null

ADVOLUTION 2710

ADVOLUTION 2710

Nilfisk-Advance ADVOLUTION 2710

The Advolution 2710 rider-burnisher enables quick, comfortable burnishing with superior results. Battery-operated, with a maneuverable front-steering system, the Advolution 2710 eliminates the emissions and noise associated with propane burnishers.

The Advolution 2710 rider-burnisher provides maximum productivity with its extended battery run-time. On a single battery charge, the 2710 is capable of covering over 135,000 ft2 (12,500 m2), Average productivity exceeds 30,000 ft2/hr (2,800 m2/hr). The machine automatically monitors and controls pad pressure to ensure superior gloss levels. The floating burnishing head, coupled with a flexible pad driver, follows uneven floor contours to provide a consistent shine.

Operators of the Advolution 2710 rider-burnisher ca expect uncompromising safety. Open sight lines in front of the machine create a safe and comfortable ride for the operator, while automatic safeguards prevent unmanned startups that can lead to damaged floor finish. A safety switch prevents accidental pad start-up in the tilt up position. Passive dust-control is standard on the Advolution 2710 rider-burnisher, which reduces the need for dust-mopping.

Pad Motor 3.25 hp
Pad Driver 27 in (68.6 cm) flexible pad driver with 3.5 in (9 cm) centering device.
Pad Motor Speed No Load 1,760 RPM / Under load 1,500 RPM
Max Productivity Per hour: 41,580 ft2
/hr (3,863 m2
/hr)
at 3.5 mph (5.6 km/hr) Per battery charge: 137,214 ft² (12,748 m²)
Pad Access Pivoting burnishing head for easy pad access; safety switch prevents
accidental startup when burnishing head is tilted up.
Pad Pressure Adjustment Variable between 3 settings; 50-75 lb
Electronic pad pressure system automatically controls consistency of
pad pressure to maximize performance based on the setting selected.
Body Construction All steel chassis and rotational molded body. Steel burnishing head linkage
and steering column.
Dust Control Passive dust control standard.
Drive System 1 hp, 700 W permanent magnet motor with gear transmission and non-marking wheel.
0-4.5 mph (0-7.2 km/hr) transport; 0-3.5 mph (0-5.6 km/hr) burnishing.
Automatic electromechanical parking brake.
Wheels Two 12 in (30.5 cm) diameter non-marking rear wheels.
Power Source 6 - 6V DC / 420 Ah wet or 312 Ah AGM batteries
Operator Interface Tilt steering and adjustable seat with deadman safety switch.
Sound Level 69 dB A @ operator position
Minimum Aisle Turn Width 72 inches (183 cm)
Gradeability: Cleaning 12.3% (7°)
Dimensions Length 65.5 inches (166 cm) Height 54 inches (137 cm) Width 32 inches (81 cm)
Gross Weight Without batteries 484 lb (220 kg) / With batteries 1,379 lbs / 625 kg

ADVOLUTION 2710
The Advolution 2710 rider-burnisher enables quick, comfortable burnishing with superior results. Battery-operated, with a maneuverable front-steering system, the Advolution 2710 eliminates the emissions and noise associated with propane burnishers.

The Advolution 2710 rider-burnisher provides maximum productivity with its extended battery run-time. On a single battery charge, the 2710 is capable of covering over 135,000 ft2 (12,500 m2), Average productivity exceeds 30,000 ft2/hr (2,800 m2/hr). The machine automatically monitors and controls pad pressure to ensure superior gloss levels. The floating burnishing head, coupled with a flexible pad driver, follows uneven floor contours to provide a consistent shine.

Operators of the Advolution 2710 rider-burnisher ca expect uncompromising safety. Open sight lines in front of the machine create a safe and comfortable ride for the operator, while automatic safeguards prevent unmanned startups that can lead to damaged floor finish. A safety switch prevents accidental pad start-up in the tilt up position. Passive dust-control is standard on the Advolution 2710 rider-burnisher, which reduces the need for dust-mopping.

Pad Motor 3.25 hp
Pad Driver 27 in (68.6 cm) flexible pad driver with 3.5 in (9 cm) centering device.
Pad Motor Speed No Load 1,760 RPM / Under load 1,500 RPM
Max Productivity Per hour: 41,580 ft2
/hr (3,863 m2
/hr)
at 3.5 mph (5.6 km/hr) Per battery charge: 137,214 ft² (12,748 m²)
Pad Access Pivoting burnishing head for easy pad access; safety switch prevents
accidental startup when burnishing head is tilted up.
Pad Pressure Adjustment Variable between 3 settings; 50-75 lb
Electronic pad pressure system automatically controls consistency of
pad pressure to maximize performance based on the setting selected.
Body Construction All steel chassis and rotational molded body. Steel burnishing head linkage
and steering column.
Dust Control Passive dust control standard.
Drive System 1 hp, 700 W permanent magnet motor with gear transmission and non-marking wheel.
0-4.5 mph (0-7.2 km/hr) transport; 0-3.5 mph (0-5.6 km/hr) burnishing.
Automatic electromechanical parking brake.
Wheels Two 12 in (30.5 cm) diameter non-marking rear wheels.
Power Source 6 - 6V DC / 420 Ah wet or 312 Ah AGM batteries
Operator Interface Tilt steering and adjustable seat with deadman safety switch.
Sound Level 69 dB A @ operator position
Minimum Aisle Turn Width 72 inches (183 cm)
Gradeability: Cleaning 12.3% (7°)
Dimensions Length 65.5 inches (166 cm) Height 54 inches (137 cm) Width 32 inches (81 cm)
Gross Weight Without batteries 484 lb (220 kg) / With batteries 1,379 lbs / 625 kg

Nilfisk-Advance ADVOLUTION 2710 Parts and Support

the advolution 2710 rider-burnisher enables quick, comfortable burnishing with superior results. battery-operated, with a maneuverable front-steering system, the advolution 2710 eliminates the emissions and noise associated with propane burnishers.

the advolution 2710 rider-burnisher provides maximum productivity with its extended battery run-time. on a single battery charge, the 2710 is capable of covering over 135,000 ft2 (12,500 m2), average productivity exceeds 30,000 ft2/hr (2,800 m2/hr). the machine automatically monitors and controls pad pressure to ensure superior gloss levels. the floating burnishing head, coupled with a flexible pad driver, follows uneven floor contours to provide a consistent shine.

operators of the advolution 2710 rider-burnisher ca expect uncompromising safety. open sight lines in front of the machine create a safe and comfortable ride for the operator, while automatic safeguards prevent unmanned startups that can lead to damaged floor finish. a safety switch prevents accidental pad start-up in the tilt up position. passive dust-control is standard on the advolution 2710 rider-burnisher, which reduces the need for dust-mopping.

pad motor 3.25 hp
pad driver 27 in (68.6 cm) flexible pad driver with 3.5 in (9 cm) centering device.
pad motor speed no load 1,760 rpm / under load 1,500 rpm
max productivity per hour: 41,580 ft2
/hr (3,863 m2
/hr)
at 3.5 mph (5.6 km/hr) per battery charge: 137,214 ft² (12,748 m²)
pad access pivoting burnishing head for easy pad access; safety switch prevents
accidental startup when burnishing head is tilted up.
pad pressure adjustment variable between 3 settings; 50-75 lb
electronic pad pressure system automatically controls consistency of
pad pressure to maximize performance based on the setting selected.
body construction all steel chassis and rotational molded body. steel burnishing head linkage
and steering column.
dust control passive dust control standard.
drive system 1 hp, 700 w permanent magnet motor with gear transmission and non-marking wheel.
0-4.5 mph (0-7.2 km/hr) transport; 0-3.5 mph (0-5.6 km/hr) burnishing.
automatic electromechanical parking brake.
wheels two 12 in (30.5 cm) diameter non-marking rear wheels.
power source 6 - 6v dc / 420 ah wet or 312 ah agm batteries
operator interface tilt steering and adjustable seat with deadman safety switch.
sound level 69 db a @ operator position
minimum aisle turn width 72 inches (183 cm)
gradeability: cleaning 12.3% (7°)
dimensions length 65.5 inches (166 cm) height 54 inches (137 cm) width 32 inches (81 cm)
gross weight without batteries 484 lb (220 kg) / with batteries 1,379 lbs / 625 kg

Parts

  • Product
  • Qty in Cart
  • Quantity
  • Price
  • Subtotal
  • ships same day
    Non-OEM
     - Battery jumper cable - ring type (red) 998-0010

    Battery jumper cable - ring type (red) 998-0010

    $5.17
    Specifications:Weight: 0.1 poundsType: BatteryMatches:130364164-0375164-6312164-6831170-0234173-8348175-2529175-3142175-3439175-344022335522335623-9-1981239198141206A6373564-132-164-132164-9-132-164-9-132164132164913217006045032898.682-784...
    $5.17
    Qty in Cart: 0
    Price:
    $5.17
    Subtotal:
  • ships same day
    Non-OEM
     - Key (pkg of 2) 991-1634

    Key (pkg of 2) 991-1634

    $16.50
    If ordering for a TomCat machine, this is for machines purchased in 02.2006 or after and SN 44180 and after.Specifications:Weight: 0.2 poundsMatches:101769614608060001462887000172-7670175-3761175-7873181-1740202-2301203-1256290-234A46...
    $16.50
    Qty in Cart: 0
    Price:
    $16.50
    Subtotal:
  • ships same day
    Non-OEM
     - 6 inch cable tie 997-2101

    6 inch cable tie 997-2101

    $0.99
    Matches:047085172-0188182-0137182-06072380446713-54782465647824656802-263123632243Alternative items:Below are other options that may meet your needs.Screw 1/4-28 x 3/4 socket head alloy plain finish$0.99999-1202Commonly purchased together:May fit on...
    $0.99
    Qty in Cart: 0
    Price:
    $0.99
    Subtotal:
  • ships same day
    Non-OEM
     - 175amp charger plug with pins (gray) SB175 991-2112

    175amp charger plug with pins (gray) SB175 991-2112

    $14.29
    Specifications:Weight: 0.225 poundsMatches:173-3590189-8211192-27502289237140864-9-184164918418.600-876.08.806-825.0806828600876086640790AS32400E010878K19603-47K4121920P-3P175GP1Alternative items:Below are other options that may meet your needs.Connector...
    $14.29
    Qty in Cart: 0
    Price:
    $14.29
    Subtotal:
  • OEM
    454740 - 5K potentiometer 172-2039

    5K potentiometer 172-2039

    $59.92
    Specifications:Weight: 0.05 poundsType: PotentiometerMatches:08812292164-0295172-0572172-241826-9-4131269413139702945474056397029564547407015312570153162753-1445753144586728150991-9024L08812292Alternative items:Below are other options that may meet your...
    $59.92
    Qty in Cart: 0
    Price:
    $59.92
    Subtotal:
  • Non-OEM
    25940-04 WET/AGM - 36V 20amp battery charger with SB175 large gray plug 162-5063

    36V 20amp battery charger with SB175 large gray plug 162-5063

    $375.75
    Specifications:Weight: 41.6 poundsAmp Hours: 20Volts: 36Chemical Makeup: WetType: Off boardCharger Plug Color: GrayCharger Plug Size: Large 175AMatches:162-506325940-04 WET/AGM7006045037229.110-198.0910280409110198098483400C2036H W/SB175 GRAY...
    $375.75
    Qty in Cart: 0
    Price:
    $375.75
    Subtotal:
  • ships same day
    Non-OEM
     - Brush roll belt rubber (black) 991-0026

    Brush roll belt rubber (black) 991-0026

    $1.96
    Belt fits Alto-Clarke Symphony 12 and 16, 512P, 530, Eureka Sanitaire (all series), Quick Kleen, Boss, Euroclean Pro12 and 16, Hawk Powerline, Kent Selectvac, Nilfisk-Advance Reliavac, Advac, Nobles TV1200, Tornado CarpetKeeper and CarpetKeeper Duo. If...
    $1.96
    Qty in Cart: 0
    Price:
    $1.96
    Subtotal:
  • OEM
    372673 - Battery cable boot 172-0223

    Battery cable boot 172-0223

    $9.54
    Specifications:Weight: 0.01 poundsMatches:05418608812093172-2443181-0028272-9296372673560541865637267386643660L08812093Commonly purchased together:Fits on:Nilfisk-Advance WARRIOR 34RSTNilfisk-Advance CONVERTAMATIC 26D-CNilfisk-Advance WHIRLAMATIC...
    $9.54
    Qty in Cart: 0
    Price:
    $9.54
    Subtotal:
  • Total: items /

Adding your products to cart

Can't find what you need? Click here or call 1-800-USA-CLEAN
In the market for a new machine? You can find quality new and reconditioned floor care equipment at one of our vendor partners:
best live chat