CARPETRIEVER 28DB

CARPETRIEVER 28DB

Nilfisk-Advance CARPETRIEVER 28DB

Designed for large carpeted areas, the Carpetriever 28 thoroughly vacuums a 28 inch (71 cm) path in one pass. No need for back and forth movement.

The Carpetriever maneuvers easily around obstacles. Its motorized carpet brush helps propel the machine, minimizing operator fatigue, and it adjusts to any carpet pile. The chevron bristle pattern draws dirt to the vacuum intake for efficient cleaning.

A 1/3 hp brush motor drives the carpet brush at 1,300 rpm for effective dirt and debris recovery. Squeeze-grips control the brush on/off.

The dual 1/8 hp vacuum motors provides generous pick-up power for thorough cleaning. Both motors are protected from dust by secondary filters, which remove easily for cleaning and inspection.

The standard cloth filter/collector bag on the Carpetriever is big, holding over 1 bushel (39.5 L), and giving more productive cleaning time. Paper bags are also available, and a hinged access door gives easy access to change or empty the bag.

Simple fingertip controls make operation easy, and a built-in hose and wand on the Carpetriever adds convenience for off the floor cleaning.

Vacuum motor: Two 1 1/8 hp, single-stage, 115 V/60 Hz
Brush motor: 1/3 hp, 115 V/60 Hz
Brush speed: 1,300 rpm
Brush: 25 1/4in (64 cm) long x 2 in (7 cm) diameter, w/nylon bristles in chevron pattern
Brush adjustments: Brush has 8 height settings for various carpet piles, and 2- positions to adjust for brush wear
Collector bag: 1 bushel (35 L) capacity. Cloth bag is standard, disposable paper bags are optionally available
Vacuum intake: 25 1/2 in (65 cm) wide opening
Noise level: 70 dB A at operators position
Built in hose/wand: 14 in( 36 cm) hose stretches to 56in (142 cm). Wand is 24 in (63 cm long)
Power cord: 75 ft(23 m) long, 14/3 wire. Yellow color for safety
Wheels: two 8 in (20 cm), non-marking rear wheels, two 2 in (5 cm) twin swivel front casters
Dimensions: Length- 41 in (104cm)/ Width-29.5 in (75 cm)/ Height- 38 in(96.5 cm)
Weight: Net- 111 lbs (50 kg)/ Shipping- 129 lb (58 kg)

CARPETRIEVER 28DB
Designed for large carpeted areas, the Carpetriever 28 thoroughly vacuums a 28 inch (71 cm) path in one pass. No need for back and forth movement.

The Carpetriever maneuvers easily around obstacles. Its motorized carpet brush helps propel the machine, minimizing operator fatigue, and it adjusts to any carpet pile. The chevron bristle pattern draws dirt to the vacuum intake for efficient cleaning.

A 1/3 hp brush motor drives the carpet brush at 1,300 rpm for effective dirt and debris recovery. Squeeze-grips control the brush on/off.

The dual 1/8 hp vacuum motors provides generous pick-up power for thorough cleaning. Both motors are protected from dust by secondary filters, which remove easily for cleaning and inspection.

The standard cloth filter/collector bag on the Carpetriever is big, holding over 1 bushel (39.5 L), and giving more productive cleaning time. Paper bags are also available, and a hinged access door gives easy access to change or empty the bag.

Simple fingertip controls make operation easy, and a built-in hose and wand on the Carpetriever adds convenience for off the floor cleaning.

Vacuum motor: Two 1 1/8 hp, single-stage, 115 V/60 Hz
Brush motor: 1/3 hp, 115 V/60 Hz
Brush speed: 1,300 rpm
Brush: 25 1/4in (64 cm) long x 2 in (7 cm) diameter, w/nylon bristles in chevron pattern
Brush adjustments: Brush has 8 height settings for various carpet piles, and 2- positions to adjust for brush wear
Collector bag: 1 bushel (35 L) capacity. Cloth bag is standard, disposable paper bags are optionally available
Vacuum intake: 25 1/2 in (65 cm) wide opening
Noise level: 70 dB A at operators position
Built in hose/wand: 14 in( 36 cm) hose stretches to 56in (142 cm). Wand is 24 in (63 cm long)
Power cord: 75 ft(23 m) long, 14/3 wire. Yellow color for safety
Wheels: two 8 in (20 cm), non-marking rear wheels, two 2 in (5 cm) twin swivel front casters
Dimensions: Length- 41 in (104cm)/ Width-29.5 in (75 cm)/ Height- 38 in(96.5 cm)
Weight: Net- 111 lbs (50 kg)/ Shipping- 129 lb (58 kg)

Nilfisk-Advance CARPETRIEVER 28DB Parts and Support

We're still adding parts for this model

Need help now? Just ask.

In the market for a new machine? You can find quality new and reconditioned floor care equipment at one of our vendor partners:
best live chat