
This machine has a patented brush design that follows the floor profile and delivers nearly even pressure allocation along the full working width. Two brushes are offset to the side, allowing superior cleaning along walls and under racks. This results in excellent soil removal and floor appearance. The patented V-shaped squeegee allows excellent water pick-up on all floor types, even on structured and grouted/tiled floors. Special squeegee blades and a direct suction line allow pick-up of small debris without clogging. Due to the proven three-wheel concept, adjustments of the squeegee are no longer necessary.
All components needing frequent maintenance are color-coded in yellow and can be removed easily without tools. The dashboard is self-explanatory and displays all required information. Fewer parts to maintain and easy accessibility make the machine extremely service friendly. Interactive Service Guide
TASKI by Diversey SWINGO 1255B Parts and Support
The TASKI swingo 1255 B is a walk-behind auto scrubber. The machine’s patented IntelliFlow always ensures the right amount of cleaning solution on the floor and leads to significant water savings. This feature, in combination with the 16-gallon (60-L) tank volume, increases productivity and reduces time-consuming tank filling stops during the cleaning operation. The dual-axle system ensures easy handling and allows comfortable use of the machine.
This machine has a patented brush design that follows the floor profile and delivers nearly even pressure allocation along the full working width. Two brushes are offset to the side, allowing superior cleaning along walls and under racks. This results in excellent soil removal and floor appearance. The patented V-shaped squeegee allows excellent water pick-up on all floor types, even on structured and grouted/tiled floors. Special squeegee blades and a direct suction line allow pick-up of small debris without clogging. Due to the proven three-wheel concept, adjustments of the squeegee are no longer necessary.
All components needing frequent maintenance are color-coded in yellow and can be removed easily without tools. The dashboard is self-explanatory and displays all required information. Fewer parts to maintain and easy accessibility make the machine extremely service friendly.
This machine has a patented brush design that follows the floor profile and delivers nearly even pressure allocation along the full working width. Two brushes are offset to the side, allowing superior cleaning along walls and under racks. This results in excellent soil removal and floor appearance. The patented V-shaped squeegee allows excellent water pick-up on all floor types, even on structured and grouted/tiled floors. Special squeegee blades and a direct suction line allow pick-up of small debris without clogging. Due to the proven three-wheel concept, adjustments of the squeegee are no longer necessary.
All components needing frequent maintenance are color-coded in yellow and can be removed easily without tools. The dashboard is self-explanatory and displays all required information. Fewer parts to maintain and easy accessibility make the machine extremely service friendly.
Parts
Can't find what you need? Click here or call 1-800-USA-CLEAN
In the market for a new machine? You can find quality new and reconditioned floor care equipment at one of our vendor partners:
Need a professional? We offer service both virtually and in person.
Learn more

Diagrams
- View all diagrams
- - Frequently Replaced Parts
- - Batteries, Brushes and Charger - Machines Sold Before 2016
- - Batteries, Brushes and Charger - Machines Starting in 2016
- - Know Your Machine
- - Manufacturer Recommended Stocking Parts
- - Pad Holders
- - Pads
- - Simplified Electrical System
- - Simplified Recovery System
- - Simplified Solution System
- Accessories
- Battery Hookup Chart
- Brush Drive Assembly
- Drive Assembly
- Electrical Diagram
- Electrical Parts
- Hose and Filter Assembly
- Lower Assembly
- Squeegee Assembly - After SN 56427
- Squeegee Assembly - Before SN 56428
- Squeegee Lift Assembly
- Tank Assembly
- Tool Lowering Assembly
- Upper Assembly
Manuals
- Electronics Board Layout_2020
- New Drive Unit_2020
- New Firmware v1.30_2020
- TASKI swingo 1255B Service Manual
- TASKI swingo 450/750/755/855/1250/1255 Electronics Overview
- TASKI swingo 755B/855B/1255B Power User Manual
Bulletins
- Implementation of Soldered Cable_2021
- New Firmware v1.31_2020
- Optional Squeegee Rubber Blades 2019
- TASKI - swingo 455B, 755B, 855B, 1255B, 1650, 1850B and 2100 - Solenoid Update 2018
- TASKI swingo 750B/755B/855B/1250B/1255B/1650B/2500/3500/4000/5000 JFit Installation
- TASKI swingo 755/855/1255 New Jumper Position
- TASKI swingo 755B Power/855B/1255B Service Light Reset
- TASKI swingo TSS Bulletin - How the Key Switch Works
- TASKI TSS Bulletin - Rating Plate Breakdown
Videos
Repair Guides
- Check Brush for Damage
- Check Linkage for Functionality
- Replace Brush
- Replace Damaged Linkage
- Replace the Linkage
- Replace the Handle Mechanics
- Check Solenoid Wiring
- Check the brush micro switch
- Check the Charger Plug
- Check the FWD/REV switch assembly
- Check the Power Board Voltage for the Primary Components
- Check Vacuum Motor Wiring
- Replace Solenoid Wiring
- Replace the brush micro switch
- Replace the FWD/REV switch assembly
- Replace the Power Plug
- Replace the Solenoid Valve
- Replace the Vacuum Motor Wiring
- Check Casters
- Check the transaxle
- Check the Wheels
- Replace the Casters
- Replace the Wheels
- Check Drain Hose for Damage (make sure it has red cap)
- Check Filter Screen
- Check for Power to the Motor
- Check for Stuck Float
- Check Recovery Tank Lid Seal
- Check To Make Sure Tank Cover Seals When Closed
- Check Vacuum Hose Condition
- Check Vacuum Hose Connection
- Check Vacuum Hose for Clogs
- Check Vacuum Motor
- Replace Casters
- Replace Float
- Replace the Drain Hose
- Replace the Filter Screen
- Replace the Recovery Tank Lid Seal
- Replace the Squeegee Blades
- Replace the Vacuum Hose
- Replace the Vacuum Motor
- Check computer requirements.
- Check if correct USB is being used.
- Check if current Service Tool has been downloaded to Desktop.
- Check that default drivers are not being used.
- Check that machine is on.
- Check that Service Tool has reconnected after firmware download.
- Check that the appropriate firmware has been selected.
- Check that the Service Tool and machine are still connected.
- Check tool requirements.
- Click the download start button.
- Connect Service Tool to appropriate machine.
- Make sure connection is not lost during download process.
- Select the correct driver.
- USB cable needs to connect machine to computer.
- Check all hoses and fittings for leaks
- Check for power to the solenoid valve
- Check the filter housing for leaks
- Check the tank for leaks
- Clean and Replace the Solution Filter
- Replace the solenoid valve
- Replacing the filter housing
Docs
- TASKI - swingo 350B/E, 455B, 755B, 855B, 1255B, 1650B, 1850B - Warranty
- TASKI Floor Pad Matrix
- Taski Service Tool and Firmware 8.30
- TASKI swingo 1255B - Maintenance Schedule
- Taski Swingo 1255B Brochure
- TASKI swingo 1255B Standard Repair Time
- TASKI swingo 1255B wall chart
- TASKI swingo 350B&E, 455B,755B,855B,1255B,1650B,1850B Limited Warranty as of November 2014