AQUAMATIC SELECTRIC

• Parts
• Diagrams
• Manuals
• Docs

The Aquamatic Selectric carpet extractor is fast and easy to use. It leaves carpet clean and ready for traffic in no time at all. Set your speed, squeeze the hand grips and the Selectric power scrubs and vacuums an 18 inch (46 cm) path, extracting at a rate of 5,400 ft2 (500 m2) an hour.

Compact size and self-propelling drive makes the Aquamatic Selectric easy to maneuver. Turns away from the wall without backing up because steering caster is up front. The low profile makes it easy for operators to see what they're maneuvering around.

Touch & Go electronic controls govern the working speed. Just choose from four forward speeds or four reverse. Set your speed, squeeze the grips and go. Operation is that easy.

The "tank in tank" design makes for maximum productivity. Recovery automatically stops when tank is full.

The Aquamatic Selectric with the floating action of its cylindrical brush and vacuum pick-up shoe clears uneven floor surfaces too. Single wide-angle spray nozzle has large orifice, less down time.

Cord electric power means the Aquamatic Selectric will keep working as long as you want to. It also means the Selectric is light enough to be lifted by two people into a truck or van, so it's portable. Check out the many other features of this labor saving money maker.

The Aquamatic Selectric can also be used with a variety of optional hand tools for cleaning stairs or other hard to reach areas.

• Touch and Go™ electronic controls
• Four speeds forward and reverse
• 25 gallon (94 L) solution tank
• Center steering caster
• 75 foot (23 m) detachable power cord

Drive Motor 120 V/60 hz, 0.1 hp, 0.6 amp motor with belt drive to differential.
Speed Control Touch & Go™ electronic control panel with LED lights located on the top of the handle assembly gives speed selection as well as travel direction.
Travel Speeds Four speeds forward and reverse.
Power Cable Detachable 75 ft (22.5 m) 14/3 wire
Power Draw Max amp draw – 14.5 amps.
Brush Motor 1/3 hp, 120 V/60 hz, 3.5 amp, reversing motor, totally enclosed.
Brush Drive Poly-V belt
Brush 18 in (46 cm) long, 3 in (8 cm) diameter, nylon bristle with chevron pattern turns at 1,200 rpm. Floatation mounted, with foot operated brush-lift lever.
Solution Tank 25 gal (95 L), polyethylene.
Solution Pump diaphragm pump, rated 0.78 gpm (3 L/min) at 60 psi (4 bar)
Solution Control Automatic control in forward with an electric solenoid activated by squeezing the hand levers. Automatic shut-off in reverse. Single nozzle spray.
Vacuum Motor 120 V/60 hz, 1.5 hp, 10 amp, three-stage by-pass design. 99 cfm (2,800 L/min) with 2 in (5 cm) orifice. 117 in (297 cm) sealed waterlift.
Vacuum Shoe 20 in (51 cm) wide, stainless steel on floating mount.
Cleaning Path 18 in (46 cm)
Recovery Tank 15 gal (56 L) polyethylene, with float system to prevent overflow when tank is full. Drain hose is located at the rear of machine.
Dimensions Length – 46 in (117 cm) Width – 21 in (53 cm) Height – 39 in (100 cm)
Weight Net – 199 lb (90 kg Shipping – 229 lb (104 kg)