AQUARIDE AXP

AQUARIDE AXP

Nilfisk-Advance AQUARIDE AXP

Interested in purchasing equipment?

Contact our Experts!

Need help finding a part?

Ask our Team! If you’re using two walk-behind machines to vacuum and extract the
same carpet, then consider the time-saving versatility of the Advance
AquaRide® AXP™ rider sweeper/extractor. As the industry’s first rider
extractor, it sweeps and extracts carpets at the same time, increasing
productivity while reducing operator fatigue.

The compact AquaRide extractor will sweep and extract 18,500
square feet of carpet in one pass in one hour... an impressive 400%
productivity gain over walk-behind extractors! The rider extractor
cleans a 28 inch wide path, yet is able to expertly maneuver through a
standard 36 inch doorway and turn within a 63 inch wide aisle. Dual
cylindrical rotating brushes sweep and clean both sides of the carpet,
leaving a well-groomed appearance. The AquaRide extractor features
dual-cleaning modes – a low-moisture mode for maintenance or
interim cleaning and a restoration mode for deep-cleaning.

Coverage Rate Low moisture mode – 18,500 ft2/hr (1,720 m2/hr)
Restoration mode – 8,000 ft2/hr (745 m2/hr)
Slow low moisture/Fast restoration 10,000 ft2/hr (930 m2/hr)
Solution Tank 45 gal (170 L) capacity. Rotationally molded polyethylene with drain hose.
Recovery Bladder 25 gal (95 L) capacity. PVC material, equipped with float ball screen and a 36 in (91 cm), long 1.5 in (3.8 cm) diameter drain hose
Waterlift 72 in (183 cm)
Brush Speed 900 rpm
Brush Length 28 in (71 cm)
Vacuum Shoes 2 - 15.5 in (39 cm) self-leveling, stainless steel
Brush System 2 motors at 0.75 hp, 560 watts each
Solution Pump Low moisture mode – 0.5 gpm (1.9 L/min) at 100 psi
Restoration mode – 1.1 gpm (4.1 L/min) at 100 psi
Vacuum Motor Two 1.0 hp, three-stage bypass, in parallel
Drive System 0.80 hp, 600 W motor with gear transmission, band brake and dynamic braking.
Power Source Six 6 V / 238 Ah batteries or Six 6 V / 305 Ah (@ 20 hour rate) batteries
Sound Level 73 dB A @ operator position.
Transport Speed 4.2 ft/min (1.3 m/min)
Construction Frame and scrub deck are 10 gauge steel which is zinc plated and epoxy powder coated.
All components that come in contact with water are stainless steel.
Dimensions Length – 60 in (152 cm)
Height – 51 in (130 cm)
Width – 31 in (79 cm)
Weight Net – 625 lb (283 kg) without batteries
Net – 1,165 lb (528 kg) with batteries
Shipping – 1,433 lb (649 kg) with batteries and charger

AQUARIDE AXP

Interested in purchasing equipment?

Contact our Experts

Need help finding a part?

Ask our Team!
If you’re using two walk-behind machines to vacuum and extract the
same carpet, then consider the time-saving versatility of the Advance
AquaRide® AXP™ rider sweeper/extractor. As the industry’s first rider
extractor, it sweeps and extracts carpets at the same time, increasing
productivity while reducing operator fatigue.

The compact AquaRide extractor will sweep and extract 18,500
square feet of carpet in one pass in one hour... an impressive 400%
productivity gain over walk-behind extractors! The rider extractor
cleans a 28 inch wide path, yet is able to expertly maneuver through a
standard 36 inch doorway and turn within a 63 inch wide aisle. Dual
cylindrical rotating brushes sweep and clean both sides of the carpet,
leaving a well-groomed appearance. The AquaRide extractor features
dual-cleaning modes – a low-moisture mode for maintenance or
interim cleaning and a restoration mode for deep-cleaning.

Coverage Rate Low moisture mode – 18,500 ft2/hr (1,720 m2/hr)
Restoration mode – 8,000 ft2/hr (745 m2/hr)
Slow low moisture/Fast restoration 10,000 ft2/hr (930 m2/hr)
Solution Tank 45 gal (170 L) capacity. Rotationally molded polyethylene with drain hose.
Recovery Bladder 25 gal (95 L) capacity. PVC material, equipped with float ball screen and a 36 in (91 cm), long 1.5 in (3.8 cm) diameter drain hose
Waterlift 72 in (183 cm)
Brush Speed 900 rpm
Brush Length 28 in (71 cm)
Vacuum Shoes 2 - 15.5 in (39 cm) self-leveling, stainless steel
Brush System 2 motors at 0.75 hp, 560 watts each
Solution Pump Low moisture mode – 0.5 gpm (1.9 L/min) at 100 psi
Restoration mode – 1.1 gpm (4.1 L/min) at 100 psi
Vacuum Motor Two 1.0 hp, three-stage bypass, in parallel
Drive System 0.80 hp, 600 W motor with gear transmission, band brake and dynamic braking.
Power Source Six 6 V / 238 Ah batteries or Six 6 V / 305 Ah (@ 20 hour rate) batteries
Sound Level 73 dB A @ operator position.
Transport Speed 4.2 ft/min (1.3 m/min)
Construction Frame and scrub deck are 10 gauge steel which is zinc plated and epoxy powder coated.
All components that come in contact with water are stainless steel.
Dimensions Length – 60 in (152 cm)
Height – 51 in (130 cm)
Width – 31 in (79 cm)
Weight Net – 625 lb (283 kg) without batteries
Net – 1,165 lb (528 kg) with batteries
Shipping – 1,433 lb (649 kg) with batteries and charger

Nilfisk-Advance AQUARIDE AXP Parts and Support

If you’re using two walk-behind machines to vacuum and extract the
same carpet, then consider the time-saving versatility of the Advance
AquaRide® AXP™ rider sweeper/extractor. As the industry’s first rider
extractor, it sweeps and extracts carpets at the same time, increasing
productivity while reducing operator fatigue.

The compact AquaRide extractor will sweep and extract 18,500
square feet of carpet in one pass in one hour... an impressive 400%
productivity gain over walk-behind extractors! The rider extractor
cleans a 28 inch wide path, yet is able to expertly maneuver through a
standard 36 inch doorway and turn within a 63 inch wide aisle. Dual
cylindrical rotating brushes sweep and clean both sides of the carpet,
leaving a well-groomed appearance. The AquaRide extractor features
dual-cleaning modes – a low-moisture mode for maintenance or
interim cleaning and a restoration mode for deep-cleaning.

Coverage Rate Low moisture mode – 18,500 ft2/hr (1,720 m2/hr)
Restoration mode – 8,000 ft2/hr (745 m2/hr)
Slow low moisture/Fast restoration 10,000 ft2/hr (930 m2/hr)
Solution Tank 45 gal (170 L) capacity. Rotationally molded polyethylene with drain hose.
Recovery Bladder 25 gal (95 L) capacity. PVC material, equipped with float ball screen and a 36 in (91 cm), long 1.5 in (3.8 cm) diameter drain hose
Waterlift 72 in (183 cm)
Brush Speed 900 rpm
Brush Length 28 in (71 cm)
Vacuum Shoes 2 - 15.5 in (39 cm) self-leveling, stainless steel
Brush System 2 motors at 0.75 hp, 560 watts each
Solution Pump Low moisture mode – 0.5 gpm (1.9 L/min) at 100 psi
Restoration mode – 1.1 gpm (4.1 L/min) at 100 psi
Vacuum Motor Two 1.0 hp, three-stage bypass, in parallel
Drive System 0.80 hp, 600 W motor with gear transmission, band brake and dynamic braking.
Power Source Six 6 V / 238 Ah batteries or Six 6 V / 305 Ah (@ 20 hour rate) batteries
Sound Level 73 dB A @ operator position.
Transport Speed 4.2 ft/min (1.3 m/min)
Construction Frame and scrub deck are 10 gauge steel which is zinc plated and epoxy powder coated.
All components that come in contact with water are stainless steel.
Dimensions Length – 60 in (152 cm)
Height – 51 in (130 cm)
Width – 31 in (79 cm)
Weight Net – 625 lb (283 kg) without batteries
Net – 1,165 lb (528 kg) with batteries
Shipping – 1,433 lb (649 kg) with batteries and charger

Parts

  • Product
  • Qty in Cart
  • Quantity
  • Price
  • Subtotal
  • OEM
    391690 - Float ball 172-0192

    Float ball 172-0192

    $10.52
    Specifications:Weight: 0.012 poundsMatches:08812373170-9085225-0093272-546439169056391690572-34449100000817L08812373Commonly purchased together:May fit on these models - select model and diagram to confirmNilfisk-Advance AQUACLEAN 18FLXClarke (Alto)...
    $10.52
    Qty in Cart: 0
    Price:
    $10.52
    Subtotal:
  • OEM
    316110 - Control assembly 272-9955

    Control assembly 272-9955

    $827.58
    $827.58
    Qty in Cart: 0
    Price:
    $827.58
    Subtotal:
  • OEM
    56413664 - Rod 272-9482

    Rod 272-9482

    $12.31
    $12.31
    Qty in Cart: 0
    Price:
    $12.31
    Subtotal:
  • OEM
    040958 - CRI tag 272-9325

    CRI tag 272-9325

    $12.31
    $12.31
    Qty in Cart: 0
    Price:
    $12.31
    Subtotal:
  • OEM
    397228 - 36V 3 stage vacuum motor 272-9272

    36V 3 stage vacuum motor 272-9272

    $298.77
    Looking for a cheaper option? Check out our genuine Ametek-Lamb replacement vacuum motor, part number 991-1237.Specifications:Weight: 7 poundsMatches:172-282139722856397228Alternative items:Below are other options that may meet your needs.VAC MOTOR ASM,...
    $298.77
    Qty in Cart: 0
    Price:
    $298.77
    Subtotal:
  • OEM
    395455 - 36V 100amp contactor 272-8184

    36V 100amp contactor 272-8184

    $55.56
    Specifications:Weight: 1.06 poundsType: ContactorMatches:3954555639545586756860Commonly purchased together:May fit on these models - select model and diagram to confirmNilfisk-Advance WARRIOR 34RSTNilfisk-Advance WARRIOR 32DNilfisk-Advance...
    $55.56
    Qty in Cart: 0
    Price:
    $55.56
    Subtotal:
  • OEM
    413846 - Gasket strip 272-6565

    Gasket strip 272-6565

    $12.31
    Matches:172-3339314103413846563141035641384686753120Commonly purchased together:Fits on:Nilfisk-Advance ADVENGER 2810DNilfisk-Advance ADVENGER 3210D-WMNilfisk-Advance ADVENGER 3210DNilfisk-Advance ADGRESSOR 3820DNilfisk-Advance AQUA RIDE...
    $12.31
    Qty in Cart: 0
    Price:
    $12.31
    Subtotal:
  • Total: items /

Adding your products to cart

Can't find what you need? Click here or call 1-800-USA-CLEAN
best live chat