to confirmNilfisk-Advance SC6500Nilfisk-Advance CONDOR 4030Nilfisk-Advance CARPETWIN 14 -OLDNilfisk-Advance CONDOR 4530Nilfisk-Advance CONDOR 4830
    $529.45
  • OEM
    48 inch cylindrical scrub assembly 272-9736

    48 inch cylindrical scrub assembly 272-9736

    SKU: 272-9736
    $9,618.93
    Matches:56413792May fit on these models - select model and diagram to confirmNilfisk-Advance CONDOR 4030Nilfisk-Advance CARPETWIN 14 -OLDNilfisk-Advance CONDOR 4530Nilfisk-Advance CONDOR 4830
    $9,618.93
  • OEM
    45 inch cylindrical scrub assembly 272-9735

    45 inch cylindrical scrub assembly 272-9735

    SKU: 272-9735
    $10,100.20
    Matches:5641379091139530May fit on these models - select model and diagram to confirmNilfisk-Advance CONDOR 4030Nilfisk-Advance CARPETWIN 14 -OLDNilfisk-Advance CONDOR 4530Nilfisk-Advance CONDOR 4830
    $10,100.20
  • OEM
    40 inch cylindrical scrub assembly 272-9734

    40 inch cylindrical scrub assembly 272-9734

    SKU: 272-9734
    $9,298.25
    Matches:56413788May fit on these models - select model and diagram to confirmNilfisk-Advance CONDOR 4030Nilfisk-Advance CARPETWIN 14 -OLDNilfisk-Advance CONDOR 4530Nilfisk-Advance CONDOR 4830
    $9,298.25
  • OEM
    Rubber bumper 272-9688

    Rubber bumper 272-9688

    SKU: 272-9688
    $25.75
    Matches:56413714Fits on:Nilfisk-Advance SC6500Nilfisk-Advance CONDOR 4030Nilfisk-Advance CARPETWIN 14 -OLDNilfisk-Advance CONDOR 4530Nilfisk-Advance CONDOR 4830
    $25.75
  • OEM
    Right hand skirt assembly 272-7175

    Right hand skirt assembly 272-7175

    SKU: 272-7175
    $585.32
    Matches:4136095641360991023180May fit on these models - select model and diagram to confirmNilfisk-Advance SC6500Nilfisk-Advance CONDOR 4030Nilfisk-Advance CARPETWIN 14 -OLDNilfisk-Advance CONDOR 4530Nilfisk-Advance CONDOR 4830
    $585.32
  • OEM
    Left hand skirt assembly 272-7174

    Left hand skirt assembly 272-7174

    SKU: 272-7174
    $593.97
    Matches:4138715641387191023170Commonly purchased together:May fit on these models - select model and diagram to confirmNilfisk-Advance SC6500Nilfisk-Advance CONDOR 4030Nilfisk-Advance CARPETWIN 14 -OLDNilfisk-Advance CONDOR 4530Nilfisk-Advance CONDOR 4830
    $593.97
  • OEM
    Bearing 272-5778

    Bearing 272-5778

    SKU: 272-5778
    $34.23
    Matches:56380152Fits on:Nilfisk-Advance SC6500Nilfisk-Advance CONDOR 4030Nilfisk-Advance CARPETWIN 14 -OLDNilfisk-Advance CONDOR 4530Nilfisk-Advance CONDOR 4830
    $34.23
  • OEM
    Parallel arm 272-5776

    Parallel arm 272-5776

    SKU: 272-5776
    $40.44
    Matches:56380153Fits on:Nilfisk-Advance SC6500Nilfisk-Advance CONDOR 4030Nilfisk-Advance CARPETWIN 14 -OLDNilfisk-Advance CONDOR 4530Nilfisk-Advance CONDOR 4830
    $40.44
Can't find what you need? Click here or call 1-800-USA-CLEAN
best live chat