Simplicity in design reduces downtime. Direct drive to the brush and pad holder eliminated the need for belts and pulleys. With the convenience of cord-electric operation, the 17 or 20 UHS is ready when you are. Their size and low profile makes them maneuverable in obstructed areas. The 20 UHS burnishers at a rate of 10,000 sq ft (925 m2) an hour; 9,100 sq ft (840 m2) for the 17 UHS.
Operation is simple and safe because they move along without side-to-side torque. Large non-marking wheels make them easy to transport.
Motor: 1.5 hp, 115V/60Hz, rectified DC, 1.5 hp, 100V/50-60 or 230V/50 Hz models available)
Brush or Pad Holders: Permanently attached 17 in(43 cm) or 20 in (51 cm) burnishing brush. Permanently attached 17 in (43 cm) or 20 in (51 cm) pad holder
Pad speed: 1,500 rpm
Wheels: Four 4 in (10 cm) operating and transport wheels made of non-marking rubber
Transmission: Direct drive from motor shaft
Cable length: 75 ft (23 m)
Construction: Cast aluminum skirt housing, malleable iron and pentagonal steel handle with baked-on powder paint finish. Non-marking bumper surrounds housing. ABS motor housing and cover
Dimensions
Width: 21 in (53cm)
Length: 24 in (61 cm)
Height: 47 in (119 cm)
Net weight: 85 lb (38.5 kg) with brush, 106 lb ( 48 kg) with pad holder
Nilfisk-Advance WHIRLAMATIC UHS20 Parts and Support
for superior performance, durability and simple operation, depend on the whirlamatic 17 or 20 uhs. these 17 and 20 inch (43 & 51 cm) cord-electric burnishers gives floors a mirror-like shine in one pass. incorporated into both are performance features that ensure maximum productivity. an exclusive constant flo design uses a patented torsions spring design to eliminate any operational variances and the need for caster wheels, making burnishing almost foolproof. neither uneven floors nor operator inexperience can affect the brush/pad pressure. weight is evenly maintained while brush/pad turns at 1500 rpms. the result is a consistent luster across the floor.
simplicity in design reduces downtime. direct drive to the brush and pad holder eliminated the need for belts and pulleys. with the convenience of cord-electric operation, the 17 or 20 uhs is ready when you are. their size and low profile makes them maneuverable in obstructed areas. the 20 uhs burnishers at a rate of 10,000 sq ft (925 m2) an hour; 9,100 sq ft (840 m2) for the 17 uhs.
operation is simple and safe because they move along without side-to-side torque. large non-marking wheels make them easy to transport.
motor: 1.5 hp, 115v/60hz, rectified dc, 1.5 hp, 100v/50-60 or 230v/50 hz models available)
brush or pad holders: permanently attached 17 in(43 cm) or 20 in (51 cm) burnishing brush. permanently attached 17 in (43 cm) or 20 in (51 cm) pad holder
pad speed: 1,500 rpm
wheels: four 4 in (10 cm) operating and transport wheels made of non-marking rubber
transmission: direct drive from motor shaft
cable length: 75 ft (23 m)
construction: cast aluminum skirt housing, malleable iron and pentagonal steel handle with baked-on powder paint finish. non-marking bumper surrounds housing. abs motor housing and cover
dimensions
width: 21 in (53cm)
length: 24 in (61 cm)
height: 47 in (119 cm)
net weight: 85 lb (38.5 kg) with brush, 106 lb ( 48 kg) with pad holder
simplicity in design reduces downtime. direct drive to the brush and pad holder eliminated the need for belts and pulleys. with the convenience of cord-electric operation, the 17 or 20 uhs is ready when you are. their size and low profile makes them maneuverable in obstructed areas. the 20 uhs burnishers at a rate of 10,000 sq ft (925 m2) an hour; 9,100 sq ft (840 m2) for the 17 uhs.
operation is simple and safe because they move along without side-to-side torque. large non-marking wheels make them easy to transport.
motor: 1.5 hp, 115v/60hz, rectified dc, 1.5 hp, 100v/50-60 or 230v/50 hz models available)
brush or pad holders: permanently attached 17 in(43 cm) or 20 in (51 cm) burnishing brush. permanently attached 17 in (43 cm) or 20 in (51 cm) pad holder
pad speed: 1,500 rpm
wheels: four 4 in (10 cm) operating and transport wheels made of non-marking rubber
transmission: direct drive from motor shaft
cable length: 75 ft (23 m)
construction: cast aluminum skirt housing, malleable iron and pentagonal steel handle with baked-on powder paint finish. non-marking bumper surrounds housing. abs motor housing and cover
dimensions
width: 21 in (53cm)
length: 24 in (61 cm)
height: 47 in (119 cm)
net weight: 85 lb (38.5 kg) with brush, 106 lb ( 48 kg) with pad holder
Parts
Can't find what you need? Click here or call 1-800-USA-CLEAN
In the market for a new machine? You can find quality new and reconditioned floor care equipment at one of our vendor partners:
Need a professional? We offer service both virtually and in person.
Learn more
