The compact and versatile PowerBoss SCV 28/32 rider scrubber is packed with power. Maneuvering through tight spaces with ease, the SCV 28/32 cleans 40,500 to 44,000 sq. ft. per hour while the operator rides in complete comfort. The SCV 28/32 features a single front wheel drive that provides optimum traction and allows it to turn 360 degrees on its own axis for on-the-spot maneuverability. Standard dual headlights and backup alerts insure visibility and safety for the operator and bystanders.
On Board Off-Aisle Wand and Squeegee Tool
The SCV 28/32 comes standard with an on board off-aisle wand and squeegee tool ideal for cleaning areas where the machine cannot go. The telescopic wand adjusts for operator comfort. Compact and lightweight, the tool is conveniently attached to the rear of the machine and always available for use. A simple flip of the vacuum diversion lever (holds the tool when not in use) and activation of the rocker switch turns on the power to the tool.
The SCV™28/32 control panel consists of an easy to read, five position switch. This five position switch controls various functions for:
- Full function heavy brush pressure
- Full function regular brush pressure
- Double-scrub
- Vacuum only
- Transport mode
The control panel is also equipped with an LED battery indicator. Other easy to reach controls include the horn button, forward/reverse switch and On/Off key power switch.
• Five position control panel
• Four interchangeable scrub decks on one chassis
• Tilt steering and dual side entry
• See-thru solution tank lid
• Cup holder
• Removable debris box on cylindrical scrub deck
• Three electronic brakes for safety: E-mag, Dynamic, Plugging
• Fully variable solution flow rate
• Spray jets for cylindrical scrub deck insures uniform solution distribution on floor
• Two caster wheel adjustment insures proper squeegee alignment
• See thru vacuum motor cap for visual filter inspection
Scrub Path (4 to choose from) 28" (71cm) cylindrical or rotary disc
Squeegee Width: SCV28: 30½" rigid + soft ends = 33"(84cm) total squeegee length
Scrub Brushes SCV28: (2) 14" (35.5cm) Disc or (2) 27¼" (69cm) offset Cylindrical
Squeegee (Rear) Curved, 4-sided, break-away, caster-guide, swing-type, no tools needed to change assembly or blades
Squeegee (Side) Linatex blade attached to scrub deck to contain solution and direct flow to rear
Brush Pressure Regular and heavy
Brush Motor and Brush
RPM
Disc brush head: SCV28: 1.5 HP dual right angle with Gearbox, 300 RPM
Scrub Speed Variable and programmable
Linear Speed 0-4 MPH
Vacuum Motor 1 HP, 3-Stage tangential bypass
Solution Tank Capacity 32 gallon (121 liters)
Recovery Tank Capacity 38 gallon (144 liters)
Dimensions (LxWxH) 63" x 30" x 54" (160cm x 76cm x 137cm)
Weight 1,242 lbs. (563kg) with batteries
822 lbs. (373kg) without batteries
Wheels (Front) 3½" x 12" solid w/cross hatch (9cm x 30cm)
Wheels (Rear) 4" x 14" soft ride (10cm x 36cm) cross hatch non-marking gray
Drive Motor 1.2 HP traction drive with e-mag brake
Batteries (6) 6 volt, 275AH
Minuteman POWERBOSS SCV28 Parts and Support
Compact, Agile Performance
The compact and versatile PowerBoss SCV 28/32 rider scrubber is packed with power. Maneuvering through tight spaces with ease, the SCV 28/32 cleans 40,500 to 44,000 sq. ft. per hour while the operator rides in complete comfort. The SCV 28/32 features a single front wheel drive that provides optimum traction and allows it to turn 360 degrees on its own axis for on-the-spot maneuverability. Standard dual headlights and backup alerts insure visibility and safety for the operator and bystanders.
On Board Off-Aisle Wand and Squeegee Tool
The SCV 28/32 comes standard with an on board off-aisle wand and squeegee tool ideal for cleaning areas where the machine cannot go. The telescopic wand adjusts for operator comfort. Compact and lightweight, the tool is conveniently attached to the rear of the machine and always available for use. A simple flip of the vacuum diversion lever (holds the tool when not in use) and activation of the rocker switch turns on the power to the tool.
The SCV™28/32 control panel consists of an easy to read, five position switch. This five position switch controls various functions for:
- Full function heavy brush pressure
- Full function regular brush pressure
- Double-scrub
- Vacuum only
- Transport mode
The control panel is also equipped with an LED battery indicator. Other easy to reach controls include the horn button, forward/reverse switch and On/Off key power switch.
• Five position control panel
• Four interchangeable scrub decks on one chassis
• Tilt steering and dual side entry
• See-thru solution tank lid
• Cup holder
• Removable debris box on cylindrical scrub deck
• Three electronic brakes for safety: E-mag, Dynamic, Plugging
• Fully variable solution flow rate
• Spray jets for cylindrical scrub deck insures uniform solution distribution on floor
• Two caster wheel adjustment insures proper squeegee alignment
• See thru vacuum motor cap for visual filter inspection
Scrub Path (4 to choose from) 28" (71cm) cylindrical or rotary disc
Squeegee Width: SCV28: 30½" rigid + soft ends = 33"(84cm) total squeegee length
Scrub Brushes SCV28: (2) 14" (35.5cm) Disc or (2) 27¼" (69cm) offset Cylindrical
Squeegee (Rear) Curved, 4-sided, break-away, caster-guide, swing-type, no tools needed to change assembly or blades
Squeegee (Side) Linatex blade attached to scrub deck to contain solution and direct flow to rear
Brush Pressure Regular and heavy
Brush Motor and Brush
RPM
Disc brush head: SCV28: 1.5 HP dual right angle with Gearbox, 300 RPM
Scrub Speed Variable and programmable
Linear Speed 0-4 MPH
Vacuum Motor 1 HP, 3-Stage tangential bypass
Solution Tank Capacity 32 gallon (121 liters)
Recovery Tank Capacity 38 gallon (144 liters)
Dimensions (LxWxH) 63" x 30" x 54" (160cm x 76cm x 137cm)
Weight 1,242 lbs. (563kg) with batteries
822 lbs. (373kg) without batteries
Wheels (Front) 3½" x 12" solid w/cross hatch (9cm x 30cm)
Wheels (Rear) 4" x 14" soft ride (10cm x 36cm) cross hatch non-marking gray
Drive Motor 1.2 HP traction drive with e-mag brake
Batteries (6) 6 volt, 275AH
The compact and versatile PowerBoss SCV 28/32 rider scrubber is packed with power. Maneuvering through tight spaces with ease, the SCV 28/32 cleans 40,500 to 44,000 sq. ft. per hour while the operator rides in complete comfort. The SCV 28/32 features a single front wheel drive that provides optimum traction and allows it to turn 360 degrees on its own axis for on-the-spot maneuverability. Standard dual headlights and backup alerts insure visibility and safety for the operator and bystanders.
On Board Off-Aisle Wand and Squeegee Tool
The SCV 28/32 comes standard with an on board off-aisle wand and squeegee tool ideal for cleaning areas where the machine cannot go. The telescopic wand adjusts for operator comfort. Compact and lightweight, the tool is conveniently attached to the rear of the machine and always available for use. A simple flip of the vacuum diversion lever (holds the tool when not in use) and activation of the rocker switch turns on the power to the tool.
The SCV™28/32 control panel consists of an easy to read, five position switch. This five position switch controls various functions for:
- Full function heavy brush pressure
- Full function regular brush pressure
- Double-scrub
- Vacuum only
- Transport mode
The control panel is also equipped with an LED battery indicator. Other easy to reach controls include the horn button, forward/reverse switch and On/Off key power switch.
• Five position control panel
• Four interchangeable scrub decks on one chassis
• Tilt steering and dual side entry
• See-thru solution tank lid
• Cup holder
• Removable debris box on cylindrical scrub deck
• Three electronic brakes for safety: E-mag, Dynamic, Plugging
• Fully variable solution flow rate
• Spray jets for cylindrical scrub deck insures uniform solution distribution on floor
• Two caster wheel adjustment insures proper squeegee alignment
• See thru vacuum motor cap for visual filter inspection
Scrub Path (4 to choose from) 28" (71cm) cylindrical or rotary disc
Squeegee Width: SCV28: 30½" rigid + soft ends = 33"(84cm) total squeegee length
Scrub Brushes SCV28: (2) 14" (35.5cm) Disc or (2) 27¼" (69cm) offset Cylindrical
Squeegee (Rear) Curved, 4-sided, break-away, caster-guide, swing-type, no tools needed to change assembly or blades
Squeegee (Side) Linatex blade attached to scrub deck to contain solution and direct flow to rear
Brush Pressure Regular and heavy
Brush Motor and Brush
RPM
Disc brush head: SCV28: 1.5 HP dual right angle with Gearbox, 300 RPM
Scrub Speed Variable and programmable
Linear Speed 0-4 MPH
Vacuum Motor 1 HP, 3-Stage tangential bypass
Solution Tank Capacity 32 gallon (121 liters)
Recovery Tank Capacity 38 gallon (144 liters)
Dimensions (LxWxH) 63" x 30" x 54" (160cm x 76cm x 137cm)
Weight 1,242 lbs. (563kg) with batteries
822 lbs. (373kg) without batteries
Wheels (Front) 3½" x 12" solid w/cross hatch (9cm x 30cm)
Wheels (Rear) 4" x 14" soft ride (10cm x 36cm) cross hatch non-marking gray
Drive Motor 1.2 HP traction drive with e-mag brake
Batteries (6) 6 volt, 275AH
Parts
Can't find what you need? Click here or call 1-800-USA-CLEAN
Need a professional? We offer in person service.
Learn more
Diagrams
- View all diagrams
- - Commonly Asked For Parts
- - Pad Holders
- Battery Box Assembly
- Console Assembly
- Cylindrical Scrub Deck Assembly 28 inch
- Disc Scrub Deck Assembly 28 inch
- Diverter Assembly
- Electrical Panel Assembly
- Front Drive Assembly
- LCD Housing Assembly
- Left Side Scrub Deck Assembly - Cylindrical
- Left Side Scrub Deck Assembly - Disk
- Main Assembly 1
- Main Assembly 2
- Main Frame Assembly 1
- Main Frame Assembly 2
- Plumbing Diagram
- Pump Assembly
- Rear Axle Assembly
- Rear Squeegee Assembly 28 inch
- Recovery Tank Assembly 1
- Recovery Tank Assembly 2
- Right Side Scrub Deck Assembly - Cylindrical
- Right Side Scrub Deck Assembly - Disk
- Scrub Deck and Roller Bumper Mounting Assembly - Cylindrical
- Scrub Deck and Roller Bumper Mounting Assembly - Disk
- Solution Tank Assembly
- Squeegee Lift Assembly
- Squeegee Mechanism Assembly
- Steering Assembly
- Wiring Diagram 1
- Wiring Diagram 2
- Wiring Diagram 3