Brush assisted forward/reverse action allows for the extractor to clean carpet fibers in "both" directions for more effective cleaning while reducing labor time and effort.
Features
Trigger Lever
Squeeze the trigger to operate in reverse.
Control Switches
Located at operators finger tips, clearly illustrate and sealed to protect against moisture.
25 Ft Power Cord
Wraps around, quick release cord holder on back of handle for storage.
See-Thru Dome
Allow for constant monitoring of the extractors cleaning effectiveness.
Shared 8 Gal Chamber Solution/Recovery System
Holds solution in a bladder and it is pumped out for the cleaning operation. As the bladder empties dirty solution is vacuumed up and recovered in the commonly shared tank.
Kick Stand
Lifts brush off the floor to protect it when not in use.
2 Sets of 2 Spray Nozzles
Operate independently, spraying ahead of the
brush when cleaning in either direction. Solution volume can be adjusted using a directional valve.
Vacuum Shoes
Provide continuous forward and reverse suction recovering dirty solution in either direction.
Cleaning Path: 14” w/2 Forward and 2 Reverse Spray Jets
Vacuum Motor: 120Volt, 1.9 HP - 112 CFM
Waterlift 106”
Brush Motor: 0.5 HP; 2.3 AMPS
Brush Speed: 675 RPM
Water Output: 1.8 GPM (Adjustable)
Pump Pressure: 100 PSI
Capacity Shared: 8 Gallon Solution and Recovery
Power Cord: 25 Ft, 3 Wire Grounded, Plus 25 Ft Extension Cord
Mastercraft MX-1408 Parts and Support
mx-1408 extractor is compact and easy to operate. there are no external solution lines, hoses or separate wand to deal with, they are self-contained. it is excellent for cleaning carpeted areas in hotels, offices, stores, restaurants, and many other facilities.
brush assisted forward/reverse action allows for the extractor to clean carpet fibers in "both" directions for more effective cleaning while reducing labor time and effort.
features
trigger lever
squeeze the trigger to operate in reverse.
control switches
located at operators finger tips, clearly illustrate and sealed to protect against moisture.
25 ft power cord
wraps around, quick release cord holder on back of handle for storage.
see-thru dome
allow for constant monitoring of the extractors cleaning effectiveness.
shared 8 gal chamber solution/recovery system
holds solution in a bladder and it is pumped out for the cleaning operation. as the bladder empties dirty solution is vacuumed up and recovered in the commonly shared tank.
kick stand
lifts brush off the floor to protect it when not in use.
2 sets of 2 spray nozzles
operate independently, spraying ahead of the
brush when cleaning in either direction. solution volume can be adjusted using a directional valve.
vacuum shoes
provide continuous forward and reverse suction recovering dirty solution in either direction.
cleaning path: 14” w/2 forward and 2 reverse spray jets
vacuum motor: 120volt, 1.9 hp - 112 cfm
waterlift 106”
brush motor: 0.5 hp; 2.3 amps
brush speed: 675 rpm
water output: 1.8 gpm (adjustable)
pump pressure: 100 psi
capacity shared: 8 gallon solution and recovery
power cord: 25 ft, 3 wire grounded, plus 25 ft extension cord
brush assisted forward/reverse action allows for the extractor to clean carpet fibers in "both" directions for more effective cleaning while reducing labor time and effort.
features
trigger lever
squeeze the trigger to operate in reverse.
control switches
located at operators finger tips, clearly illustrate and sealed to protect against moisture.
25 ft power cord
wraps around, quick release cord holder on back of handle for storage.
see-thru dome
allow for constant monitoring of the extractors cleaning effectiveness.
shared 8 gal chamber solution/recovery system
holds solution in a bladder and it is pumped out for the cleaning operation. as the bladder empties dirty solution is vacuumed up and recovered in the commonly shared tank.
kick stand
lifts brush off the floor to protect it when not in use.
2 sets of 2 spray nozzles
operate independently, spraying ahead of the
brush when cleaning in either direction. solution volume can be adjusted using a directional valve.
vacuum shoes
provide continuous forward and reverse suction recovering dirty solution in either direction.
cleaning path: 14” w/2 forward and 2 reverse spray jets
vacuum motor: 120volt, 1.9 hp - 112 cfm
waterlift 106”
brush motor: 0.5 hp; 2.3 amps
brush speed: 675 rpm
water output: 1.8 gpm (adjustable)
pump pressure: 100 psi
capacity shared: 8 gallon solution and recovery
power cord: 25 ft, 3 wire grounded, plus 25 ft extension cord
Parts
Can't find what you need? Click here or call 1-800-USA-CLEAN
In the market for a new machine? You can find quality new and reconditioned floor care equipment at one of our vendor partners:
Need a professional? We offer service both virtually and in person.
Learn more