Rotomatic

Rotomatic

Escatechnique Rotomatic

Interested in purchasing equipment?

Contact our Experts!

Need help finding a part?

Ask our Team! The Rotomatic escalator cleaner contains 15 rotating brushes consisting of 4 different lengths and materials to scrub and sweep dirt into the machine and off the steps, with an added time setting to help maintain the escalators, The Rotomatic now has a self-cleaning mode which will help save time and money to keep the machine clean and maintained to high standard. The brushes are an effective and safe way to clean the step and do not damage the treads. The new illuminated panel is built to sustain substantial usage and common misuse. The machine is still mains operated. A new socket has been included that enables the T10 attachment to be connected to perform quick maintenance cleans or using Rotomatic-T10 combo as travellator cleaning device.

The Rotomatic escalator cleaning machine is easily transported on its trolley sits stationary on a still escalator. It sprays a fine mist of solution on to the step and the 15 rotating brushes deep clean and sweep all dirt into the vac and then into the recovery tank. There are 4 especially chosen brushes that do not damage aluminum or the painted surfaces however still remove tough dirt and grease.

The escalator surface is left clean and dry with no risk of contamination to lubricating oils in escalator drums or damage to electrical circuits. During the cleaning process the machine operator and there assistant removes all embedded foreign matter; which could damage the escalator combs and steps. An important aspect of this cleaning process is that all sand, dirt and spillage which would normally have combined with oil and grease to form a grinding paste in the escalator mechanism, are completely removed.

-Dramatic cost savings compared to conventional cleaning methods
-No need to remove the steps, cleaning done in-situ.
-Cleaning is undertaken on-site, after hours.
-Overnight cleaning ensuring the escalator is ready for traffic at the start of the day.
-The step and riser of the escalator are cleaned right to the edges in a single operation.
-Efficiently and effectively removes grease, spillage’s, stones, foreign objects, hardened sand and grinding paste (spillage combined with grease etc).
-Premises with clean escalators are more appealing, therefore attract more trade and develop a better reputation.
-Thoroughly cleaned escalators.
-No damage to escalators.
-No damage to electrical circuits and internal mechanisms.
-Controlled pre-set chemical and minimal water is sprayed through nozzles.
-Will not dilute the lubrication of the escalator mechanism.
-Immediate vacuuming of the dirty solution into holding tanks.
-Eliminates the danger of chains rusting, motors burning out, and damage to electrical circuits.
-Decreases escalator maintenance costs.
-Tested and officially endorsed by the world’s leading manufacturers.
-More efficient and cost effective than other methods.

Rotomatic

Interested in purchasing equipment?

Contact our Experts

Need help finding a part?

Ask our Team!
The Rotomatic escalator cleaner contains 15 rotating brushes consisting of 4 different lengths and materials to scrub and sweep dirt into the machine and off the steps, with an added time setting to help maintain the escalators, The Rotomatic now has a self-cleaning mode which will help save time and money to keep the machine clean and maintained to high standard. The brushes are an effective and safe way to clean the step and do not damage the treads. The new illuminated panel is built to sustain substantial usage and common misuse. The machine is still mains operated. A new socket has been included that enables the T10 attachment to be connected to perform quick maintenance cleans or using Rotomatic-T10 combo as travellator cleaning device.

The Rotomatic escalator cleaning machine is easily transported on its trolley sits stationary on a still escalator. It sprays a fine mist of solution on to the step and the 15 rotating brushes deep clean and sweep all dirt into the vac and then into the recovery tank. There are 4 especially chosen brushes that do not damage aluminum or the painted surfaces however still remove tough dirt and grease.

The escalator surface is left clean and dry with no risk of contamination to lubricating oils in escalator drums or damage to electrical circuits. During the cleaning process the machine operator and there assistant removes all embedded foreign matter; which could damage the escalator combs and steps. An important aspect of this cleaning process is that all sand, dirt and spillage which would normally have combined with oil and grease to form a grinding paste in the escalator mechanism, are completely removed.

-Dramatic cost savings compared to conventional cleaning methods
-No need to remove the steps, cleaning done in-situ.
-Cleaning is undertaken on-site, after hours.
-Overnight cleaning ensuring the escalator is ready for traffic at the start of the day.
-The step and riser of the escalator are cleaned right to the edges in a single operation.
-Efficiently and effectively removes grease, spillage’s, stones, foreign objects, hardened sand and grinding paste (spillage combined with grease etc).
-Premises with clean escalators are more appealing, therefore attract more trade and develop a better reputation.
-Thoroughly cleaned escalators.
-No damage to escalators.
-No damage to electrical circuits and internal mechanisms.
-Controlled pre-set chemical and minimal water is sprayed through nozzles.
-Will not dilute the lubrication of the escalator mechanism.
-Immediate vacuuming of the dirty solution into holding tanks.
-Eliminates the danger of chains rusting, motors burning out, and damage to electrical circuits.
-Decreases escalator maintenance costs.
-Tested and officially endorsed by the world’s leading manufacturers.
-More efficient and cost effective than other methods.

Escatechnique Rotomatic Parts and Support

The Rotomatic escalator cleaner contains 15 rotating brushes consisting of 4 different lengths and materials to scrub and sweep dirt into the machine and off the steps, with an added time setting to help maintain the escalators, The Rotomatic now has a self-cleaning mode which will help save time and money to keep the machine clean and maintained to high standard. The brushes are an effective and safe way to clean the step and do not damage the treads. The new illuminated panel is built to sustain substantial usage and common misuse. The machine is still mains operated. A new socket has been included that enables the T10 attachment to be connected to perform quick maintenance cleans or using Rotomatic-T10 combo as travellator cleaning device.

The Rotomatic escalator cleaning machine is easily transported on its trolley sits stationary on a still escalator. It sprays a fine mist of solution on to the step and the 15 rotating brushes deep clean and sweep all dirt into the vac and then into the recovery tank. There are 4 especially chosen brushes that do not damage aluminum or the painted surfaces however still remove tough dirt and grease.

The escalator surface is left clean and dry with no risk of contamination to lubricating oils in escalator drums or damage to electrical circuits. During the cleaning process the machine operator and there assistant removes all embedded foreign matter; which could damage the escalator combs and steps. An important aspect of this cleaning process is that all sand, dirt and spillage which would normally have combined with oil and grease to form a grinding paste in the escalator mechanism, are completely removed.

-Dramatic cost savings compared to conventional cleaning methods
-No need to remove the steps, cleaning done in-situ.
-Cleaning is undertaken on-site, after hours.
-Overnight cleaning ensuring the escalator is ready for traffic at the start of the day.
-The step and riser of the escalator are cleaned right to the edges in a single operation.
-Efficiently and effectively removes grease, spillage’s, stones, foreign objects, hardened sand and grinding paste (spillage combined with grease etc).
-Premises with clean escalators are more appealing, therefore attract more trade and develop a better reputation.
-Thoroughly cleaned escalators.
-No damage to escalators.
-No damage to electrical circuits and internal mechanisms.
-Controlled pre-set chemical and minimal water is sprayed through nozzles.
-Will not dilute the lubrication of the escalator mechanism.
-Immediate vacuuming of the dirty solution into holding tanks.
-Eliminates the danger of chains rusting, motors burning out, and damage to electrical circuits.
-Decreases escalator maintenance costs.
-Tested and officially endorsed by the world’s leading manufacturers.
-More efficient and cost effective than other methods.

Parts

  • Product
  • Qty in Cart
  • Quantity
  • Price
  • Subtotal
  • ships same day
    Non-OEM
     - Screw M5-.8 x 16mm pan head phillips stainless steel 999-0901

    Screw M5-.8 x 16mm pan head phillips stainless steel 999-0901

    $0.99
    Specifications:Weight: 0.1 poundsMaterial: Stainless steelMatches:06933101620710454871221516175-0445175-0452175-2963175-4102175-6467200051384200070384200613384219050219547235-0085240-04812911324088845521300125781440006.303-153.0630315307.306-182...
    $0.99
    Qty in Cart: 0
    Price:
    $0.99
    Subtotal:
  • ships same day
    Non-OEM
     - Screw M3-.5 x 6mm flat socket head stainless steel 999-0772

    Screw M3-.5 x 6mm flat socket head stainless steel 999-0772

    $0.99
    Specifications:Weight: 0.1 poundsMaterial: Stainless steelMatches:222465M42510006A20000RM00053Commonly purchased together:Fits on:Tennant 5680Tennant 5700 SERIESRosemor ROTOMATIC
    $0.99
    Qty in Cart: 0
    Price:
    $0.99
    Subtotal:
  • ships same day
    Non-OEM
     - Screw M5-.8 x 12mm flat head phillips stainless steel 999-1274

    Screw M5-.8 x 12mm flat head phillips stainless steel 999-1274

    $0.99
    Specifications:Weight: 0.1 poundsMaterial: Stainless steelMatches:4158177.303-058.070911730305808.617-297.080405A86172970E20468TE99953021XM2540012A20000Alternative items:Below are other options that may meet your needs.Nut 5/16-18 wing stainless steel$1...
    $0.99
    Qty in Cart: 0
    Price:
    $0.99
    Subtotal:
  • ships same day
    Non-OEM
     - Screw M8-1.25 x 20mm flat head stainless steel 999-1324

    Screw M8-1.25 x 20mm flat head stainless steel 999-1324

    $0.99
    Specifications:Weight: 0.1 poundsMaterial: Stainless steelMatches:175-2287175-3353222463792468669486091007580M42580020A20000RM00048TE99930102VTVT01352Commonly purchased together:May fit on these models - select model and diagram to confirmTennant...
    $0.99
    Qty in Cart: 0
    Price:
    $0.99
    Subtotal:
  • Total: items /

Adding your products to cart

Can't find what you need? Click here or call 1-800-USA-CLEAN
best live chat